journal article·2020-02

Tailoring the interfaces of silicon/carbon nanotube for high rate lithium-ion battery anodes

Ziqi Zhang, Xiang Han, Lianchuan Li, Pengfei Su, Wei Huang, Jianyuan Wang, Jianfang Xu, Cheng Li, Songyan Chen, Yong Yang

Publisher page

Abstract

Abstract Micrometer-sized silicon powders, due to its high specific capacity, easy accessibility, and low cost, have been regarded as an attractive anode material for lithium-ion batteries. The severer mechanical instability and high inter-particle resistance during cycling, however, hinder its further application. In this work, a novel potholed micrometer-sized silicon powders (PMSi)/carbon nanotubes (CNT)/C electrode is proposed. The resulting three-dimensional (3D) conductive framework and multi-point contact network exhibit ideal structural stability and high-rate cycling property. Hence, the volume resistivity of PMSi/CNT/C (157 Ω m) is reduced significantly relative to traditional PMSi/commercial carbon nanotubes (CCT)/C composite (400 Ω m). By testing the fabricated half-cell LIB with the PMSi/CNT/C composite anode, high reversible specific capacity of 2533 mAh g−1 with a remarkable high initial coulombic efficiency of 89.07% and over 840 mA h g−1 for 1000 cycles at 2 A g−1 is measured. Even at the rate of 20 A g−1, the PMSi/CNT/C electrode shows a capacity of 463 mAh g−1. A full cell contained the PMSi/CNT/C anode and a LiFePO4/LiMn2O4 cathode successfully ignites an LED array (~1.5 W), further demonstrating its outstanding electrical driving property.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. High-performance lithium-ion anodes using a hierarchical bottom-up approach10.1038/nmat2725 ↗
2. Building better batteries10.1038/451652a ↗
3. Engineered Si electrode nanoarchitecture: a scalable postfabrication treatment for the production of next-generation Li-ion batteries10.1021/nl403943g ↗
4. Materials for electrochemical capacitors10.1038/nmat2297 ↗
5. Battery materials for ultrafast charging and discharging10.1038/nature07853 ↗
6. 25th anniversary article: understanding the lithiation of silicon and other alloying anodes for lithium-ion batteries10.1002/adma.201301795 ↗
7. Boron-doped porous Si anode materials with high initial coulombic efficiency and long cycling stability10.1039/C7TA10153H ↗
8. Silicon as a potential anode material for Li-ion batteries: where size, geometry and structure matter10.1039/C5NR05116A ↗
9. Designing nanostructured Si anodes for high energy lithium ion batteries10.1016/j.nantod.2012.08.004 ↗
10. Well-constructed silicon-based materials as high-performance lithium-ion battery anodes10.1039/C5NR06278K ↗
11. Advances in the application of silicon and germanium nanowires for high-performance lithium-ion batteries10.1002/adma.201503978 ↗
12. Protecting silicon film anodes in lithium-ion batteries using an atomically thin graphene drape10.1021/acsnano.7b01780 ↗
13. Nonfilling carbon coating of porous silicon micrometer-sized particles for high-performance lithium battery anodes10.1021/nn505410q ↗
14. Stable cycling of double-walled silicon nanotube battery anodes through solid-electrolyte interphase control10.1038/nnano.2012.35 ↗
15. Harnessing the concurrent reaction dynamics in active Si and Ge to achieve high performance lithium-ion batteries10.1039/C8EE00239H ↗
16. Scalable approach to multi-dimensional bulk Si anodes via metal-assisted chemical etching10.1039/c1ee02310a ↗
17. Controllable synthesis of hollow Si anode for long-cycle-life lithium-ion batteries10.1002/adma.201400578 ↗
18. Carbon nanotube electronics10.1109/JPROC.2003.818338 ↗
19. Self-standing silicon-carbon nanotube/graphene by a scalable in situ approach from low-cost Al-Si alloy powder for lithium ion batteries10.1016/j.jpcs.2017.05.009 ↗
20. A silicon-impregnated carbon nanotube mat as a lithium-ion cell anode10.1007/s10800-017-1140-8 ↗
21. A-few-second synthesis of silicon nanoparticles by gas-evaporation and their self-supporting electrodes based on carbon nanotube matrix for lithium secondary battery anodes10.1016/j.jpowsour.2017.07.115 ↗
22. Rational design of hierarchical carbon/mesoporous silicon composite sponges as high-performance flexible energy storage electrodes10.1021/acsami.7b05032 ↗
23. Microscopic growth mechanisms for carbon nanotubes10.1126/science.275.5300.647 ↗
24. Growth of straight nanotubes with a cobalt-nickel catalyst by chemical vapor deposition10.1063/1.123027 ↗
25. Capitalization of interfacial AlON interactions to achieve stable binder-free porous silicon/carbon anodes10.1039/C8TA01029C ↗
26. Carbon-coated Si micrometer particles binding to reduced graphene oxide for a stable high-capacity lithium-ion battery anode10.1039/C6TA07274G ↗
27. Interfacial nitrogen stabilizes carbon-coated mesoporous silicon particle anodes10.1039/C5TA08297H ↗
28. A peanut shell inspired scalable synthesis of three-dimensional carbon coated porous silicon particles as an anode for lithium-ion batteries10.1016/j.electacta.2015.01.051 ↗
29. Continued growth of single-walled carbon nanotubes10.1021/nl047851f ↗
30. Catalytically assisted tip growth mechanism for single-wall carbon nanotubes10.1021/nn700049q ↗
31. Micron-sized Fe–Cu–Si ternary composite anodes for high energy Li-ion batteries10.1039/C6EE00023A ↗
32. Fabrication and understanding of Cu3Si-Si@carbon@graphene nanocomposites as high-performance anodes for lithium-ion batteries10.1039/C8NR07207H ↗
33. Silicon nanowires coated with copper layer as anode materials for lithium-ion batteries10.1016/j.jpowsour.2010.12.075 ↗
34. Optical studies OF pyrolyzed polyacrylonitrile10.1002/pol.1984.180220708 ↗
35. Sers studies OF polymers ON metal-surfaces .4. Cyclization and graphitization OF polyacrylonitrile ON rough silver surfaces10.1021/ma00047a044 ↗
36. Nanostructured hybrid silicon/carbon nanotube heterostructures: reversible high-capacity lithium-ion anodes10.1021/nn901632g ↗
37. A multilayer Si/CNT coaxial nanofiber LIB anode with a high areal capacity10.1039/C3EE43350A ↗
38. Silicon decorated cone shaped carbon nanotube clusters for lithium ion battery anodes10.1002/smll.201400088 ↗
39. Carbon nanotubes as a secondary support of a catalyst layer in a gas diffusion electrode for metal air batteries10.1016/j.jcis.2004.10.067 ↗
40. Electrochemical characterisation of air electrodes based on La0.6Sr0.4CoO3 and carbon nanotubes10.1016/j.jpowsour.2008.05.042 ↗
41. Physical interpretations of nyquist plots for EDLC electrodes and devices10.1021/acs.jpcc.7b10582 ↗
42. A hierarchical porous C@LiFePO4/carbon nanotubes microsphere composite for high-rate lithium-ion batteries: combined experimental and theoretical study10.1002/aenm.201600426 ↗
43. High rate and long cycle life of a CNT/rGO/Si nanoparticle composite anode for lithium-ion batteries10.1002/ppsc.201700141 ↗
44. Superionic solids: composite electrolyte phase - an overview10.1023/A:1004598902146 ↗
45. Electron-ion interference and onsager reciprocity in mixed ionic-electronic transport in TiO210.1103/PhysRevLett.97.255901 ↗
46. Simple method to determine electronic and ionic components of the conductivity in mixed conductors A review10.1007/BF02376083 ↗
47. FORMATION, oxidation, electronic, and electrical-properties OF copper silicides10.1063/1.345369 ↗
48. The Schottky barrier height of the rectifying Cu/pyronline-B/p-Si, Au/pyronine-B/p-Si, Sn/pyronine-B/p-Si and Al/pyronine-B/p-Si contacts10.1016/j.synthmet.2003.08.009 ↗