journal article·2019-07

Minimizing mass-transport loss in proton exchange membrane fuel cell by freeze-drying of cathode catalyst layers

Krishan Talukdar, Sofia Delgado, Tiago Lagarteira, Pawel Gazdzicki, K. Andreas Friedrich

Publisher page

Abstract

Abstract The widespread commercialisation of proton exchange membrane fuel cell (PEMFC) for either transportation or stationary application is still hindered by cost barriers owing to the use of precious metal catalysts, as well as performance and material related insufficient durability. Therefore, it is important to enhance the platinum utilization as well as optimize the fabrication method for the production of membrane electrode assemblies (MEAs). This study demonstrates that the drying step during the electrode manufacturing directly affects the microstructure of the catalyst layer, having inherent influence on the porosity and the platinum utilization during PEMFC operation that greatly affects the performance. Freeze-drying as a novel drying technique for PEMFC electrodes is proposed for preparation of low Pt-loaded cathodes (0.160 mgPt·cm−2). This technique possesses the unique feature of solvent removal via sublimation and not only generates 3.5-fold higher effective porosities but also increases the electrochemical surface area by 1.5 times when comparing to electrode dried by regular oven drying technique. Additionally, freeze-drying of electrode also improved ionomer distribution, as evident from a reduced resistance between the pores and a reduced electrolyte resistance of the catalyst layer. Consequently, we consider freeze-drying to be a highly promising technique for future production of MEAs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Platinum dissolution in fuel cell electrodes: enhanced degradation from surface area assessment in automotive accelerated stress tests10.1149/2.0371510jes ↗
2. Discrete regenerative fuel cell reduces hysteresis for sustainable cycling of water10.1038/srep04592 ↗
3. An evaluation of the macro-homogeneous and agglomerate model for oxygen reduction in PEMFCs10.1016/S0013-4686(98)00136-4 ↗
4. Composition and performance modelling of catalyst layer in a proton exchange membrane fuel cell10.1016/S0378-7753(98)00161-X ↗
5. Mench · 2012
6. Recent advances in activity and durability enhancement of Pt/C catalytic cathode in PEMFC: Part II: degradation mechanism and durability enhancement of carbon supported platinum catalyst10.1016/j.jpowsour.2007.07.048 ↗
7. Fabrication of high precision PEFC membrane electrode assemblies10.1016/S0378-7753(03)00735-3 ↗
8. Influence of Nafion loading in the catalyst layer of gas-diffusion electrodes for PEFC10.1016/S0378-7753(98)00186-4 ↗
9. The triple phase boundary: a mathematical model and experimental investigations for fuel cells10.1149/1.1851054 ↗
10. The Pt/Nafion/air triple phase boundary: model, experiment, and implications for PEM fuel cells
11. Review and analysis of PEM fuel cell design and manufacturing10.1016/S0378-7753(02)00542-6 ↗
12. Analysis of Inkjet printed catalyst coated membranes for polymer electrolyte electrolyzers10.1149/2.1101807jes ↗
13. High performance of electrode with low Pt loading prepared by simplified direct screen printing process in PEM fuel cells10.1023/B:JMSC.0000034162.92123.96 ↗
14. Manufacturing of membrane electrode assemblies for fuel cells
15. Determination of ionic and electronic resistivities in carbon/polyelectrolyte fuel-cell composite electrodes10.1149/1.1516771 ↗
16. Thin-film catalyst layers for polymer electrolyte fuel cell electrodes10.1007/BF01093004 ↗
17. High performance catalyzed membranes of ultra-low Pt loadings for polymer electrolyte fuel cells10.1149/1.2069277 ↗
18. Plasma sputtering deposition of PEMFC porous carbon platinum electrodes10.1002/fuce.200700036 ↗
19. Sublayers for Pt catalyst electrodeposition electrodes in PEMFC10.1016/j.ijhydene.2010.07.112 ↗
20. Catalyst layer optimization by surface tension control during ink formulation of membrane electrode assemblies in proton exchange membrane fuel cell10.1016/j.jpowsour.2011.01.010 ↗
21. Role of freeze drying in nanotechnology10.1080/07373930601161179 ↗
22. Performance data of a proton exchange membrane fuel cell using H2∕CO as fuel gas10.1149/1.1837305 ↗
23. Structural and electrochemical characterisation of Pr0.7Ca0.3Cr1−yMnyO3−δ as symmetrical solid oxide fuel cell electrodes10.1016/j.jpowsour.2008.11.050 ↗
24. Electrocatalytic performance of fuel cell reactions at low catalyst loading and high mass transport10.1039/c3cp44431g ↗
25. Effect of pore structure of catalyst layer in a PEMFC on its performance10.1016/S0360-3199(02)00156-8 ↗
26. Zhang · 2018
27. Freeze-Drying of proteins Part I : process design
28. Design of freeze-drying processes for pharmaceuticals: practical advice10.1023/B:PHAM.0000016234.73023.75 ↗
29. Solid lipid nanoparticles: production, characterization and applications10.1016/S0169-409X(01)00105-3 ↗
30. Freeze-drying of nanostructure lipid carriers by different carbohydrate polymers used as cryoprotectants10.1016/j.carbpol.2012.01.051 ↗
31. Physical and electrochemical evaluation of commercial carbon black as electrocatalysts supports for DMFC applications10.1016/j.jpowsour.2007.08.032 ↗
32. Use of polypyrrole in catalysts for low temperature fuel cells10.1039/c3ee23520c ↗
33. Highly active screen-printed IrTi4O7 anodes for proton exchange membrane electrolyzers10.1016/j.ijhydene.2018.02.179 ↗
34. Céondo GmbH · 2016
35. The effects of Nafion® ionomer content in PEMFC MEAs prepared by a catalyst-coated membrane (CCM) spraying method10.1016/j.ijhydene.2009.11.058 ↗
36. Cooling rate and ice crystal measurement in biological specimens plunged into liquid ethane, propane, and Freon 2210.1111/j.1365-2818.1990.tb03008.x ↗
37. An improved method for the calculation of pore size distribution from adsorption data10.1002/jctb.5010140302 ↗
38. In situ PEM fuel cell electrochemical surface area and catalyst utilization measurement
39. Preparation and characterization of highly dispersed electrocatalytic materials
40. Hafez · 2014 · vol. 4
41. On the micro-, meso-, and macroporous structures of polymer electrolyte membrane fuel cell catalyst layers10.1021/am900600y ↗
42. Effects of carbon supports on Pt distribution, ionomer coverage and cathode performance for polymer electrolyte fuel cells10.1016/j.jpowsour.2016.02.091 ↗
43. Mesoporosity as a new parameter for understanding tension stress generation in trees10.1093/jxb/erp133 ↗
44. Fabrication of microstructure controlled cathode catalyst layers and their effect on water management in polymer electrolyte fuel cells10.1016/j.electacta.2011.05.123 ↗
45. Proton conduction in PEM fuel cell cathodes: effects of electrode thickness and ionomer equivalent weight10.1149/1.3435323 ↗
46. Combined electrochemical and surface analysis investigation of the degradation process in polymer membrane fuel cells10.1016/j.electacta.2006.05.063 ↗
47. Characterization of ionic conductivity profiles within proton exchange membrane fuel cell gas diffusion electrodes by impedance spectroscopy10.1149/1.1390804 ↗
48. Ionic conductivity of PEMFC electrodes10.1149/1.1611493 ↗
49. Comparison of reaction energetics for oxygen reduction reactions on Pt(100), Pt(111), Pt/Ni(100), and Pt/Ni(111) surfaces: a first-principles study10.1021/jp400388v ↗
50. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
51. Enveloping of catalyst powder by ionomer for dry spray coating in polymer electrolyte fuel cells10.1016/j.jpowsour.2019.03.093 ↗
52. Quantitative in situ analysis of ionomer structure in fuel cell catalytic layers10.1021/acsami.6b07188 ↗