A fully spray-coated fuel cell membrane electrode assembly using Aquivion ionomer with a graphene oxide/cerium oxide interlayer
Source abstract
Abstract
Abstract A novel multilayer membrane electrode assembly (MEA) for polymer electrolyte membrane fuel cells (PEMFCs) is fabricated in this work, within a single spray-coating device. For the first time, direct membrane deposition is used to fabricate a PEMFC by spraying the short-side-chain ionomer Aquivion directly onto the gas diffusion electrodes. The fully sprayed MEA, with an Aquivion membrane 10 μm in thickness, achieved a high power density of 1.6 W/cm2 for H2/air operation at 300 kPaabs. This is one of the highest reported values for thin composite membranes operated in H2/air atmosphere. By the means of confocal laser scanning microscopy, individual carbon fibers from the gas diffusion layer are identified to penetrate through the micro porous layer (MPL), likely causing a low electrical cell resistance in the range of 150 Ω cm2 through the thin sprayed membranes. By spraying a 200 nm graphene oxide/cerium oxide (GO/CeO2) interlayer between two layers of Aquivion ionomer, the impact of the electrical short is eliminated and the hydrogen crossover current density is reduced to about 1 mA/cm2. The peak power density of the interlayer-containing MEA drops only by 10% compared to a pure Aquivion membrane of similar thickness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Barbir · 2012
2. Direct deposition of proton exchange membranes enabling high performance hydrogen fuel cells10.1039/C5TA01341K ↗
3. Simple fabrication of 12 μm thin nanocomposite fuel cell membranes by direct electrospinning and printing10.1016/j.jpowsour.2016.10.094 ↗
4. Improved Pt-utilization efficiency of low Pt-loading PEM fuel cell electrodes using direct membrane deposition10.1016/j.elecom.2015.09.006 ↗
5. A completely spray-coated membrane electrode assembly10.1016/j.elecom.2016.06.017 ↗
6. Directly deposited Nafion/TiO2 composite membranes for high power medium temperature fuel cells10.1039/C5RA27462A ↗
7. 2009
8. Physically stable and high performance Aquivion/ePTFE composite membrane for high temperature fuel cell application10.1016/j.memsci.2013.04.014 ↗
9. New developments in proton conducting membranes for fuel cells10.1016/j.coche.2014.01.012 ↗
10. 2010
11. Characterization of a graphene oxide membrane fuel cell10.1016/j.jpowsour.2014.08.071 ↗
12. Orderly sandwich-shaped graphene oxide/Nafion composite membranes for direct methanol fuel cells10.1016/j.memsci.2015.05.049 ↗
13. Novel bilayer well-aligned Nafion/graphene oxide composite membranes prepared using spin coating method for direct liquid fuel cells10.1016/j.memsci.2015.07.007 ↗
14. Highly ordered graphene oxide paper laminated with a Nafion membrane for direct methanol fuel cells10.1016/j.jpowsour.2013.03.005 ↗
15. Johnathan Charles Frost, Henly on Thames, Jonathan David Brereton Sharman, Sonning Commen, Nadia Michele Permogorov, (Johnson Matthey Fuel Cells Limited), US Patent 2015/0180073 A1, 2013.
16. Cerium(III) as a stabilizer of perfluorinated membranes used in fuel cells: in situ detection of early events in the ESR resonator10.1021/ma9017108 ↗
17. The degradation mitigation effect of cerium oxide in polymer electrolyte membranes in extended fuel cell durability tests10.1016/j.jpowsour.2012.10.015 ↗
18. Towards fuel cell membranes with improved lifetime: Aquivion® Perfluorosulfonic acid membranes containing immobilized radical scavengers10.1016/j.jpowsour.2014.09.045 ↗
19. Cerium oxide decorated polymer nanofibers as effective membrane reinforcement for durable, high-performance fuel cells
20. Soft X-ray visualization of the liquid water transport within the cracks of micro porous layer in PEMFC10.1016/j.elecom.2011.03.033 ↗
21. Influence of cracks in the microporous layer on the water distribution in a PEM fuel cell investigated by synchrotron radiography10.1016/j.elecom.2013.04.006 ↗
22. Spray deposition of Nafion membranes: electrode-supported fuel cells10.1016/j.jpowsour.2016.07.059 ↗
23. Mench · 2012
24. 2011
25. Wang · 2012
26. The reasons for the high power density of fuel cells fabricated with directly deposited membranes10.1016/j.jpowsour.2016.06.132 ↗
27. A facile preparation method of surface patterned polymer electrolyte membranes for fuel cell applications10.1039/C4TA00674G ↗
28. Vertically aligned carbon nanotube electrodes for high current density operating proton exchange membrane fuel cells10.1016/j.jpowsour.2013.11.073 ↗
29. Properties of Nafion® NR-211 membranes for PEMFCs10.1016/j.memsci.2010.03.025 ↗
30. Alkaline anion exchange membranes based on KOH-treated multilayer graphene oxide10.1016/j.memsci.2016.02.017 ↗
31. Effects of gas diffusion layer structure on the open circuit voltage and hydrogen crossover of polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2011.05.088 ↗
32. New approaches towards novel composite and multilayer membranes for intermediate temperature-polymer electrolyte fuel cells and direct methanol fuel cells10.1016/j.jpowsour.2016.03.052 ↗