In-situ, non-destructive acoustic characterization of solid state electrolyte cells
Source abstract
Abstract
Abstract Solid-state electrolytes such as cubic Li6.25Al0.25La3Zr2O12 (LLZO) can enable solid-state batteries, metallic lithium anodes and higher voltage cathodes. However, the stability of cubic LLZO is affected by current density. In beta alumina solid electrolyte, microstructural failure was caused by Na dendrite penetration, and was shown to be a function of the fracture toughness, KIC. The relationship between dendrite penetration and KIC indicates electronic failure is related to creation of microstructural damage, and the microstructural damage may be used as an indicator of imminent electronic failure. To monitor microstructural damage during cycling, we developed a non-invasive, in-situ cell monitoring apparatus to help to correlate mechanical stability with Li-ion current density in LLZO. A pulse-echo transducer was integrated into all solid-state Li-LLZO-Li cells. The capability enables the characterization of microscopic inhomogeneities through the careful measurement of changes to the elastic moduli. The elastic moduli and fracture toughness have been previously reported for dense (>99%) specimens, but monitoring of the relative change in moduli during cycling has not been explored. In this study, an acoustic monitoring method is presented to monitor LLZO specimens during cycling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
2. The role of Al and Li concentration on the formation of cubic garnet solid electrolyte of nominal composition Li7La3Zr2O1210.1016/j.ssi.2011.10.022 ↗
3. Super-ionic conducting oxide electrolytes
4. Polymer electrolytes for lithium-ion batteries10.1002/(SICI)1521-4095(199804)10:6<439::AID-ADMA439>3.0.CO;2-I ↗
5. High lithium ionic conductivity in the garnet-type oxide Li7−X La3(Zr2−X, NbX)O12 (X=0–2)10.1016/j.jpowsour.2010.11.089 ↗
6. Characterizing the Li–Li7La3Zr2O12 interface stability and kinetics as a function of temperature and current density10.1016/j.jpowsour.2015.10.053 ↗
7. Direct observation of lithium dendrites inside garnet-type lithium-ion solid electrolyte10.1016/j.elecom.2015.05.001 ↗
8. Stability of Nb-doped cubic Li7La3Zr2O12 with lithium metal10.1149/2.036310jes ↗
9. A tale of two sites: on defining the carrier concentration in garnet-based ionic conductors for advanced Li batteries10.1002/aenm.201500096 ↗
10. The failure of beta-alumina electrolyte by a dendritic penetration mechanism10.1016/0013-4686(80)87067-8 ↗
11. On the deterioration of ß″-alumina ceramics under electrolytic conditions10.1007/PL00020062 ↗
12. Slow degradation and electron conduction in sodium/beta-aluminas10.1007/BF02402796 ↗
13. From order to disorder: the structure of lithium-conducting garnets Li7−xLa3TaxZr2−xO12 (x=0–2)10.1016/j.ssi.2011.10.023 ↗
14. Elastic properties of the solid electrolyte Li 7 La 3 Zr 2 O 12 (LLZO)
15. Room temperature elastic moduli and Vickers hardness of hot-pressed LLZO cubic garnet10.1007/s10853-012-6687-5 ↗
16. Fracture mode, microstructure and temperature-dependent elastic moduli for thermoelectric composites of PbTe–PbS with SiC nanoparticle additions10.1080/14786435.2013.833354 ↗
17. Thermal fatigue of cast and Hot-Pressed Lead-Antimony-Silver-Tellurium (LAST) thermoelectric materials10.1007/s11664-012-2254-8 ↗
18. Preparation and characterization of La2Li0.5Al0.5O4 with K2NiF4 structure10.1016/S0020-1693(00)81072-5 ↗
19. Electroceramics: characterization by impedance spectroscopy10.1002/adma.19900020304 ↗
20. Field assisted sintering of dense Al-substituted cubic phase Li7La3Zr2O12 solid electrolytes10.1016/j.jpowsour.2014.03.148 ↗
21. Structure and dynamics of the fast lithium ion conductor “Li7La3Zr2O12”10.1039/c1cp22108f ↗
22. The role of superimposed stresses on the degradation of solid electrolytes10.1007/BF01117365 ↗
23. A three-dimensional approach to the electrolytic degradation of solid electrolytes10.1007/BF00551990 ↗
24. Transparent cubic garnet-type solid electrolyte of Al2O3-doped Li7La3Zr2O1210.1016/j.ssi.2015.06.009 ↗
25. Nye · 1985
26. The effect of cracks in rocks on Poisson’s ratio10.1029/JZ070i020p05249 ↗
27. The effect of microcracking upon the Poisson’s ratio for brittle materials10.1007/BF02396943 ↗
28. The effect of indentation-induced microcracks on the elastic modulus of hydroxyapatite10.1007/s10853-012-6556-2 ↗
29. Rice · 1998
30. High-temperature elastic moduli of thermoelectric SnTe1±x – y SiC nanoparticulate composites10.1007/s10853-013-7637-6 ↗
31. The Elastic moduli of heterogeneous materials10.1115/1.3636446 ↗
32. Synthesis and characterization of Mg-AZ91/AlN composites10.1016/j.matdes.2012.02.001 ↗
33. Elaboration and characterization of a metal matrix composite: Al/AlN10.1016/S0955-2219(97)87873-9 ↗
34. Influence of silver nanoparticle addition, porosity, and processing technique on the mechanical properties of Ba0.3Co4Sb12 skutterudites10.1007/s10853-014-8427-5 ↗
35. Single-crystal elastic constants of lithium10.1016/0022-3697(59)90201-X ↗
36. Temperature dependence of the elastic constants of single crystal lithium10.1016/0022-3697(69)90386-2 ↗
37. The variation of the elastic constants of lithium with temperature and pressure10.1002/pssa.2210250118 ↗
38. The effect of surface-limited microcracks on the effective Young ’ s modulus of ceramics Part II Application of analysis to particular microcrack geometries10.1007/BF00595763 ↗
39. A numerical simulation for effective elastic moduli of plates with various distributions and sizes of cracks10.1016/j.ijsolstr.2004.02.016 ↗
40. The effect of micro-crack systems on the loss of stiffness of brittle solids10.1016/0020-7683(87)90104-1 ↗
41. Elastic moduli of a non · randomly cracked body10.1016/0020-7683(79)90018-0 ↗
42. Elastic moduli of a cracked solid10.1016/0020-7683(76)90044-5 ↗