Comprehensive characterization of all-solid-state thin films commercial microbatteries by Electrochemical Impedance Spectroscopy
Source abstract
Abstract
Abstract Constant miniaturization of electronic devices opens the way to the development of thin film microbatteries (TFB). For this type of devices, the use of an all-solid-state thin film technology has many advantages over conventional lithium cells. These microbatteries are thin, bendable and can be produced with a customizable shape for integration in microelectronic devices. Moreover, without liquid electrolyte, they are safer. With the aim to support the industrial production of these TFBs, adequate tools for understanding the electrochemical behavior of the complete microbattery and the identification of their possible failures that can occur have to be developed. In this context, the Electrochemical Impedance Spectroscopy seems to be a good compromise for cells characterization. Widely used for the characterization of liquid electrolyte-based batteries, this technique has been less applied to all solid state batteries, mainly because of the difficulty to work with a two-electrode system. There has been no comprehensive study deeply explaining the impedance evolution during the entire life of a microbattery. In this paper, physical characterizations of individual active materials and aging experiments have been performed in order to undoubtedly assign each EIS contributions, and to propose a more comprehensive electrical model for this family of commercial all-solid-state microbatteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Impedance spectroscopy at interfaces of metals and aqueous solutions – Surface roughness, CPE and related issues10.1016/j.ssi.2004.06.023 ↗
2. Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the application10.1016/j.apenergy.2012.09.030 ↗
3. Kinetic investigation of LiCoO2 by electrochemical impedance spectroscopy (EIS)10.1016/S1452-3981(23)15299-0 ↗
4. Impedance study of the Li degrees/electrolyte interface upon cycling10.1016/S0167-2738(00)00366-0 ↗
5. Electrical characterization of all-solid-state thin film batteries10.1016/j.jpowsour.2004.03.019 ↗
6. Thorough study of the local structure of LiPON thin films to better understand the influence of a solder-reflow type thermal treatment on their performances10.1016/j.ssi.2011.11.009 ↗
7. 2014
8. Charge∕discharge simulation of an all-solid-state thin-film battery using a one-dimensional model10.1149/2.041202jes ↗
9. A lithium phosphorous oxynitride (LiPON) film sputtered from unsintered Li3PO4 powder target10.1016/j.ssi.2011.04.001 ↗
10. Electrical properties of amorphous lithium electrolyte thin films10.1016/0167-2738(92)90442-R ↗
11. Fabrication and characterization of amorphous lithium electrolyte thin films and rechargeable thin-film batteries10.1016/0378-7753(93)80106-Y ↗
12. Fundamental questions relating to ion conduction in disordered solids10.1088/0034-4885/72/4/046501 ↗
13. Conductivity and ion dynamic studies in the Na4.7+xTi1.3–x(PO)4 (0≤x≤0.6) NASICON material10.1016/j.ssi.2004.12.013 ↗
14. Dielectric function of ionic conductors studied by impedance spectroscopy10.1016/j.ssi.2004.11.023 ↗
15. Charge transfer reaction at the lithium phosphorus oxynitride glass electrolyte/lithium cobalt oxide thin film interface10.1016/j.ssi.2005.02.025 ↗
16. Stabilizing lithium plating-stripping reaction between a lithium phosphorus oxynitride glass electrolyte and copper thin film by platinum insertion10.1016/j.jpowsour.2010.10.014 ↗
17. Electrochemical properties of an all-solid-state lithium-ion battery with an in-situ formed electrode material grown from a lithium conductive glass ceramics sheet10.1016/j.jpowsour.2013.05.006 ↗
18. Resistive switching phenomena in LixCoO2 thin films10.1002/adma.201101800 ↗
19. Direct observation of lithium-ion transport under an electrical field in LixCoO2 nanograins10.1038/srep01084 ↗
20. Impact of lithium composition on the thermoelectric properties of the layered cobalt oxide system LixCoO2
21. Solid-state chemistry of lithium power sources†10.1039/a608551b ↗
22. Reduction of charge transfer resistance at the lithium phosphorus oxynitride/lithium cobalt oxide interface by thermal treatment10.1016/j.jpowsour.2005.03.073 ↗
23. One step synthesis of lamellar R-3m LiCoO2 thin films by an electrochemical-hydrothermal method10.1016/j.electacta.2011.06.083 ↗
24. Determination of kinetic and thermodynamic parameters of mixed-conducting electrodes, and application to system Li-Sb10.1149/1.2133112 ↗
25. Interface reactions between LiPON and lithium studied by in-situ X-ray photoemission10.1016/j.ssi.2014.10.017 ↗
26. Self-discharge study of LiCoO2 cathode materials10.1016/S0378-7753(03)00227-1 ↗
27. The thermodynamic and thermoelectric properties of LixTiS2 and LixCoO210.1016/0167-2738(84)90100-0 ↗
28. The reaction of charged cathodes with nonaqueous solvents and electrolytes: I. Li0.5CoO210.1149/1.1407245 ↗