journal article·2016-01

Alkaline direct ethanol fuel cell performance using alkali-impregnated polyvinyl alcohol/functionalized carbon nano-tube solid electrolytes

Chien-Yi Huang, Jia-Shiun Lin, Wen-Han Pan, Chao-Ming Shih, Ying-Ling Liu, Shingjiang Jessie Lue

Publisher page

Abstract

Abstract This study investigates the application of a polyvinyl alcohol (PVA)/functionalized carbon nano-tubes (m-CNTs) composite in alkaline direct ethanol fuel cells (ADEFC). The m-CNTs are functionalized with PVA using the ozone mediation method, and the PVA composite containing the modified CNTs is prepared. Adding m-CNT into the PVA matrix enhances the alkaline uptake and the ionic conductivity of the KOH-doped electrolyte. Meanwhile, the m-CNT-containing membrane exhibited a lower swelling ratio and suppressed ethanol permeability compared to the pristine PVA film. The optimal condition for the ADEFC is determined to be under operation at an anode feed of 3 M ethanol in a 5 M KOH solution (at a flow rate of 5 cm3 min−1) with a cathode feed of moisturized oxygen (with a flow rate of 100 cm3 min−1) and the KOH-doped PVA/m-CNT electrolyte. We achieved a peak power density value of 65 mW cm−2 at 60 °C, which is the highest among the ADEFC literature data and several times higher than the proton-exchange direct ethanol fuel cells using sulfonated membrane electrolytes. Therefore, the KOH-doped PVA/m-CNT electrolyte is a suitable solid electrolyte for ADEFCs and has potential for commercialization in alkaline fuel cell applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced battery technologies research · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Performance of alkaline electrolyte-membrane-based direct ethanol fuel cells10.1016/j.jpowsour.2008.10.132 ↗
2. Anion-exchange membrane direct ethanol fuel cells: Status and perspective10.1007/s11708-010-0127-5 ↗
3. A flow field enabling operating direct methanol fuel cells with highly concentrated methanol10.1016/j.ijhydene.2010.09.026 ↗
4. Review: direct ethanol fuel cells10.1016/j.ijhydene.2012.07.059 ↗
5. Dihydrogenimidazole modified silica-sulfonated poly(ether ketone) hybrid materials as electrolyte membranes for direct ethanol fuel cells10.1016/j.mseb.2011.02.029 ↗
6. Investigations into the ex situ methanol, ethanol and ethylene glycol permeabilities of alkaline polymer electrolyte membranes10.1016/j.jpowsour.2007.04.068 ↗
7. Study of poly(vinyl alcohol)/titanium oxide composite polymer membranes and their application on alkaline direct alcohol fuel cell10.1016/j.jpowsour.2008.06.011 ↗
8. Direct ethanol PEM fuel cells: the case of platinum based anodes10.1016/j.ijhydene.2004.11.006 ↗
9. An alkaline direct ethanol fuel cell with a cation exchange membrane10.1039/c1ee00002k ↗
10. Prospects for alkaline anion-exchange membranes in low temperature fuel cells10.1002/fuce.200400045 ↗
11. A novel direct ethanol fuel cell with high power density10.1016/j.jpowsour.2011.03.040 ↗
12. Alkaline direct oxidation fuel cell with non-platinum catalysts capable of converting glucose to electricity at high power output10.1016/j.jpowsour.2010.05.069 ↗
13. Performance of an alkaline-acid direct ethanol fuel cell10.1016/j.ijhydene.2011.04.150 ↗
14. Synthesis of PdNi catalysts for the oxidation of ethanol in alkaline direct ethanol fuel cells10.1016/j.jpowsour.2009.08.079 ↗
15. MEA for alkaline direct ethanol fuel cell with alkali doped PBI membrane and non-platinum electrodes10.1016/j.jpowsour.2008.11.118 ↗
16. Principles and materials aspects of direct alkaline alcohol fuel cells10.3390/en3081499 ↗
17. Alkaline direct alcohol fuel cells10.1016/j.jpowsour.2009.11.145 ↗
18. Deactivation of palladium electrocatalysts for alcohols oxidation in basic electrolytes10.1016/j.electacta.2015.02.026 ↗
19. Performance degradation of direct formic acid fuel cell incorporating a Pd anode catalyst10.1016/j.jpowsour.2009.11.085 ↗
20. Poisoning and regeneration of Pd catalyst in direct formic acid fuel cell10.1016/j.electacta.2010.04.014 ↗
21. Direct ethanol fuel cells using an anion exchange membrane10.1016/j.jpowsour.2008.09.024 ↗
22. Novel quaternized polyvinyl alcohol/quaternized chitosan nano-composite as an effective hydroxide-conducting electrolyte10.1016/j.memsci.2015.02.043 ↗
23. Diffusivity enhancement of water vapor in poly(vinyl alcohol)-fumed silica nano-composite membranes: correlation with polymer crystallinity and free-volume properties10.1016/j.memsci.2008.09.015 ↗
24. Alkali doped polybenzimidazole membrane for high performance alkaline direct ethanol fuel cell10.1016/j.jpowsour.2008.04.010 ↗
25. Preparation of the PVA/HAP composite polymer membrane for alkaline DMFC application10.1016/j.desal.2007.09.036 ↗
26. Direct methanol fuel cell (DMFC) based on PVA/MMT composite polymer membranes10.1016/j.jpowsour.2008.11.098 ↗
27. Permeant transport properties and cell performance of potassium hydroxide doped poly(vinyl alcohol)/fumed silica nano-composites10.1016/j.memsci.2010.11.009 ↗
28. Polytetrafluoroethylene (PTFE)/silane cross-linked sulfonated poly(styrene–ethylene/butylene–styrene) (sSEBS) composite membrane for direct alcohol and formic acid fuel cells10.1016/j.memsci.2014.03.076 ↗
29. Synthesis and characterization of crosslinked poly (vinyl alcohol)/layered double hydroxide composite polymer membranes for alkaline direct ethanol fuel cells10.1016/j.ijhydene.2012.09.089 ↗
30. Poly (vinyl alcohol)/3-(trimethylammonium) propyl-functionalized silica hybrid membranes for alkaline direct ethanol fuel cells10.1016/j.ijhydene.2009.12.179 ↗
31. KOH modified Nafion112 membrane for high performance alkaline direct ethanol fuel cell10.1016/j.ijhydene.2010.12.093 ↗
32. Beneficial effect of carbon nanotubes on the performances of Nafion membranes in fuel cell applications10.1016/j.memsci.2007.07.019 ↗
33. Functionalized carbon nanotube-poly(arylene sulfone) composite membranes for direct methanol fuel cells with enhanced performance10.1016/j.jpowsour.2008.02.014 ↗
34. Preparation and properties of chitosan/carbon nanotube nanocomposites using poly(styrene sulfonic acid)-modified CNTs10.1016/j.carbpol.2008.10.021 ↗
35. Preparation and applications of nafion-functionalized multiwalled carbon nanotubes for proton exchange membrane fuel cells10.1039/c000099j ↗
36. Electrical conductivity enhancement of polymer/multiwalled carbon nanotube (MWCNT) composites by thermally-induced defunctionalization of MWCNTs10.1021/am200558f ↗
37. High-performance direct methanol alkaline fuel cell performance using potassium hydroxide-impregnated polyvinyl alcohol/carbon nano-tube electrolytes10.1016/j.jpowsour.2011.10.091 ↗
38. Functionalization of multi-walled carbon nanotubes with non-reactive polymers through an ozone-mediated process for the preparation of a wide range of high performance polymer/carbon nanotube composites10.1016/j.carbon.2009.12.002 ↗
39. Alkali doped polyvinyl alcohol/multi-walled carbon nano-tube electrolyte for direct methanol alkaline fuel cell10.1016/j.memsci.2011.04.026 ↗
40. Direct borohydride fuel cell performance using hydroxide-conducting polymeric nano-composite electrolytes10.1002/polb.23250 ↗
41. Crystallinity and stability of poly(vinyl alcohol)-fumed silica mixed matrix membranes
42. Bondi · 1968
43. Correlation between free-volume properties and pervaporative flux of polyurethane-zeolite composites on organic solvent mixtures10.1021/jp111116c ↗
44. Permeation of xylene isomers through supported liquid membranes containing cyclodextrins10.1081/SS-120000799 ↗
45. Plasma modification on a Nafion membrane for direct methanol fuel cell applications10.1007/BF02706747 ↗
46. Pervaporative separation of azeotropic methanol/toluene mixtures in polyurethane-poly(dimethylsiloxane) (PU-PDMS) blend membranes: Correlation with sorption and diffusion behaviors in a binary solution system10.1016/j.memsci.2009.10.012 ↗
47. Water states in perfluorosulfonic acid membranes using differential scanning calorimetry10.1080/00222340802561649 ↗
48. Diffusion of multicomponent vapors in a poly(dimethyl siloxane) membrane10.1016/j.desal.2007.09.052 ↗
49. Enhanced performance of a direct methanol alkaline fuel cell (DMAFC) using a polyvinyl alcohol/fumed silica/KOH electrolyte10.1016/j.jpowsour.2010.06.049 ↗
50. Synthesis and characterization of sulfonated poly(phthalazinone ether ketone) for proton exchange membrane materials10.1002/pola.10601 ↗
51. Thermally stable polybenzimidazole/carbon nano-tube composites for alkaline direct methanol fuel cell applications10.1016/j.jpowsour.2013.05.171 ↗
52. Alkali doped poly(vinyl alcohol) for potential fuel cell applications10.1016/j.synthmet.2009.11.013 ↗
53. Reid · 1987
54. Flow dynamic characteristics in flow field of proton exchange membrane fuel cells
55. Study on water transport in PEM of a direct methanol fuel cell10.1016/j.jpowsour.2006.12.036 ↗
56. Novel polyvinyl alcohol nanocomposites containing carbon nano-tubes with Fe3O4 pendants for alkaline fuel cell application10.1016/j.memsci.2013.05.001 ↗
57. Preparation and properties of nanocomposite membranes of polybenzimidazole/sulfonated silica nanoparticles for proton exchange membranes10.1016/j.memsci.2009.01.045 ↗
58. A study on the structure of anodes for the direct methanol air fuel cells
59. A study of the anodic oxidation of methanol on Pt in alkaline solutions10.1016/S0022-0728(03)00172-4 ↗
60. Direct ethanol fuel cell (DEFC): Electrical performances and reaction productions distribution under operating conditions with different platinum-based anodes10.1016/j.jpowsour.2005.08.027 ↗
61. Rescent progress in direct ethanol proton exchange membrane fuel cell (DE-PEMFCs)10.1016/j.apcatb.2005.09.018 ↗
62. Preparation of PtRu/C electrocalysts using cirtic acide as reducing agent and OH- ions as stabilizing agent for direct alcohol fuel cell (DAFC)10.1016/S1452-3981(23)15198-4 ↗
63. Modified SPEEK membranes for direct ethanol fuel cell10.1016/j.jpowsour.2010.01.005 ↗
64. Ethanol crossover phenomena and its influence on the performance of DEFC10.1016/j.jpowsour.2004.12.065 ↗