journal article·2011-06

Manufacturing process assumptions used in fuel cell system cost analyses

Jason Marcinkoski, Brian D. James, Jeff A. Kalinoski, Walt Podolski, Thomas Benjamin, John Kopasz

Journal of Power Sources· Volume 196· Issue 12
Publisher page

Abstract

This paper is a summary of the manufacturing processes used in recent automotive fuel cell system cost analyses funded by the U.S. Department of Energy (DOE). Through these analyses, DOE examines the projected cost of an 80-kW polymer-electrolyte fuel cell system manufactured at a rate of 500,000 systems per year. Directed Technologies Inc. (DTI) and TIAX LLC (TIAX) have been contracted independently to perform such analysis since 2006, and both have prior experience. This paper addresses the most recent fuel cell configurations envisioned by DTI and TIAX. DTI has recently presented their 2010 analysis results and TIAX has recently presented their 2009 results with preliminary 2010 results. Since these presentations do not document in full, the underlying details and assumptions, DTI and TIAX's most recent comprehensive written reports are used for the present discussion. DTI's most recent report detailed 2009 technology, and TIAX's most recent report detailed 2008 technology. The summary of manufacturing process assumptions is meant to impart a sense of the rigor of the cost analyses funded by the DOE, and to provide the reader with an overview of the manufacturing processes used for fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. B.D. James, J.A. Kalinoski, K.N. Baum, Presented at the 2010 DOE Fuel Cell Technologies Program Annual Merit Review and Peer Evaluation Meeting, Directed Technologies Inc., Washington, DC, 9 June 2010.
2. J. Sinha, Y. Yang, Presented at the 2010 DOE Fuel Cell Technologies Program Annual Merit Review and Peer Evaluation Meeting, TIAX LLC, Washington, DC, 9 June 2010.
3. B.D. James, J.A. Kalinoski, K.N. Baum, Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications: 2010 Update, Directed Technologies Inc., 30 september 2010, Prepared for the U.S. Department of Energy, Energy Efficiency and Renewable Energy Office, Hydrogen, Fuel Cells & Infrastructure Technologies Program under contract No. GS-10F-0099J.10.2172/1218889 ↗
4. J. Sinha, Y. Yang, S. Lasher, P. Kopf, Manufacturing cost analysis of direct hydrogen PEM fuel cell systems for automotive applications: 2008 Update, TIAX Report to US DOE, November 9, 2009.
5. R.K. Ahluwalia, X. Wang, K. Tajiri, R. Kumar, Presented at the 2009 DOE Fuel Cell Technologies Program Annual Merit Review and Peer Evaluation Meeting, Argonne National Laboratory, Arlington, VA, 21 May 2009.
6. E.J. Carlson, et al., Cost analysis of PEM fuel cell systems for transportation, NREL/SR-560-39104, December 2005.10.2172/862302 ↗
7. J. Sinha, S. Lasher, Y. Yang, Presented at the 2009 DOE Fuel Cell Technologies Program Annual Merit Review and Peer Evaluation Meeting, 21 May 2009, Arlington, VA.
8. E.J. Carlson, et al., Cost analysis of PEM fuel cell systems for transportation, NREL/SR-560-39104, September 30, 2005.10.2172/862302 ↗
9. Matthias · Am. Chem. Soc. Preprints Div. Fuel Chem. · 2004 · 49 · 471
10. D.E. Curtin, High-Volume, Low-Cost Manufacturing Process for Nafion Membranes, 2002 Fuel Cell Seminar, Palm Springs, November 2002.