Cast and 3D printed ion exchange membranes for monolithic microbial fuel cell fabrication
Source abstract
Abstract
We present novel solutions to a key challenge in microbial fuel cell (MFC) technology; greater power density through increased relative surface area of the ion exchange membrane that separates the anode and cathode electrodes. The first use of a 3D printed polymer and a cast latex membrane are compared to a conventionally used cation exchange membrane. These new techniques significantly expand the geometric versatility available to ion exchange membranes in MFCs, which may be instrumental in answering challenges in the design of MFCs including miniaturisation, cost and ease of fabrication. Under electrical load conditions selected for optimal power transfer, peak power production (mean 10 batch feeds) was 11.39 μW (CEM), 10.51 μW (latex) and 0.92 μW (Tangoplus). Change in conductivity and pH of anolyte were correlated with MFC power production. Digital and environmental scanning electron microscopy show structural changes to and biological precipitation on membrane materials following long term use in an MFC. The cost of the novel membranes was lower than the conventional CEM. The efficacy of two novel membranes for ion exchange indicates that further characterisation of these materials and their fabrication techniques, shows great potential to significantly increase the range and type of MFCs that can be produced.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. John P. Hurley, Lansing M. Prescott, Donald A. Klein. Microbiology. Wm. C. Brown Publishers, Dubuque, 3rd edition, ISBN: 0-697-29390-4.
2. Microbial fuel cells based on carbon veil electrodes : Stack configuration and scalability10.1002/er.1419 ↗
3. Scalable tubular membrane cathodes for microbial fuel cell applications
4. Effect of organic loading rates and proton exchange membrane surface area on the performance of an up-flow cylindrical microbial fuel cell
5. A state of the art review on microbial fuel cells: A promising technology for wastewater treatment and bioenergy10.1016/j.biotechadv.2007.05.004 ↗
6. Proton exchange membrane and electrode surface areas as factors that affect power generation in microbial fuel cells10.1007/s00253-005-0066-y ↗
7. Biodegradation and proton exchange using natural rubber in microbial fuel cells10.1007/s10532-013-9621-x ↗
8. The power of glove : Soft microbial fuel cell for low-power electronics10.1016/j.jpowsour.2013.10.096 ↗
9. Performance evaluation of low cost microbial fuel cell fabricated using earthen pot with biotic and abiotic cathode10.1016/j.biortech.2009.07.089 ↗
10. Effect of membrane thickness on the performance and efficiency of passive direct methanol fuel cells10.1016/j.jpowsour.2005.03.190 ↗
11. Ionic polymerconductor composites as biomimetic sensors, robotic actuators and artificial musclesa review10.1016/S0013-4686(03)00224-X ↗
12. Printing 3D dielectric elastomer actuators for soft robotics
13. Small scale microbial fuel cells and different ways of reporting output I. A. Ieropoulos
14. Three dimensional (3D) printed electrodes for interdigitated supercapacitors10.1016/j.elecom.2014.01.013 ↗
15. Biodegradation and proton exchange using natural rubber in microbial fuel cells10.1007/s10532-013-9621-x ↗
16. Investigating the effects of fluidic connection between microbial fuel cells10.1007/s00449-010-0491-x ↗
17. Fouling of proton exchange membrane (PEM) deteriorates the performance of microbial fuel cell10.1016/j.watres.2011.12.060 ↗