Sulphonated imidized graphene oxide (SIGO) based polymer electrolyte membrane for improved water retention, stability and proton conductivity
Source abstract
Abstract
Abstract Sulphonated imidized graphene oxide (SIGO) (graphene oxide (GO) tethered sulphonated polyimide) has been successfully synthesized by polycondensation reaction using dianhydride and sulphonated diamine. Polymer electrolyte membranes (PEMs) are prepared by using SIGO (different wt%) and sulphonated poly(imide) (SPI). Resultant SPI/SIGO composite PEMs exhibit improved stabilities (thermal, mechanical and oxidative) and good water-retention properties (high bound water content responsible for proton conduction at high temperature by internal self-humidification). Incorporation of covalent bonded SIGO into SPI matrix results hydrophobic−hydrophilic phase separation and facile architecture of proton conducting path. Well optimized sulphonated poly(imide)/sulphonated imidized graphene oxide (15 wt%) (SPI/SIGO-15) composite membrane shows 2.24 meq g−1 ion-exchange capacity (IEC); 11.38 × 10−2 S cm−1 proton conductivity; 5.12% bound water content; and 10.52 × 10−7 cm2 s−1 methanol permeability. Maximum power density for pristine SPI membrane (57.12 mW cm−2) improves to 78.53 mW cm−2 for SPI/SIGO-15 membrane, in single-cell direct methanol fuel cell (DMFC) test at 70 °C using 2 M methanol fuel. Under similar experimental conditions, Nafion 117 membrane exhibits 62.40 mW cm−2 maximum power density. Reported strategy for the preparation of PEMs, offers a useful protocol for grafting of functionalized inorganic materials with in organic polymer chain by imidization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Graphene-based materials for energy conversion10.1002/adma.201104971 ↗
2. Graphene-based materials for hydrogen generation from light-driven water splitting10.1002/adma.201301207 ↗
3. Sulfonated polyimide/acid-functionalized graphene oxide composite polymer electrolyte membranes with improved proton conductivity and water-retention properties10.1021/am504597a ↗
4. Sulphonated poly(ether ether ketone) membranes for direct methanol fuel cell10.1016/j.memsci.2003.08.018 ↗
5. Sulfonated graphene oxide–silica for highly selective Nafion-based proton exchange membranes10.1039/C4TA03207A ↗
6. Thermally crosslinked sulfonated polyethersulfone proton exchange membranes for direct methanol fuel cells
7. Lee · 2015 · vol. 282 · 211
8. Highly fluorinated sulfonated poly(arylene ether sulfone) copolymers: synthesis and evaluation of proton exchange membrane properties10.1021/ie303380a ↗
9. enhanced proton conductivity of nafion hybrid membrane under different humidities by incorporating metal−organic frameworks with high phytic acid loading10.1021/am502236v ↗
10. Sulfonated poly(arylene ether sulfone ketone) multiblock copolymers with highly sulfonated block. Synthesis and properties10.1021/ma100291z ↗
11. Synthesis of sulfonic acid-contianing polybenzoxazine for proton exchange membrane in direct methanol fuel cells10.1021/ma4020214 ↗
12. alternative polymer systems for proton exchange membranes (PEMs)10.1021/cr020711a ↗
13. Modified SPEEK membranes for direct ethanol fuel cell10.1016/j.jpowsour.2010.01.005 ↗
14. Locally sulfonated poly(ether sulfone)s with highly sulphonated units as proton exchange membrane10.1002/pola.23403 ↗
15. Fluorene-containing cardo polymers as ion conductive membranes for fuel cells10.1039/c1py00103e ↗
16. Broadband electric spectroscopy of proton conducting SPEEK membranes10.1016/j.memsci.2011.10.049 ↗
17. Novel cardo poly(arylene ether sulfone)s with pendant sulfonated aliphatic side chains for proton exchange membranes10.1016/j.memsci.2011.01.039 ↗
18. Facile in situ template synthesis of sulfonated polyimide/mesoporous silica hybrid proton exchange membrane for direct methanol fuel cells10.1016/j.micromeso.2011.07.010 ↗
19. Proton conductive polyimide electrolytes containing trifluoromethyl groups: synthesis, properties, and DMFC performance10.1021/ma049547e ↗
20. Water resistant sulphonated polyimides based on 4,4′-binaphthyl-1,1′,8,8′-tetracarboxylic dianhydride (BNTDA) for proton exchange membranes10.1016/j.polymer.2007.07.026 ↗
21. Hydrolytically stable polyimide ionomer for fuel cell applications10.1021/cm049550c ↗
22. On the development of naphthalene-based sulfonated polyimide membranes for fuel cell applications10.1295/polymj.38.197 ↗
23. Aliphatic-aromatic sulphonated polyimide and acid functionalized polysilsesquioxane composite membranes for fuel cell applications10.1039/c3ta12755a ↗
24. A facile approach for the preparation of cross-linked sulfonated polyimide membranes for fuel cell application10.1039/B613561G ↗
25. Influence of the water content on the diffusion coefficients of Li+ and water across naphthalenic based copolyimide cation-exchange membranes10.1021/jp3065322 ↗
26. Hydrolytic degradation of sulphonated polyimide membranes for fuel cells10.1016/j.memsci.2011.05.063 ↗
27. Synthesis water stability and proton conductivity of novel sulfonated polyimides from 4,4′-bis(4-aminophenoxy)biphenyl-3,3′-disulfonic acid10.1016/j.memsci.2003.10.037 ↗
28. Ozonated graphene oxide film as a proton-exchange membrane10.1002/anie.201310908 ↗
29. Enhanced water retention by using polymeric microcapsules to confer high proton conductivity on membranes at low humidity10.1002/adfm.201001793 ↗
30. Sulphonated polyimide proton exchange membranes with graphene oxide show improved proton conductivity, methanol crossover impedance, and mechanical properties10.1002/aenm.201100366 ↗
31. Graphite oxide/nafion composite membranes for polymer electrolyte fuel cells10.1039/c2ra20225e ↗
32. Enhanced performance of the sulphonated polyimide proton exchange membranes by graphene oxide: size effect of graphene oxide10.1016/j.memsci.2014.01.017 ↗
33. Sulphonated poly(ether ether ketone) membranes with sulphonated graphene oxide fillers for direct methanol fuel cells10.1016/j.ijhydene.2013.02.129 ↗
34. Composite membranes based on sulphonated poly(ether ether ketone) and SDBS-adsorbed graphene oxide for direct methanol fuel cells10.1039/c2jm35571j ↗
35. Innovative polymer nanocomposite electrolytes: nanoscale manipulation of ion channels by functionalized graphenes10.1021/nn2013113 ↗
36. Polydopamine-modified graphene oxide nanocomposite membrane for proton exchange membrane fuel cell under anhydrous conditions10.1039/c3ta15301k ↗
37. Novel acid-base hybrid membrane based on amine-functionalized reduced graphene oxide and sulfonated polyimide for vanadium redox flow battery10.1016/j.electacta.2015.01.159 ↗
38. Preparation, mechanical and thermal properties of functionalized graphene/polyimide nanocomposites10.1016/j.compositesa.2012.03.026 ↗
39. Graphene polyimide nanocomposites; thermal, mechanical, and high-temperature shape memory effects10.1021/nn302871y ↗
40. Polyimide-side-chain tethered polyhedral oligomeric silsesquioxane nanocomposites for low-dielectric film applications10.1021/cm030393b ↗
41. Synthesis and characterization of organosoluble aromatic polyimides containing POSS in main chain derived from double-decker-shaped silsesquioxane10.1021/ma7027227 ↗
42. Nanocomposites derived from a low-color aromatic polyimide (CP2) and amine-functionalized vapor-grown carbon nanofibers: in situ polymerization and characterization10.1021/ma070157c ↗
43. Graphene oxide nanosheet with high proton conductivity10.1021/ja401060q ↗
44. N-o-sulphonic acid benzyl chitosan (NSBC) and N,N-dimethylene phosphonic acid propylsilane graphene oxide (NMPSGO) based multi-functional polymer electrolyte membrane with enhanced water retention and conductivity10.1039/C4RA09581B ↗