journal article·2019-07

Microstructural feature analysis of commercial Li-ion battery cathodes by focused ion beam tomography

L. Almar, J. Joos, A. Weber, E. Ivers-Tiffée

Publisher page

Abstract

Abstract Four positive electrodes are extracted from two high-power and two high-energy Li-ion battery consumer cells, and then analyzed by focused ion beam-scanning electron microscopy (FIB-SEM) tomography. The active material phase, carbon black-binder phase and pore phase are quantitatively evaluated using adequate 3D analysis techniques by their volume fractions, surface areas, particle size distributions and tortuosities. The active material phase is composed of LiCoO2 (Sanyo 1500 mA h), or LiNiCoAlO2 (Sony 2600 mA h) or one of two LiNiCoAlO2-LiCoO2 blends (Kokam high-power 350 mA h and high-energy 560 mA h). Special emphasis was put on the three-dimensional distribution of the submicron-sized (yet highly agglomerated) carbon black-binder phase. Vacuum infiltration with a two-component silicone resin gave greyscale contrast between the carbon black-binder and pore phases for contour description at voxel sizes from 30 to 50 nm. This study elucidates the cathode microstructural features for high-energy and high-power application and provides a complete parameter set of commercial electrodes with differing chemical composition. This information can be used by the scientific community as input parameters in simulations and models, filling the gap between the experimental and the simulation fields.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Electron and X-Ray Spectroscopy Techniques · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
3. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
4. Multi length scale microstructural investigations of a commercially available Li-ion battery electrode10.1149/2.053207jes ↗
5. Theoretical analysis of current distribution in porous electrodes10.1149/1.2425269 ↗
6. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
7. Comparison of three-dimensional analysis and stereological techniques for quantifying lithium-ion battery electrode microstructures10.1111/jmi.12389 ↗
8. Three-phase multiscale modeling of a LiCoO2 cathode: combining the advantages of FIB-SEM imaging and X-ray tomography10.1002/aenm.201401612 ↗
9. Multi-scale correlative tomography of a Li-ion battery composite cathode10.1038/srep30109 ↗
10. Multiscale morphological characterization of process induced heterogeneities in blended positive electrodes for lithium–ion batteries10.1007/s10853-016-0374-x ↗
11. Multiscale morphological and electrical characterization of charge transport limitations to the power performance of positive electrode blends for lithium-ion batteries10.1002/aenm.201602239 ↗
12. Three-dimensional microstructural characterization using focused ion beam tomography10.1557/mrs2007.64 ↗
13. Three-dimensional reconstruction of a solid-oxide fuel-cell anode10.1038/nmat1668 ↗
14. 4D nano-tomography of electrochemical energy devices using lab-based X-ray imaging10.1016/j.nanoen.2018.03.001 ↗
15. Representative volume element size for accurate solid oxide fuel cell cathode reconstructions from focused ion beam tomography data10.1016/j.electacta.2012.04.133 ↗
16. Measurement of three-dimensional microstructure in a LiCoO2 positive electrode10.1016/j.jpowsour.2010.04.066 ↗
17. Three-dimensional reconstruction of a LiCoO2 Li-ion battery cathode10.1149/2.002203esl ↗
18. FIB/SEM-based calculation of tortuosity in a porous LiCoO2 cathode for a Li-ion battery10.1016/j.elecom.2012.11.006 ↗
19. Three-dimensional electrochemical Li-ion battery modelling featuring a focused ion-beam/scanning electron microscopy based three-phase reconstruction of a LiCoO2 cathode10.1016/j.electacta.2013.10.103 ↗
20. Three-dimensional morphological measurements of LiCoO2 and LiCoO2/Li(Ni1/3Mn1/3Co1/3)O2 lithium-ion battery cathodes10.1016/j.jpowsour.2012.11.043 ↗
21. Effects of three-dimensional cathode microstructure on the performance of lithium-ion battery cathodes10.1016/j.electacta.2012.10.104 ↗
22. A computational model of the mechanical behavior within reconstructed LixCoO2 Li-ion battery cathode particles10.1016/j.electacta.2014.03.113 ↗
23. Three-phase 3D reconstruction of a LiCoO2 cathode via FIB-SEM tomography10.1017/S1431927615015640 ↗
24. Mechanical and electrochemical response of a LiCoO2 cathode using reconstructed microstructures10.1016/j.electacta.2015.12.224 ↗
25. Numerical and experimental evaluation of the relationship between porous electrode structure and effective conductivity of ions and electrons in lithium-ion batteries10.1016/j.jpowsour.2016.12.098 ↗
26. Three-dimensional reconstruction of a composite cathode for lithium-ion cells10.1016/j.elecom.2010.12.004 ↗
27. Quantitative characterization of LiFePO4 cathodes reconstructed by FIB/SEM tomography10.1149/2.033207jes ↗
28. Low-voltage FIB/SEM tomography for 3D microstructure evolution of LiFePO4/C electrode10.1149/06918.0071ecst ↗
29. Electron microscopy investigations of changes in morphology and conductivity of LiFePO4/C electrodes10.1016/j.jpowsour.2015.12.119 ↗
30. Relating the 3D electrode morphology to Li-ion battery performance; a case for LiFePO410.1016/j.jpowsour.2016.05.097 ↗
31. Enhanced imaging of lithium ion battery electrode materials10.1149/2.0061701jes ↗
32. Three-dimensional investigation of cycling-induced microstructural changes in lithium-ion battery cathodes using focused ion beam/scanning electron microscopy10.1016/j.jpowsour.2015.11.108 ↗
33. Nano-structural changes in Li-ion battery cathodes during cycling revealed by FIB-SEM serial sectioning tomography10.1039/C5TA04151A ↗
34. New method for binder and carbon black detection at nanometer scale in carbon electrodes for lithium ion batteries10.1016/j.jpowsour.2017.07.102 ↗
35. Influence of carbon black distribution on performance of oxide cathodes for Li ion batteries10.1016/S0013-4686(03)00522-X ↗
36. The role of carbon black distribution in cathodes for Li ion batteries10.1016/S0378-7753(03)00250-7 ↗
37. Quantification and modeling of mechanical degradation in lithium-ion batteries based on nanoscale imaging Müller and Pietsch et al
38. X-ray tomography for lithium ion battery Research: a practical guide10.1146/annurev-matsci-070616-123957 ↗
39. Determining the uncertainty in microstructural parameters extracted from tomographic data10.1039/C7SE00498B ↗
40. Characterization of the 3-dimensional microstructure of a graphite negative electrode from a Li-ion battery10.1016/j.elecom.2009.12.038 ↗
41. Anode microstructures from high-energy and high-power lithium-ion cylindrical cells obtained by X-ray nano-tomography10.1016/j.jpowsour.2014.07.070 ↗
42. Multi-scale 3D investigations of a commercial 18650 Li-ion battery with correlative electron- and X-ray microscopy10.1016/j.jpowsour.2017.04.102 ↗
43. Quantification of double-layer Ni/YSZ fuel cell anodes from focused ion beam tomography data10.1016/j.jpowsour.2013.08.021 ↗
44. Detailed microstructure analysis and 3D simulations of porous electrodes10.1149/1.3570232 ↗
45. W.S. Rasband, ImageJ, https://imagej.nih.gov/ij/, 1997-2018.
46. Reconstruction of porous electrodes by FIB/SEM for detailed microstructure modeling10.1016/j.jpowsour.2010.10.006 ↗
47. Marching cubes: a high resolution 3D surface construction algorithm10.1145/37402.37422 ↗
48. Tortuosity in electrochemical devices: a review of calculation approaches10.1080/09506608.2016.1249995 ↗
49. On the origin and application of the Bruggeman correlation for analysing transport phenomena in electrochemical systems10.1016/j.coche.2016.02.006 ↗
50. Math2Market