journal article·2017-02

An extended polarization model to study the influence of current collector geometry of large-format lithium-ion pouch cells

Stephan Kosch, Alexander Rheinfeld, Simon V. Erhard, Andreas Jossen

Publisher page

Abstract

Abstract In this work, depth-of-discharge and temperature distribution of a large-format lithium-ion pouch cell are examined by means of a two-dimensional electro-thermal polarization model. A method of improving the dynamic behavior of the model while maintaining its accuracy under constant current loads by applying intermittent charge and discharge data is given. The model is validated with the aid of experimental data gained from dynamic and constant current discharge profiles applied to a commercial 40 Ah Li-ion pouch cell. Two major design studies are carried out focusing on a variation of geometrical parameters, namely the size and the positioning of the cell tabs. For each design, the influence of current collector thickness on the uniformity of the temperature and depth-of-discharge distribution is investigated during a 4C constant current discharge operation. Simulation results show that reducing the current collector thickness results in a moderate increase of 3 °C in maximum temperature and 1.5% in depth-of-discharge imbalance if the tab size is increased. In consequence, lowering the share of inactive components within a lithium-ion cell by optimizing the thickness of the current collector foils should be further considered to enhance the performance of typical lithium-ion cell designs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced DC-DC Converters

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. A two-dimensional modeling of a lithium-polymer battery10.1016/j.jpowsour.2006.03.012 ↗
2. Multi-domain modeling of lithium-ion batteries encompassing multi-physics in varied length scales10.1149/1.3597614 ↗
3. A pseudo three-dimensional electrochemical-thermal model of a prismatic LiFePO4 battery during discharge process10.1016/j.energy.2014.11.073 ↗
4. Review of simplified pseudo-two-dimensional models of lithium-ion batteries10.1016/j.jpowsour.2016.07.036 ↗
5. A three-dimensional multi-physics model for a Li-ion battery10.1016/j.jpowsour.2013.03.170 ↗
6. A comparative study of equivalent circuit models for Li-ion batteries10.1016/j.jpowsour.2011.10.013 ↗
7. A physically meaningful equivalent circuit network model of a lithium-ion battery accounting for local electrochemical and thermal behaviour, variable double layer capacitance and degradation10.1016/j.jpowsour.2016.05.051 ↗
8. Mathematical modeling of the lead-acid cell
9. Mathematical modeling of the lead-acid cell
10. Mathematical analysis of a Zn/NiOOH cell10.1149/1.2120009 ↗
11. Applications of mathematical models in lead-acid battery design10.1109/62.59262 ↗
12. A new open computational framework for highly-resolved coupled three-dimensional multiphysics simulations of Li-ion cells10.1016/j.jpowsour.2013.08.040 ↗
13. Multi-dimensional modeling of large-scale lithium-ion batteries10.1016/j.jpowsour.2013.09.103 ↗
14. Modeling for the scale-up of a lithium-ion polymer battery10.1016/j.jpowsour.2008.10.019 ↗
15. Effect of electrode configuration on the thermal behavior of a lithium-polymer battery10.1016/j.jpowsour.2007.09.054 ↗
16. Modelling the thermal behaviour of a lithium-ion battery during charge10.1016/j.jpowsour.2011.01.103 ↗
17. Modeling the dependence of the discharge behavior of a lithium-ion battery on the environmental temperature10.1149/1.3565179 ↗
18. Modeling the thermal behaviors of a lithium-ion battery during constant-power discharge and charge operations10.1149/2.146306jes ↗
19. Three-dimensional thermal modeling of a lithium-ion battery considering the combined effects of the electrical and thermal contact resistances between current collecting tab and lead wire10.1149/2.039303jes ↗
20. Modeling the temperature dependence of the discharge behavior of a lithium-ion battery in low environmental temperature10.1016/j.jpowsour.2013.02.085 ↗
21. Thermal modelling of Li-ion polymer battery for electric vehicle drive cycles10.1016/j.jpowsour.2012.04.015 ↗
22. Theoretical analysis of potential and current distributions in planar electrodes of lithium-ion batteries10.1016/j.electacta.2014.04.040 ↗
23. Transient three-dimensional thermal model for batteries with thin electrodes10.1016/j.jpowsour.2013.05.175 ↗
24. Modeling of the transient behaviors of a lithium-ion battery during dynamic cycling10.1016/j.jpowsour.2014.12.028 ↗
25. Three-dimensional thermal modeling of a lithium-ion battery pack10.1016/j.jpowsour.2012.01.081 ↗
26. Electrical constriction resistance in current collectors of large-scale lithium-ion batteries10.1149/2.041310jes ↗
27. Three-dimensional modeling of electrochemical performance and heat generation of lithium-ion batteries in tabbed planar configurations10.1149/1.3591799 ↗
28. Comparison and validation of methods for estimating heat generation rate of large-format lithium-ion batteries10.1007/s10973-014-3672-z ↗
29. Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles10.1016/j.jpowsour.2005.08.049 ↗
30. Electro-thermal modeling of large format lithium-ion pouch cells: a cell temperature dependent linear polarization expression10.1149/2.0701614jes ↗
31. The electrical conductivity of commercial copper10.1109/PAIEE.1910.6660499 ↗
32. Giancoli · 1995
33. Thermal modeling of the lithium/polymer battery10.1149/1.2049975 ↗
34. Electrochemical-calorimetric studies of lithium-ion cells10.1149/1.1838509 ↗
35. A critical review of thermal issues in lithium-ion batteries10.1149/1.3515880 ↗
36. Thermal analysis of lithium-ion batteries10.1016/j.jpowsour.2004.05.064 ↗
37. A general energy balance for battery systems10.1149/1.2113792 ↗
38. Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management10.1016/j.jpowsour.2009.11.103 ↗
39. Fast and accurate measurement of entropy profiles of commercial lithium-ion cells10.1016/j.electacta.2015.01.191 ↗
40. Thermal design for the pouch-type large-format lithium-ion batteries: I. thermo-electrical modeling and origins of temperature non-uniformity10.1149/2.0831501jes ↗