journal article·2016-11

A critical review of macroscopic modeling studies on Li O2 and Li–air batteries using organic electrolyte: Challenges and opportunities

Xianglin Li, Jing Huang, Amir Faghri

Publisher page

Abstract

Abstract A comprehensive review of the state-of-the-art macroscopic modeling studies on lithium oxygen (Li O2) and lithium air (Li–air) batteries has been presented. The Li O2 battery is a promising device for energy storage in portable electronics and electric vehicles due to its high specific energy. A number of technical challenges need to be addressed in order to bring this technology from laboratory concept to real products. The multi-scale, multi-physics phenomena in a Li O2 battery encompasses a wide range of scientific disciplines, including electrochemistry, heat and mass transfer, and material science. Modeling study provides a powerful tool to understand the charge-species transport phenomena inside a battery that cannot be captured by experimentation. It offers insight to optimize battery design and fabrication. Macroscopic models that treat battery components as continuous media will be the focus of this review while pore-scale sub-models that are integrated with macroscopic models to describe structural changes of battery components (mainly electrodes) will be presented and compared as well. Recent developments and opportunities for future improvement and advancement are also discussed. Finally, a detailed summary of property data relevant to Li O2 batteries is provided because of their critical role in modeling studies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. The rechargeable revolution: a better battery10.1038/507026a ↗
2. Development of a lithium-water-air primary battery
3. A polymer electrolyte-based rechargeable lithium/oxygen battery10.1149/1.1836378 ↗
4. The lithium–oxygen battery with ether-based electrolytes10.1002/anie.201102357 ↗
5. Reactions in the rechargeable lithium-O2 battery with alkyl carbonate electrolytes10.1021/ja2021747 ↗
6. Electrocatalysts for nonaqueous lithium−air batteries: status, challenges, and perspective10.1021/cs300036v ↗
7. Solvating additives drive solution-mediated electrochemistry and enhance toroid growth in non-aqueous Li–O2 batteries10.1038/nchem.2132 ↗
8. A critical review on lithium-air battery electrolytes10.1039/c3cp54165g ↗
9. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
10. Oxygen electrocatalysts in metal-air batteries: from aqueous to nonaqueous electrolytes10.1039/C3CS60248F ↗
11. A critical review of Li/air batteries10.1149/2.086202jes ↗
12. Lithium-air batteries: survey on the current status and perspectives towards automotive applications from a battery industry standpoint10.1002/aenm.201200020 ↗
13. Review on mechanisms and continuum models of multi-phase transport phenomena in porous structures of non-aqueous Li-air batteries10.1016/j.jpowsour.2014.12.078 ↗
14. Fundamental models for fuel cell engineering10.1021/cr020718s ↗
15. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
16. Modeling of lithium-ion batteries10.1016/S0378-7753(03)00282-9 ↗
17. Multiscale modelling and numerical simulation of rechargeable lithium ion batteries: concepts, methods and challenges10.1039/c3ra23502e ↗
18. Non-isothermal modelling of the all-vanadium redox flow battery10.1016/j.electacta.2009.08.009 ↗
19. Fundamental models for flow batteries10.1016/j.pecs.2015.02.001 ↗
20. Newman · 2004
21. Thomas · 2002 · 345
22. Modeling of Li-air batteries with dual electrolyte10.1149/2.010206jes ↗
23. Faghri · 2006
24. Computational modeling of transport limitations in Li-air batteries10.1149/04529.0123ecst ↗
25. Diffusion-limited model for a lithium/air battery with an organic electrolyte10.1016/j.jpowsour.2006.09.099 ↗
26. Modelling the micro–macro homogeneous cycling behaviour of a lithium–air battery10.1016/j.jpowsour.2012.11.053 ↗
27. Carbon-based electrodes for lithium air batteries: scientific and technological challenges from a modeling perspective10.1149/2.012310jss ↗
28. Modeling and experimental study of porous carbon cathodes in Li-O2 cells with non-aqueous electrolyte10.1149/2.004304eel ↗
29. Modeling of volume change phenomena in a Li–air battery10.1016/j.jpowsour.2014.02.044 ↗
30. Modeling of lithium–oxygen batteries with the discharge product treated as a discontinuous deposit layer10.1016/j.jpowsour.2014.09.103 ↗
31. Effects of cathode and electrolyte properties on lithium-air battery performance: computational study10.1016/j.jpowsour.2015.01.024 ↗
32. Optimization of the cathode structure of lithium-air batteries based on a two-dimensional, transient, non-isothermal model10.1149/2.043210jes ↗
33. A modeling study of the pore size evolution in lithium-oxygen battery electrodes10.1149/2.0921508jes ↗
34. Modelling of electrolyte degradation and cycling behaviour in a lithium-air battery10.1016/j.jpowsour.2013.06.043 ↗
35. Electrochemical characterisation and modelling of the mass transport phenomena in LiPF6–EC–EMC electrolyte10.1016/j.electacta.2008.04.023 ↗
36. Measurements of pore size distribution, porosity, effective oxygen diffusivity, and tortuosity of PEM fuel cell electrodes10.1002/fuce.201200017 ↗
37. Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium10.1016/S0017-9310(03)00305-3 ↗
38. Effective-diffusivity measurement of partially-saturated fuel-cell gas-diffusion layers10.1149/2.024211jes ↗
39. Investigation of the through-plane effective oxygen diffusivity in the porous media of PEM fuel cells: effects of the pore size distribution and water saturation distribution10.1016/j.ijheatmasstransfer.2016.03.060 ↗
40. Effect of pore structure, randomness and size on effective mass diffusivity10.1002/aic.690480104 ↗
41. Critical review of the impact of tortuosity on diffusion10.1016/j.ces.2007.03.041 ↗
42. Simple expression for the tortuosity of porous media10.1007/s11242-011-9734-9 ↗
43. Review and advances of direct methanol fuel cells: Part II: modeling and numerical simulation10.1016/j.jpowsour.2012.12.009 ↗
44. Analysis and multi-dimensional modeling of lithium-air batteries10.1149/2.0731501jes ↗
45. Analysis of air cathode performance for lithium-air batteries10.1149/2.092310jes ↗
46. Modeling study of a Li-O2 battery with an active cathode10.1016/j.energy.2014.12.062 ↗
47. Patankar · 1980
48. Huebner · 2001
49. Smith · 1985
50. A multiscale physical model of electrochemical energy storage devices10.1149/04527.0011ecst ↗
51. Electrochemical model for ionic liquid electrolytes in lithium batteries10.1016/j.electacta.2015.07.003 ↗
52. Identifying capacity limitations in the Li/oxygen battery using experiments and modeling10.1149/1.3527055 ↗
53. Characterization of the lithium/oxygen organic electrolyte battery10.1149/1.1498256 ↗
54. Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation: Part I. Current status of modeling research and model development10.1016/j.jpowsour.2006.01.078 ↗
55. Discharge characteristic of a non-aqueous electrolyte Li/O2 battery10.1016/j.jpowsour.2009.08.088 ↗
56. Oxygen reduction reaction catalyst on lithium/air battery discharge performance10.1039/c0jm04170j ↗
57. Mesoporous α-MnO2/Pd catalyst air electrode for rechargeable lithium–air battery10.1016/j.jpowsour.2010.09.112 ↗
58. A stable cathode for the aprotic Li–O2 battery10.1038/nmat3737 ↗
59. Materials challenges in rechargeable lithium-air batteries10.1557/mrs.2014.87 ↗
60. Improvement of electrochemical properties of lithium-oxygen batteries using a silver electrode10.1021/acs.jpcc.5b04653 ↗
61. RuO2 nanoparticles decorated MnOOH/C as effective bifunctional electrocatalysts for lithium-air battery cathodes with long-cycling stability10.1016/j.jpowsour.2016.05.131 ↗
62. Reversible and higher-rate Li-O2 battery10.1126/science.1223985 ↗
63. Decoupled bifunctional air electrodes for high-performance hybrid lithium-air batteries10.1016/j.nanoen.2014.07.002 ↗
64. Modeling discharge deposit formation and its effect on lithium-air battery performance10.1016/j.electacta.2012.04.137 ↗
65. Modeling study of a Li-O2 battery with an active cathode10.1016/j.energy.2014.12.062 ↗
66. Impact of the cathode microstructure on the discharge performance of lithium air batteries: a multiscale model10.1149/2.002408jes ↗
67. Comprehensive model for non-aqueous lithium air batteries involving different reaction mechanisms10.1149/2.0121504jes ↗
68. Capacity enhancement of a lithium oxygen flow battery10.1016/j.electacta.2015.06.071 ↗
69. Combined effects of oxygen diffusion and electronic resistance in Li-air batteries with carbon nanofiber cathodes10.1149/2.0721412jes ↗
70. Some possible approaches for improving the energy density of Li-air batteries10.1149/1.3486114 ↗
71. Micro-macroscopic coupled modeling of batteries and fuel cells II. Application to nickel-cadmium and nickel-metal hydride cells10.1149/1.1838821 ↗
72. Rate-dependent morphology of Li2O2 growth in Li–O2 batteries10.1021/jz401973c ↗
73. Modelling of operation of a lithium-air battery with ambient air and oxygen-selective membrane10.1016/j.jpowsour.2013.10.128 ↗
74. Defining the transfer coefficient in electrochemistry: an assessment (IUPAC technical report)10.1515/pac-2014-5026 ↗
75. Bard · 2000
76. The electrochemistry of noble metal electrodes in aprotic organic solvents containing lithium salts10.1016/0022-0728(91)85370-5 ↗
77. Electrical conductivity in Li2O2 and its role in determining capacity limitations in non-aqueous Li-O2 batteries10.1063/1.3663385 ↗
78. Kinetics of oxygen reduction in aprotic Li−O2 cells: a model-based study10.1021/jz5018202 ↗
79. The influence of catalysts on discharge and charge voltages of rechargeable Li–Oxygen batteries10.1149/1.3363047 ↗
80. Advances in understanding mechanisms underpinning lithium–air batteries10.1038/nenergy.2016.128 ↗
81. Modeling of lithium–oxygen batteries with the discharge product treated as a discontinuous deposit layer10.1016/j.jpowsour.2014.09.103 ↗
82. Correlating Li/O2 cell capacity and product morphology with discharge current10.1021/acsami.5b00574 ↗
83. Charge transport in lithium peroxide: relevance for rechargeable metal–air batteries10.1039/c3ee41632a ↗
84. Grain boundary induced conductivity in Li2O210.1021/jp405315k ↗
85. Lithium peroxide surfaces are metallic, while lithium oxide surfaces are not10.1021/ja208944x ↗
86. Nimmo · 2004 · 295
87. Pore size distribution analysis of microporous carbons: a density functional theory approach10.1021/j100120a035 ↗
88. Carbon nanofoam-based cathodes for Li–O2 batteries: correlation of pore–solid architecture and electrochemical performance10.1149/2.070309jes ↗
89. A gradient porous cathode for non-aqueous lithium-air batteries leading to a high capacity10.1016/j.elecom.2014.06.026 ↗
90. An analytical relationship for calculating the effective diffusivity of micro-porous layers10.1016/j.ijhydene.2015.06.067 ↗
91. Theoretical examination of effective oxygen diffusion coefficient and electrical conductivity of polymer electrolyte fuel cell porous components10.1016/j.jpowsour.2016.07.107 ↗
92. Franco · 2011
93. The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems - the solid electrolyte interphase model10.1149/1.2128859 ↗
94. Mathematical model of the dendritic growth during lithium electrodeposition10.1016/j.jpowsour.2013.01.014 ↗
95. Modeling dendrite growth during lithium electrodeposition at sub-ambient temperature10.1016/j.jpowsour.2013.07.056 ↗
96. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
97. Lithium ion battery graphite solid electrolyte interphase revealed by microscopy and spectroscopy10.1021/jp3118055 ↗
98. Surface characterization of the carbon cathode and the lithium anode of Li−O2 batteries using LiClO4 or LiBOB salts10.1021/am3026129 ↗
99. Protective layers of B containing glass ceramic and LiPON for lithium electrode in rechargeable Li-O2 batteries
100. Composite protective layer for Li metal anode in high-performance lithium-oxygen batteries10.1016/j.elecom.2013.12.022 ↗