journal article·2005-12

Thermodynamic equilibrium calculations of dimethyl ether steam reforming and dimethyl ether hydrolysis

Troy A. Semelsberger, Rodney L. Borup

Publisher page

Abstract

Abstract The production of a hydrogen-rich fuel-cell feed by dimethyl ether (DME) steam reforming was investigated using calculations of thermodynamic equilibrium as a function of steam-to-carbon ratio (0.00–4.00), temperature (100–600 °C), pressure (1–5 atm), and product species. Species considered were acetone, acetylene, carbon dioxide, carbon monoxide, dimethyl ether, ethane, ethanol, ethylene, formaldehyde, formic acid, hydrogen, isopropanol, methane, methanol, methyl-ethyl ether, n -propanol and water. Thermodynamic equilibrium calculations of DME steam reforming indicate complete conversion of dimethyl ether to hydrogen, carbon monoxide and carbon dioxide at temperatures greater than 200 °C and steam-to-carbon ratios greater than 1.25 at atmospheric pressure ( P = 1 atm). Increasing the operating pressure shifts the equilibrium toward the reactants; increasing the pressure from 1 to 5 atm decreases the conversion of dimethyl ether from 99.5 to 76.2%. The trend of thermodynamically stable products in decreasing mole fraction is methane, ethane, isopropyl alcohol, acetone, n -propanol, ethylene, ethanol, methyl-ethyl ether and methanol–formaldehyde, formic acid, and acetylene were not observed. Based on the equilibrium calculations, the optimal processing conditions for dimethyl ether steam reforming occur at a steam-to-carbon ratio of 1.50, a pressure of 1 atm, and a temperature of 200 °C. These thermodynamic equilibrium calculations show dimethyl ether processed with steam will produce hydrogen-rich fuel-cell feeds—with hydrogen concentrations exceeding 70%. The conversion of dimethyl ether via hydrolysis (considering methanol as the only product) is limited by thermodynamic equilibrium. Equilibrium conversion increases with temperature and steam-to-carbon ratio. A maximum dimethyl ether conversion of 62% is achieved at a steam-to-carbon ratio of 5.00 and a processing temperature of 600 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Zeolite Catalysis and Synthesis · Catalysts for Methane Reforming · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Fleisch · 2002
2. Muller · J. Electrochem. Soc. · 2000 · 147 · 405810.1149/1.1394018 ↗
3. Murray · J. Electrochem. Soc. · 2002 · 149 · A112710.1149/1.1496484 ↗
4. Semelsberger · Int. J. Hydrogen Energy · 2004 · 29 · 104710.1016/S0360-3199(03)00214-3 ↗
5. Sobyanin · Energy Fuels · 2000 · 14 · 113910.1021/ef990201s ↗
6. Wang · Electrochem. Solid State Lett. · 2002 · 5 · A17710.1149/1.1489135 ↗
7. Yomada, Koji, Asazawa, Koichiro, Tanaka, Hirohisa, Dimethyl ether reforming catalyst, Daihatsu Motor Co., Ltd., 653362 [6,605,559] (2003).
8. Bhattacharyya, Alakananda, Basu, Arunabha, Process for hydroshifting dimethyl ether, Amoco Corporation, 356492 [5,498,370] (1996).
9. Semelsberger · 2004
10. Galvita · Appl. Catal. A: Gen. · 2001 · 216 · 8510.1016/S0926-860X(01)00540-3 ↗
11. Semelsberger · 2004
12. Keil · Micropor. Mesopor. Mater. · 1999 · 29 · 4910.1016/S1387-1811(98)00320-5 ↗
13. Shikada · Stud. Surf. Sci. Catal. · 1998 · 119 · 51510.1016/S0167-2991(98)80483-7 ↗
14. Stocker · Micropor. Mesopor. Mater. · 1999 · 29 · 310.1016/S1387-1811(98)00319-9 ↗
15. Zheng · Chin. J. Chem. · 2001 · 19 · 6710.1002/cjoc.20010190112 ↗
16. Haggin · Chem. Eng. News · 1991 · 69 · 2010.1021/cen-v069n033.p020 ↗
17. Kim · Kor. J. Chem. Eng. · 2001 · 18 · 83810.1007/BF02705605 ↗
18. Peng · Ind. Eng. Chem. Res. · 1999 · 38 · 438110.1021/ie9901269 ↗
19. Qi · React. Kinet. Catal. Lett. · 2001 · 73 · 24510.1023/A:1014194804329 ↗
20. Shen · Kor. J. Chem. Eng. · 2000 · 17 · 21010.1007/BF02707145 ↗
21. Shikada · Kinet. Catal. · 1999 · 40 · 395
22. Wang · Chin. J. Chem. Eng. · 2001 · 9 · 412
23. M. Xu, J.H. Lunsford, D.W. Goodman, A. Bhattacharyya, Appl. Catal. A: Gen. 149 (2) 289–301.10.1016/S0926-860X(96)00275-X ↗
24. N. Elam, The Bio-DME Project, 2002.
25. Fleisch · Stud. Surf. Sci. Catal. · 1997 · 107 · 11710.1016/S0167-2991(97)80323-0 ↗
26. D.W. Gill, 9th IEA Workshop, Paris, 2001.
27. J.B. Hansen, S. Mikkelsen, DME as a transportation fuel, 2001.
28. Huang · Proc. Inst. Mech. Eng. D: J. Automob. Eng. · 1999 · 213 · 64710.1243/0954407991527161 ↗
29. International Energy Agency, Dimethyl ether as automotive fuel, DME Newsletter 3, 1999.
30. International Energy Agency, Dimethyl ether as automotive fuel, DME Newsletter 4, 2000.
31. Roy · JSME Int. J. Ser. B: Fluids Therm. Eng. · 2000 · 43 · 51110.1299/jsmeb.43.511 ↗
32. Wang · Proc. Inst. Mech. Eng. D: J. Automob. Eng. · 2000 · 214 · 50310.1243/0954407001527790 ↗
33. Wang · Proc. Inst. Mech. Eng. D: J. Automob. Eng. · 2000 · 214 · 10110.1243/0954407001527268 ↗
34. Chapman · 2002
35. Chen · JSME Int. J. Ser. B: Fluids Therm. Eng. · 2000 · 43 · 8210.1299/jsmeb.43.82 ↗
36. Rouhi · Chem. Eng. News · 1995 · 73 · 3710.1021/cen-v073n006.p037 ↗
37. Sun · Gen. Rev. · 2003 · 20
38. Y. Ohno, N. Inoue, T. Ogawa, M. Ono, T. Shikada, H. Hayashi, NKK Technical Review, 2001.
39. Perry · 1999
40. Bandiera · Appl. Catal. · 1991 · 69 · 13910.1016/S0166-9834(00)83297-2 ↗
41. Freeman · J. Catal. · 2002 · 205 · 35810.1006/jcat.2001.3446 ↗
42. Hutchings · Micropor. Mesopor. Mater. · 1999 · 29 · 6710.1016/S1387-1811(98)00321-7 ↗
43. Hytha · Chem. A Eur. J. · 2001 · 7 · 252110.1002/1521-3765(20010618)7:12<2521::AID-CHEM25210>3.0.CO;2-N ↗
44. Klier · Catal. Today · 1997 · 36 · 310.1016/S0920-5861(96)00190-3 ↗
45. Park · Ind. Eng. Chem. Res. · 2001 · 40 · 417210.1021/ie0008530 ↗
46. Park · Ind. Eng. Chem. Res. · 2001 · 40 · 418710.1021/ie000854s ↗
47. Xu · Appl. Catal. A: Gen. · 1997 · 149 · 30310.1016/S0926-860X(96)00276-1 ↗