Analysis of the electrochemical behaviour of polymer electrolyte fuel cells using simple impedance models
Source abstract
Abstract
Abstract The analysis of the electrochemical behaviour of polymer electrolyte fuel cells (PEFC) both in time and frequency domain requires appropriate impedance models. Simple impedance models with lumped parameters as resistances and capacitances or Warburg impedances do have limitations: often the validity is limited to a certain frequency range, effects at very low or very high frequencies can not be described properly. However, these models have their usefulness for engineering applications, e.g. to distinguish the major loss terms, to estimate the membrane resistance, and to observe the changes of internal losses of fuel cells over time without the need for additional sensors. The work discusses different impedance configurations and their applicability to impedance spectra of a fuel cell stack. Impedance spectra at points along the DC polarization curve, as well as spectra at various operating conditions are analysed and identified by a complex nonlinear least squares method. Finally, the connection of the impedance data with and the assignment of the parameters to physical phenomena are discussed. The examination shows that simple impedance models are well qualified to describe the electrochemical behaviour over a wide frequency range at all operating conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Conducting polymers and applications · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Amphlett · J. Electrochem. Soc. · 1995 · 142 · 110.1149/1.2043866 ↗
2. Kim · J. Electrochem. Soc. · 1995 · 142 · 267010.1149/1.2050072 ↗
3. Andreaus · Electrochim. Acta · 2002 · 47 · 222310.1016/S0013-4686(02)00059-2 ↗
4. Le Canut · J. Electrochem. Soc. · 2006 · 153 · A85710.1149/1.2179200 ↗
5. Macdonald · 2005
6. Agarwal · J. Electrochem. Soc. · 1992 · 139 · 191710.1149/1.2069522 ↗
7. Piela · J. Electrochem. Soc. · 2006 · 153 · A190210.1149/1.2266623 ↗
8. B.H. Andreaus, Die Polymer-Elektrolyt-Brennstoffzelle-Charakterisierung ausgewählter Phänomene durch elektrochemische Impedanzspektroskopie (German), Ph.D. Thesis, EPF Lausanne, Switzerland, 2002.
9. Lasia · 1999
10. Raistrick · 2005
11. Bauerle · J. Phys. Chem. Solids · 1969 · 30 · 265710.1016/0022-3697(69)90039-0 ↗
12. Ivers-Tiffée · 2003
13. 2005
14. 1999
15. A. Hakenjos, Untersuchung zum Wasserhaushalt von Polymerelektrolytmembran-Brennstoffzellen (German), Ph.D. Thesis, Albert-Ludwig University Freiburg, Germany, 2006.
16. H. Kuhn, In-Situ Charakterisierung von Polymer-Elektrolyt Brennstoffzellen mittels Elektrochemischer Impedanzspektroskopie (German), Ph.D. Thesis, ETH Zürich, Switzerland, 2006.
17. Wagner · J. Appl. Electrochem. · 2002 · 32 · 85910.1023/A:1020551609230 ↗
18. in Electrochemical applications: advances in electrochemical applications of impedance spectroscopy
19. Holland · SIAM J. Comput. · 1973 · 2 · 8810.1137/0202009 ↗
20. Rechenberg · 1973
21. Quagliarella · 1998
22. Nelder · Comput. J. · 1965 · 7 · 30810.1093/comjnl/7.4.308 ↗
23. Chelouah · Eur. J. Oper. Res · 2003 · 148 · 33510.1016/S0377-2217(02)00401-0 ↗
24. Schneider · J. Electrochem. Soc · 2005 · 152 · A209210.1149/1.2032409 ↗
25. L. Schindele, Einsatz eines leistungselektronischen Stellglieds zur Parameteridentifikation und optimalen Betriebsführung von PEM-Brennstoffzellensystemen (German), Ph.D. Thesis, University Karlsruhe, Germany, 2006.
26. Electrochemical parameter identification: an efficient method for fuel cell impedance characterisation10.1016/j.jpowsour.2008.04.071 ↗