journal article·2018-07

Assessment of all-solid-state lithium-ion batteries

P. Braun, C. Uhlmann, M. Weiss, A. Weber, E. Ivers-Tiffée

Publisher page

Abstract

Abstract All-solid-state lithium-ion batteries (ASSBs) are considered as next generation energy storage systems. A model might be very useful, which describes all contributions to the internal cell resistance, enables an optimization of the cell design, and calculates the performance of an open choice of cell architectures. A newly developed one-dimensional model for ASSBs is presented, based on a design concept which employs the use of composite electrodes. The internal cell resistance is calculated by linking two-phase transmission line models representing the composite electrodes with an ohmic resistance representing the solid electrolyte (separator). Thereby, electrical parameters, i.e. ionic and electronic conductivity, electrochemical parameters, i.e. charge-transfer resistance at interfaces and lithium solid-state diffusion, and microstructure parameters, i.e. electrode thickness, particle size, interface area, phase composition and tortuosity, are considered as the most important material and design parameters. Subsequently, discharge curves are simulated, and energy- and power-density characteristics of all-solid-state cell architectures are calculated. These model calculations are discussed and compared with experimental data from literature for a high power LiCoO2-Li10GeP2S12/Li10GeP2S12/Li4Ti5O12-Li10GeP2S12 cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. A solid future for battery development10.1038/nenergy.2016.141 ↗
2. Inorganic solid Li ion conductors: an overview10.1016/j.ssi.2009.03.022 ↗
3. Inorganic solid-state electrolytes for lithium batteries: mechanisms and properties governing ion conduction10.1021/acs.chemrev.5b00563 ↗
4. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
5. Interphase formation on lithium solid electrolytes—an in situ approach to study interfacial reactions by photoelectron spectroscopy10.1016/j.ssi.2015.06.001 ↗
6. In-situ Li7La3Zr2O12/LiCoO2 interface modification for advanced all-solid-state battery10.1016/j.jpowsour.2014.02.102 ↗
7. Negating interfacial impedance in garnet-based solid-state Li metal batteries10.1038/nmat4821 ↗
8. Universal soldering of lithium and sodium alloys on various substrates for batteries
9. Comprehensive characterization of all-solid-state thin films commercial microbatteries by Electrochemical Impedance Spectroscopy10.1016/j.jpowsour.2016.04.057 ↗
10. High-power all-solid-state batteries using sulfide superionic conductors
11. Porous-electrode theory with battery applications10.1002/aic.690210103 ↗
12. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
13. Modelling polymer electrolytes for 3D-microbatteries using finite element analysis10.1016/j.electacta.2011.03.026 ↗
14. Modeling all-solid-state Li-Ion batteries10.1149/1.3521414 ↗
15. Charge∕Discharge simulation of an all-solid-state thin-film battery using a one-dimensional model10.1149/2.041202jes ↗
16. Simulation of the effect of contact area loss in all-solid-state Li-Ion batteries10.1149/2.0481711jes ↗
17. The distribution of relaxation times as basis for generalized time-domain models for Li-ion batteries10.1016/j.jpowsour.2012.07.100 ↗
18. Approximability of impedance spectra by RC elements and implications for impedance analysis10.1016/j.elecom.2015.05.018 ↗
19. Modeling graphite anodes with serial and transmission line models10.1016/j.jpowsour.2015.02.038 ↗
20. Stromverteilung in porösen elektroden10.1016/0013-4686(60)80025-4 ↗
21. Anomalous transport effects in the impedance of porous film electrodes10.1016/S1388-2481(99)00084-3 ↗
22. On the origin and application of the Bruggeman correlation for analysing transport phenomena in electrochemical systems10.1016/j.coche.2016.02.006 ↗
23. A consistent derivation of the impedance of a lithium-ion battery electrode and its dependency on the state-of-charge10.1016/j.electacta.2017.05.009 ↗
24. Three-dimensional reconstruction of a composite cathode for lithium-ion cells10.1016/j.elecom.2010.12.004 ↗
25. Reconstruction of porous electrodes by FIB/SEM for detailed microstructure modeling10.1016/j.jpowsour.2010.10.006 ↗
26. Anode microstructures from high-energy and high-power lithium-ion cylindrical cells obtained by X-ray nano-tomography10.1016/j.jpowsour.2014.07.070 ↗
27. Ender · 2014
28. Diffusion impedance in planar, cylindrical and spherical symmetry10.1016/0013-4686(94)E0192-3 ↗
29. A novel method for measuring the effective conductivity and the contact resistance of porous electrodes for lithium-ion batteries10.1016/j.elecom.2013.05.037 ↗
30. Lithium diffusion in Li4/3Ti5/3O4 particles during insertion and extraction10.1149/1.3574037 ↗
31. Kinetic characterization of single particles of LiCoO2 by AC impedance and potential step methods10.1149/1.1359197 ↗
32. Common electroanalytical behavior of Li intercalation processes into graphite and transition metal Oxides10.1149/1.1838758 ↗
33. Quantitative characterization of LiFePO4 cathodes reconstructed by FIB/SEM tomography10.1149/2.033207jes ↗
34. Wurst · 2016
35. Electrochemical impedance spectroscopy analysis for lithium-ion battery using Li4Ti5O12 anode10.1016/j.jpowsour.2012.09.010 ↗