journal article·2017-03

New design of a cathode flow-field with a sub-channel to improve the polymer electrolyte membrane fuel cell performance

Yulin Wang, Like Yue, Shixue Wang

Publisher page

Abstract

Abstract The cathode flow-field design of polymer electrolyte membrane (PEM) fuel cells determines the distribution of reactant gases and the removal of liquid water. A suitable design can result in perfect water management and thus high cell performance. In this paper, a new design for a cathode flow-field with a sub-channel was proposed and had been experimentally analyzed in a parallel flow-field PEM fuel cell. Three sub-channel inlets were placed along the cathode channel. The main-channel inlet was fed with moist air to humidify the membrane and maintain high proton conductivity, whereas, the sub-channel inlet was fed with dry air to enhance water removal in the flow channel. The experimental results indicated that the sub-channel design can decrease the pressure drop in the flow channel, and the sub-channels inlet positions (SIP, where the sub-channel inlets were placed along the cathode channel) and flow rates (SFR, percentage of air from the sub-channel inlet in the total cathode flow rate) had a considerable impact on water removal and cell performance. A proposed design that combines the SIP and SFR can effectively eliminate water from the fuel cell, increasing the maximum power density by more than 13.2% compared to the conventional design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Membrane-based Ion Separation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Water recovery and air humidification by condensing the moisture in the outlet gas of a proton exchange membrane fuel cell stack10.1016/j.applthermaleng.2012.02.045 ↗
2. Proposal and examination of method of water removal from gas diffusion layer by applying slanted microgrooves inside gas channel in separator to improve polymer electrolyte fuel cell performance10.1016/j.jpowsour.2015.01.050 ↗
3. Investigation of the through-plane effective oxygen diffusivity in the porous media of PEM fuel cells: effects of the pore size distribution and water saturation distribution10.1016/j.ijheatmasstransfer.2016.03.060 ↗
4. Modeling liquid water effects in the gas diffusion and catalyst layers of the cathode of a PEM fuel cell10.1149/1.1808633 ↗
5. A new flow field design for polymer electrolyte-based fuel cells10.1016/j.elecom.2006.10.031 ↗
6. Experimental optimization of parallel and interdigitated PEMFC flow-field channel geometry10.1016/j.ijhydene.2015.11.153 ↗
7. Performance enhancement of polymer electrolyte fuel cells by combining liquid removal mechanisms of a gas diffusion layer with wettability distribution and a gas channel with microgrooves10.1016/j.jpowsour.2016.05.036 ↗
8. Investigation of polymer electrolyte membrane fuel cell parallel flow field with induced cross flow10.1016/j.jpowsour.2011.09.047 ↗
9. Numerical study on cell performance and local transport phenomena of PEM fuel cells with novel flow field designs10.1016/j.jpowsour.2006.05.007 ↗
10. The impact of channel path length on PEMFC flow-field design10.1016/j.jpowsour.2006.01.099 ↗
11. Novel serpentine-baffle flow field design for proton exchange membrane fuel cells10.1016/j.jpowsour.2007.08.037 ↗
12. Three-dimensional numerical analysis of PEM fuel cells with straight and wave-like gas flow fields channels10.1016/j.jpowsour.2007.11.065 ↗
13. Performance of a proton exchange membrane fuel cell with a stepped flow field design10.1016/j.jpowsour.2008.10.048 ↗
14. Increasing the efficiency of a portable PEM fuel cell by altering the cathode channel geometry: a numerical and experimental study10.1016/j.apenergy.2009.09.001 ↗
15. Non-isothermal transport phenomenon and cell performance of a cathodic PEM fuel cell with a baffle plate in a tapered channel10.1016/j.apenergy.2010.07.006 ↗
16. An experimental study on the enhancement of the water balance, electrochemical reaction and power density of the polymer electrolyte fuel cell by under-rib convection10.1016/j.elecom.2011.08.015 ↗
17. Influences of operational factors on proton exchange membrane fuel cell performance with modified interdigitated flow field design10.1016/j.jpowsour.2013.01.020 ↗
18. Review of bipolar plates in PEM fuel cells: flow-field designs10.1016/j.ijhydene.2004.09.019 ↗
19. In situ comparison of water content and dynamics in parallel, single-serpentine, and interdigitated flow fields of polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2009.12.031 ↗
20. Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review10.1016/j.ijhydene.2012.07.076 ↗
21. Evaluation and modeling of PEM fuel cells with the Bruggeman correlation under various tortuosity factors10.1016/j.ijheatmasstransfer.2016.09.030 ↗