journal article·2007-05

Analysis of the energy efficiency of an integrated ethanol processor for PEM fuel cell systems

Javier A. Francesconi, Miguel C. Mussati, Roberto O. Mato, Pio A. Aguirre

Journal of Power Sources· Volume 167· Issue 1
Publisher page

Abstract

Abstract The aim of this work is to investigate the energy integration and to determine the maximum efficiency of an ethanol processor for hydrogen production and fuel cell operation. Ethanol, which can be produced from renewable feedstocks or agriculture residues, is an attractive option as feed to a fuel processor. The fuel processor investigated is based on steam reforming, followed by high- and low-temperature shift reactors and preferential oxidation, which are coupled to a polymeric fuel cell. Applying simulation techniques and using thermodynamic models the performance of the complete system has been evaluated for a variety of operating conditions and possible reforming reactions pathways. These models involve mass and energy balances, chemical equilibrium and feasible heat transfer conditions (ΔTmin). The main operating variables were determined for those conditions. The endothermic nature of the reformer has a significant effect on the overall system efficiency. The highest energy consumption is demanded by the reforming reactor, the evaporator and re-heater operations. To obtain an efficient integration, the heat exchanged between the reformer outgoing streams of higher thermal level (reforming and combustion gases) and the feed stream should be maximized. Another process variable that affects the process efficiency is the water-to-fuel ratio fed to the reformer. Large amounts of water involve large heat exchangers and the associated heat losses. A net electric efficiency around 35% was calculated based on the ethanol HHV. The responsibilities for the remaining 65% are: dissipation as heat in the PEMFC cooling system (38%), energy in the flue gases (10%) and irreversibilities in compression and expansion of gases. In addition, it has been possible to determine the self-sufficient limit conditions, and to analyze the effect on the net efficiency of the input temperatures of the clean-up system reactors, combustion preheating, expander unit and crude ethanol as fuel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalysts for Methane Reforming · Catalytic Processes in Materials Science · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Mielenz · Curr. Opin. Biotechnol. · 2001 · 4 · 324
2. Haryanto · Energy Fuels · 2005 · 19 · 209810.1021/ef0500538 ↗
3. Vaidya · Chem. Eng. J. · 2006 · 117 · 3910.1016/j.cej.2005.12.008 ↗
4. Benito · J. Power Sources · 2005 · 151 · 1110.1016/j.jpowsour.2005.02.046 ↗
5. Kugai · Catal. Lett. · 2005 · 101 · 25510.1007/s10562-005-4901-7 ↗
6. Akande · Appl. Catal. A: Gen. · 2005 · 287 · 15910.1016/j.apcata.2005.03.046 ↗
7. Lyubovsky · J. Power Sources · 2006 · 162 · 59710.1016/j.jpowsour.2006.07.035 ↗
8. Deluga · Science · 2004 · 303 · 99310.1126/science.1093045 ↗
9. Salge · J. Catal. · 2005 · 235 · 6910.1016/j.jcat.2005.07.021 ↗
10. Godat · J. Power Sources · 2003 · 118 · 41110.1016/S0378-7753(03)00107-1 ↗
11. Ratnamala · Ind. Eng. Chem. Res. · 2005 · 44 · 153510.1021/ie0498450 ↗
12. A.D. Little, Multi-Fuel Reformers for Fuel Cells Used in Transportation-Multi-Fuel Reformers. Phase I. Final Report, Report #DOE/CE/50343-2, prepared for U.S. Department of Energy, Office of Transportation Technologies. Arthur D. Little Inc., Cambridge, 1994.
13. Ioannides · J. Power Sources · 2001 · 92 · 1710.1016/S0378-7753(00)00498-5 ↗
14. Song · J. Power Sources · 2005 · 145 · 50210.1016/j.jpowsour.2005.02.060 ↗
15. Örücü · J. Chem. Technol. Biotechnol. · 2005 · 80 · 110310.1002/jctb.1288 ↗
16. Kivisaari · J. Power Sources · 2001 · 94 · 11210.1016/S0378-7753(00)00632-7 ↗
17. Ersoz · J. Power Sources · 2006 · 154 · 6710.1016/j.jpowsour.2005.02.092 ↗
18. Ersoz · Energy · 2006 · 31 · 149010.1016/j.energy.2005.05.018 ↗
19. HYSYS, AEA Technology. Calgary, Hyprotech Ltd., Canada, 2001.
20. Marechal · Fuel Cells · 2005 · 5 · 510.1002/fuce.200400055 ↗
21. García · Int. J. Hydrogen Energy · 1991 · 16 · 30710.1016/0360-3199(91)90166-G ↗
22. Vasudeva · Int. J. Hydrogen Energy · 1996 · 21 · 1310.1016/0360-3199(95)00030-H ↗
23. Fishtik · Int. J. Hydrogen Energy · 2000 · 25 · 3110.1016/S0360-3199(99)00004-X ↗
24. B. Linnhoff, D. Townsend, P. Boland, G.F. Hewitt, B.E.A. Thomas, A.R. Guy, R.H. Marsland, A User Guide on Process Integration for the Efficient Use of Energy, Institute of Chemical Engineers, Rugby, UK, 1985.
25. Ulf Bossel, Well-to-Wheel Studies, Heating Values, and the Energy Conservation Principle European Fuel Cell Forum, 29 October 2003. http://www.efcf.com/reports/E10.pdf.
26. Larminie · 2000