journal article·2025-01Open access

Layer by layer self-assembly of metal-phenolic networks on carbon fibers for enhancement in interfacial adhesion of epoxy composites

Zhiqiang Yao, Anqi Xia, Kaining Zhang, Mingdong Yu, Dongzhi Wang, Wengang Xiao, Weiwei Liu, Jinna Wang

Abstract

Currently, various studies have been conducted on the surface treatment of carbon fibers (CF), but most methods suffer from various shortcomings such as environmental pollution, high costs, complex processes, and damage to the fibers themselves. This paper aims to improve the interface bonding between CF and epoxy resin , and proposes a low-cost, environmentally friendly, and mild strategy for treating CF without strength reduction. Tannic acid (TA) and iron ions (Fe 3+ ) were deposited on CF through layer-by-layer self-assembly method to form metal-polyphenol networks (MPN) coating. The effects of deposition cycles on the surface morphology , chemical properties and interfacial bonding properties of CF/epoxy composites were studied. The introduction of MPN can increase the roughness of CF and improve the wettability of resin. As the number of self-assembly cycles was 1, the modified CF composites held the best interfacial properties , and the interlaminar shear strength (ILSS), flexural strength , transverse fiber bundle tensile (TFBT) and interfacial shear strength (IFSS) were increased by 36.7 %, 47.7 %, 46.3 % and 42.6 %, respectively. MPN can firmly bond CF and resin together, forming an interphase region with continuous modulus transition, allowing stress to propagate continuously between the matrix and the reinforcement. The protrusions formed by MPN can mechanically engage with the resin, thereby deflecting cracks, extending the propagation path of cracks, and consuming more energy during the failure process of composites. This work proposes a novel and promising strategy for the preparation of high-performance CF composites from the perspective of green environmental protection and high efficiency.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Synthesis and properties of polymers · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Enhancement of interfacial performance of carbon fiber reinforced polypropylene composites by dual action of polyetherimide nanoparticles and coatings10.1016/j.colsurfa.2024.133776 ↗
2. Rapid and scalable synthesis of novel carboxylated aramid nanofibers for simultaneously improving the strength and toughness of carbon fiber/epoxy laminates
3. New strategy for enhancing interfacial adhesion between carbon fiber and epoxy by using mussel-inspired polydopamine-Fe complex nanospheres10.1016/j.compositesb.2023.111032 ↗
4. Recent advances of interphases in carbon fiber-reinforced polymer composites: a review10.1016/j.compositesb.2022.109639 ↗
5. Tuning interlaminar fracture toughness of fine z-pin reinforced polymer composite10.1016/j.matdes.2021.110293 ↗
6. A mussel-inspired strategy for CNT/carbon fiber reinforced epoxy composite by hierarchical surface modification10.1016/j.colsurfa.2021.128085 ↗
7. Interfacial strengthening of carbon fiber/polypropylene composites via a modified acrylate nanoemulsion
8. Mussel-tailored carbon fiber/carbon nanotubes interface for elevated interfacial properties of carbon fiber/epoxy composites10.1016/j.cej.2021.132449 ↗
9. Two-dimensional polydopamine nano-protrusion-modified graphene oxide encapsulation of cylindrical carbon fiber by vacuum filtration to strengthen the interphase of epoxy composites
10. Covalent treatment of carbon fibre with functionalized MoS2 nanosheets using thiol-ene click chemistry: the improvement of interface in multiscale epoxy composites10.1016/j.compositesb.2022.109821 ↗
11. Uniform growth of carbon nanotubes on carbon fiber cloth after surface oxidation treatment to enhance interfacial strength of composites10.1016/j.compscitech.2020.108198 ↗
12. Fracture investigation of functionalized carbon nanotubes-grown carbon fiber fabrics/epoxy composites10.1016/j.compscitech.2020.108161 ↗
13. Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion10.1016/j.compscitech.2020.108196 ↗
14. Comparing the properties of commercially treated and air plasma treated carbon fibers
15. Catalyst optimization and reduction condition of continuous growth of carbon nanotubes on carbon fiber surface10.1016/j.ceramint.2023.05.087 ↗
16. Growing carbon nanotubes on continuous carbon fibers to produce composites with improved interfacial properties: a step towards commercial production and application10.1016/j.compscitech.2021.108870 ↗
17. Electrochemical oxidation of recycled carbon fibers for an improved interaction toward alkali-activated composites10.1016/j.jclepro.2022.133093 ↗
18. Effect of caprolactam modified phenoxy-based sizing material on reactive process of carbon fiber-reinforced thermoplastic polyamide-6
19. Mechanical and electronic property improvement of the carbon fiber/silicone composite coatings by controlling the fiber diameter and surface modification10.1016/j.porgcoat.2023.107861 ↗
20. Two-step method to realize continuous multi-wall carbon nanotube grafted on the fibers to improve the interface of carbon fibers/epoxy resin composites based on the Diels-Alder reaction10.1016/j.carbon.2023.118131 ↗
21. Simultaneous improvement of interfacial strength and toughness between carbon fiber and epoxy by introducing amino functionalized ZrO2 on fiber surface10.1016/j.matdes.2018.03.054 ↗
22. Study on preparation and mechanical properties of bionic carbon fiber reinforced epoxy resin composite with eagle feather structure10.1088/2053-1591/ac0368 ↗
23. Layer-by-layer constructing interface with rigid-flexible transition structure for improving interfacial adhesion of PBO fiber composites10.1016/j.coco.2020.100466 ↗
24. Layer-by-layer macroassembly of inorganic CNTs and MXenes with organic PVA for enhancing the interfacial properties of carbon fiber/epoxy composites10.1016/j.coco.2022.101427 ↗
25. Constructing “Soft‐Stiff” structure on the surface of carbon fiber to enhance the interfacial properties of its epoxy composites10.1002/admi.202201220 ↗
26. Three‐dimensional structured MXene/SiO2 for improving the interfacial properties of composites by self‐assembly strategy10.1002/pc.26358 ↗
27. Layer-by-layer assembled nacre-like polyether amine/GO hierarchical structure on carbon fiber surface toward composites with excellent interfacial strength and toughness
28. Intermittent carbon nanotube encapsulation of carbon fiber: a facile and efficient strategy to simultaneously strengthen and toughen interphase of composites10.1016/j.compositesb.2022.109785 ↗
29. Construction of mussel-inspired "Inorganic-Organic" Hybrids onto a cylindrical carbon fiber via green and rapid manufacturing toward enhanced interfacial adhesion of composites
30. Design of an alternating distributed large and small amounts of CNT/polyether amine coating on carbon fiber to derive enhancement in interfacial adhesion10.1016/j.compscitech.2022.109855 ↗
31. Direct assembly of metal-phenolic network nanoparticles for biomedical applications10.1002/anie.202312925 ↗
32. Polyphenol-mediated assembly for particle engineering10.1021/acs.accounts.0c00150 ↗
33. Polyphenol-mediated assembly of proteins for engineering functional materials10.1002/anie.202002089 ↗
34. Design of carbon fiber with nano accuracy for enrichment interface10.1016/j.compscitech.2022.109734 ↗
35. Codepositing mussel-inspired nanohybrids onto one-dimensional fibers under "green" conditions for significantly enhanced surface/interfacial properties10.1021/acssuschemeng.8b00290 ↗
36. Polydopamine as sizing on carbon fiber surfaces for enhancement of epoxy laminated composites10.1016/j.compositesa.2018.02.003 ↗
37. Simple-effective strategy for surface modification via annealing treatment polydopamine coating10.1016/j.apsusc.2021.150813 ↗
38. Improved the interfacial characteristics of carbon fiber/polyamide 6 composites by synthesizing polydopamine rapidly on the carbon fiber surface with ultrasound-assisted10.1016/j.compscitech.2023.109950 ↗
39. Polydopamine as sizing on carbon fiber surfaces for enhancement of epoxy laminated composites10.1016/j.compositesa.2018.02.003 ↗
40. Development and characterization of pH responsive sodium alginate hydrogel containing metal-phenolic network for anthocyanin delivery10.1016/j.carbpol.2023.121234 ↗
41. Fabrication and characterization of oleogels stabilized by metal-phenolic network coatings-decorated zein nanoparticles10.1016/j.foodchem.2023.137025 ↗
42. Recent progress in membrane technologies based on metal–phenolic networks: a review10.1021/acs.iecr.2c02651 ↗
43. Metal-phenolic network coatings for engineering bioactive interfaces10.1016/j.colsurfb.2021.111851 ↗
44. Metal–phenolic networks as tunable buffering systems10.1021/acs.chemmater.1c00015 ↗
45. One-step assembly of coordination complexes for versatile film and particle engineering10.1126/science.1237265 ↗
46. Self-assembly of nano-to macroscopic metal–phenolic materials10.1021/acs.chemmater.8b02616 ↗
47. Metal-coordinated sub-10 nm membranes for water purification10.1038/s41467-019-12100-0 ↗
48. Effective dual polysulfide rejection by a tannic acid/FeIIIComplex-coated separator in lithium-sulfur batteries10.1021/acsami.8b01189 ↗
49. Coordination-driven multistep assembly of metal-polyphenol films and capsules10.1021/cm403903m ↗
50. Insight into the enhanced interfacial adhesion of carbon fiber reinforced composites a facile ferric ion and tannic acid self-assembly strategy10.1016/j.compositesa.2023.107926 ↗
51. Effect of microstructures of carbon nanoproducts grown on carbon fibers on the interfacial properties of epoxy composites10.1021/acs.langmuir.1c03459 ↗
52. 3-isocyanatopropyltriethoxysilane block-graft engineering tailoring carbon fiber surface to manipulate interface properties of carbon fiber/polyamide 6 composites
53. Mussel-like carbon fiber/MnO 2 nanosheet heterostructures for mechanically strong carbon fiber/polyamide composites with excellent electromagnetic interference shielding10.1016/j.compositesa.2024.108260 ↗
54. Interfacial improvement of carbon fiber/epoxy composites using one-step method for grafting carbon nanotubes on the fibers at ultra-low temperatures10.1016/j.carbon.2020.03.060 ↗
55. Preparation of CNTs/SCF reinforcement using multiple continuous surface treatments to achieve synergistic improvement of epoxy resin-based composites interfacial properties: towards industrial production of carbon fiber surface treatment10.1016/j.porgcoat.2023.108129 ↗
56. Superior and versatile interface transition layer with a sandwich-like multiscale rigid-soft dual-locked structure for high performance composites10.1016/j.apsusc.2019.145238 ↗
57. Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites10.1002/pc.27278 ↗
58. In-situ growth of bamboo-like carbon nanotubes from Cu catalyst on continuous carbon fibre for interfacial enhancement10.1016/j.compscitech.2023.109933 ↗
59. One-step scheme in continuous carbon nanofilament–carbon fiber multi-scale reinforcement fabrication at ultra-low temperature with simultaneous tensile and interfacial improvement10.1016/j.cej.2023.147447 ↗
60. Constructing “nunchaku-like” multi-stage gradient interface via covalently grafting rigid-flexible-rigid structures onto carbon fibers: an effect strategy to improve interfacial properties of composites
61. Mussel-inspired ferric ion-polydopamine complex as a facile, green and efficient platform to functionalize carbon fiber for improving interfacial adhesion of composites