journal article·2018-09

Unique effect of carbon addition on development of deformation texture through changes in slip activation and twin deformation in heavily cold-rolled Fe-3% Si alloys

Masanori Takenaka, Noriki Fujita, Yasuyuki Hayakawa, Nobuhiro Tsuji

Acta Materialia· Volume 157
Publisher page

Abstract

The effect of carbon addition on the development of cold-rolling texture in heavily cold-rolled ultra-low carbon (ULC) 3% Si steel (<0.0005 mass% C-3.11 mass% Si) and low carbon (LC) 3% Si steel (0.016 mass% C-3.10 mass% Si) was investigated experimentally and theoretically. A higher carbon content in LC 3% Si steel led to the development of a {100}<011> cold-rolling texture compared with ULC 3% Si steel when the rolling reduction was 90%, which was the opposite tendency to that for conventional carbon steel without silicon content. According to slip bands observations at early stages of plastic deformation , carbon addition activated pencil-glide slip deformation on {110}, {112} and {123} slip planes and promoted deformation twinning, while only {110}<111> slip deformation was observed in ULC 3% Si steel. Crystal plasticity simulation implied that the combined effect of pencil-glide slips and twinning contributes significantly to the development of the {100}<011> cold-rolling texture in heavily cold-rolled LC 3% Si steel.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Magnetization of single crystal of Fe at high temperatures
2. Texture control in the production of grain oriented silicon steels10.2355/isijinternational.29.809 ↗
3. The role of grain boundary character distribution in secondary recrystallization of electrical steels10.1016/S1359-6454(96)00251-0 ↗
4. The improvement of primary texture for sharp Goss orientation on grain oriented silicon steels10.2355/isijinternational.43.736 ↗
5. Orientation dependence of secondary recrystallization in silicon-iron10.1016/S1359-6454(03)00193-9 ↗
6. Effects of niobium on textures in low carbon steel sheets10.2320/matertrans1960.14.489 ↗
7. Recrystallization of low-carbon titanium stabilized steel10.1007/BF03038376 ↗
8. Texture in deep drawing columbium (Nb)-treated interstitial-free steels10.1007/BF02642295 ↗
9. Investigation of structure and texture development during annealing of low-carbon steel10.1179/mst.1986.2.8.807 ↗
10. Development and control of annealing textures in low-carbon steels10.1179/imtr.1984.29.1.25 ↗
11. A study of recrystallization texture formation in cold rolled iron sheets with X-ray diffraction techniques
12. Nucleation of a {111} recrystallized grain at the grain boundary of cold rolled polycrystalline iron10.2320/matertrans1960.28.251 ↗
13. Recrystallization textures in iron resulting from nucleation at grain boundaries10.1016/0001-6160(89)90101-6 ↗
14. Deformation banding and recrystallization of α fibre components in heavily rolled IF steel10.1016/j.actamat.2004.05.017 ↗
15. Texture evolution in Si-alloyed ultra low-carbon steels after severe plastic deformation10.1002/adem.201000075 ↗
16. Recrystallized {311}<136> orientation in ferrite steels10.1016/j.scriptamat.2012.01.056 ↗
17. Conductivity and permeability of iron alloys
18. Studies of the propagation velocity of a ferromagnetic domain boundary10.1103/PhysRev.80.1090 ↗
19. Influence of carbon content on cold rolling and recrystallization texture in polycrystalline 3% Si-Fe
20. Determination of the orientation distribution function from pole figures in arbitrarily defined cells10.1002/pssb.2221340205 ↗
21. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
22. DAMASK: the Düsseldorf advanced material simulation kit for studying crystal plasticity using an FE based or a spectral numerical solver
23. A phase field model for damage in elasto-viscoplastic materials10.1016/j.cma.2016.05.006 ↗
24. Elasto-viscoplastic phase field modelling of anisotropic cleavage fracture10.1016/j.jmps.2016.10.012 ↗
25. An analysis of nonuniform and localized deformation in ductile single crystals10.1016/0001-6160(82)90005-0 ↗
26. Revealing the strain-hardening behavior of twinning-induced plasticity steels: theory, simulations, experiments10.1016/j.actamat.2012.09.064 ↗
27. A crystal plasticity model for twinning and transformation-induced plasticity10.1016/j.actamat.2016.07.032 ↗
28. Dislocation density distribution around an indent in single-crystalline nickel: comparing nonlocal crystal plasticity finite-element predictions with experiments10.1016/j.actamat.2014.03.012 ↗
29. Effects of temperature and strain rate on deformation twinning in Fe–Si Alloy10.2355/isijinternational.55.1496 ↗
30. Applying the grain orientation dependence of deformation twinning to improve the deformation properties of an Fe-6.5 wt%Si alloy10.1016/j.jallcom.2016.07.319 ↗
31. Effect of microstructure on the nucleation of deformation twins in polycrystalline high-purity magnesium: a multi-scale modeling study10.1016/j.jmps.2011.02.007 ↗
32. Modeling texture, twinning and hardening evolution during deformation of hexagonal materials10.1016/j.actamat.2006.11.017 ↗
33. A model for texture development dominated by deformation twinning: application to zirconium alloys10.1016/0956-7151(91)90083-D ↗
34. Incorporation of deformation twinning in crystal plasticity models10.1016/S0022-5096(97)00051-3 ↗
35. Prediction of crystallographic texture evolution and anisotropic stress–strain curves during large plastic strains in high purity a-titanium using a Taylor-type crystal plasticity model10.1016/j.actamat.2006.08.034 ↗
36. Simulation of rolling textures of b.c.c. metals considering grain interactions and crystallographic slip on {110}, {112} and {123} planes10.1016/0921-5093(94)09770-4 ↗
37. Investigation of contribution of {123} slip planes to development of rolling textures in bee metals by use of Taylor models10.1179/mst.1995.11.5.455 ↗
38. ABAQUS · 2014
39. Texture influence on the frequency of occurrence of CSL-boundaries in polycrystalline materials10.1016/0956-7151(93)90097-C ↗
40. Fundamental aspect of texture formation in low carbon steel10.2355/isijinternational.34.313 ↗
41. Strengthening the {111} texture in steel sheet by increasing the level of solute carbon during cold rolling10.1155/TSM.34.1 ↗
42. Deformation twinning in f.c.C. ACnd b.c.C. metals
43. Humphreys · 1995
44. Interrelationship between slip and twinning in B.C.C. crystals10.1016/0001-6160(75)90049-8 ↗
45. Orientation dependence of yield stress in 4.4% silicon iron single crystals10.1016/0001-6160(67)90392-6 ↗
46. Formation of cold-rolled texture and recrystallized texture in single crystals of 3% silicon iron (part I) -cold-rolled texture-10.2355/isijinternational1966.6.290 ↗
47. Investigation of slip system activity in iron at room temperature by SEM and AFM in-situ tensile and compression tests of iron single crystals10.1016/j.ijplas.2014.09.008 ↗
48. Crystal plasticity study on stress and strain partitioning in a measured 3D dual phase steel microstructure10.1134/S1029959917030079 ↗
49. An integrated crystal plasticity-phase field model for spatially resolved twin nucleation, propagation, and growth in hexagonal materials10.1016/j.ijplas.2018.03.009 ↗