Effect of fiber type on the ablation resistance of sharp leading-edge C/C-ZrB2-SiC composites: mesophase pitch carbon fibers vs. PAN-based fibers
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Materials design for hypersonics10.1038/s41467-024-46753-3 ↗
2. Rate effects in hypersonic flows10.1146/annurev-fluid-010518-040258 ↗
3. Ablation of advanced C/C-ZrC-SiC leading edge composites10.1016/j.corsci.2023.111648 ↗
4. Strength response investigation of defective C/C composite materials based on the Weibull mode10.1016/j.coco.2024.102021 ↗
5. In situ experimental study on damage evolution of the needled carbon/carbon composites under different loading types by high-resolution x-ray computed tomography10.1016/j.coco.2025.102318 ↗
6. Ultra-high temperature transverse and longitudinal compressive properties and failure mechanism of fine woven pierced C/C composites up to 2000°C10.1016/j.coco.2024.101823 ↗
7. Qualitative and quantitative evaluation of pre- and post-ablation carbon/carbon composites based on micro-computed tomography10.1016/j.coco.2025.102489 ↗
8. Cyclic ablation behavior of gradient C/C-Hf0.5Zr0.5C composites exposed to an oxyacetylene torch at a heat flux of 4.18 MW/m210.1016/j.jeurceramsoc.2025.117438 ↗
9. Materials design of silicon based ceramic coatings for high temperature oxidation protection
10. C/C-HfC-ZrC composites with excellent long-term ablation performance prepared by combining PIP and RMI10.1016/j.ceramint.2024.01.308 ↗
11. Ablation behavior of UHTCs carbide-modified C/C composites in extreme aerobic environments (3000°C): Evolution mechanisms of oxides film structure10.1016/j.corsci.2025.113036 ↗
12. Effect of temperature and loading mode on flexural properties and failure mechanisms of fine weave punctured C/C composites over 2000°C10.1016/j.coco.2024.102088 ↗
13. Effect of gaseous silicon infiltration process on mechanical and ablation properties of C/C-HfC-SiC composites with HfSi2/HfC coating prepared by reactive melt infiltration10.1016/j.coco.2025.102358 ↗
14. Heat dissipation of carbon shell in ZrC-SiC/TaC coating to improve protective ability against ultrahigh temperature ablation10.26599/JAC.2024.9220921 ↗
15. Thermal protection mechanism of UHTCs-modified C/C composites in high temperature gas scouring coupling environments
16. Research progress on ultra-high temperature ceramic structural materials for extreme environments10.15541/jim20250054 ↗
17. ZrC modified carbon/carbon composites using ZrSi and Zr-Cu alloys as reactive infiltrating materials: a comparative investigation10.1016/j.jallcom.2024.175515 ↗
18. Effect of the surface microstructure of SiC inner coating on the bonding strength and ablation resistance of ZrB2-SiC coating C/C composites10.1016/j.ceramint.2016.09.003 ↗
19. A ZrB2-SiC (Al) coating with improved oxidation resistance for C/C composites: design, experimental verification and oxidation mechanism10.1016/j.jeurceramsoc.2024.01.067 ↗
20. An integrated composite with a porous Cf/C-ZrB2-SiC core between two compact outer layers of Cf/C-ZrB2-SiC and Cf/C- SiC10.1016/j.jeurceramsoc.2014.10.005 ↗
21. Ablation behavior of laminated graphite/ZrB2-SiC ceramics in two different directions10.1016/j.ceramint.2018.05.238 ↗
22. Ablation behavior of sharp-sharp C/C-SiC-ZrB2 composites under oxyacetylene flame10.1016/j.jallcom.2017.04.188 ↗
23. Anti-ablation performance of plasma sprayed ZrB2/SiC coatings on C/C substrates and the influence of a chemical vapor deposited SiC interlayer
24. Response behavior and optimization strategy of UHTC-SiC dual-layer coatings under high heat flux ablation environments10.1111/jace.70030 ↗
25. Study on the ablation performance of SiC-coated high thermal conductivity three-dimensional C/C composites10.1016/j.jeurceramsoc.2023.12.079 ↗
26. Ablative property and mechanism of pitch-based carbon fiber modified C/C composites with high thermal conductivity10.1016/j.ceramint.2024.10.147 ↗
27. Enhanced thermal and structural performance of mesophase pitch-based C/C-SiC composites via pyrolytic graphite matrix modification10.1016/j.ceramint.2025.01.254 ↗
28. Characterization on axial thermal conductivity of carbon fiber and its influence factors
29. Tuning anisotropic thermal conductivity of unidirectional carbon/carbon composites by incorporating carbonaceous fillers10.1007/s10853-020-04357-4 ↗
30. Effects of high thermal conductivity chopped fibers on ablation behavior of pressureless sintered SiC–ZrC ceramics10.1016/j.ceramint.2023.06.149 ↗
31. Pitch-based ribbon-shaped carbon-fiber-reinforced one-dimensional carbon/carbon composites with ultrahigh thermal conductivity10.1016/j.carbon.2013.11.018 ↗
32. Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration10.1007/s40145-021-0512-z ↗
33. Fabrication and microstructure of ZrB2-ZrC-SiC coatings on C/C composites by reactive melt infiltration using ZrSi2 alloy10.1007/s40145-017-0257-x ↗
34. Effect of ablative angles on the ablation behaviors of ZrB2-SiC modified carbon/carbon composites10.1016/j.jallcom.2018.02.228 ↗
35. In-plane compressive properties and failure mechanisms of gradient Cf/ZrB2-SiC composites in high-temperature environment10.1016/j.coco.2024.101944 ↗
36. A multilayer SiC/ZrB2/SiC ablation resistance coating for carbon/carbon composites10.1002/adem.201800774 ↗
37. Ablation behaviour and mechanical performance of ZrB2-ZrC-SiC modified carbon-carbon composites prepared by vacuum infiltration combined with reactive melt infiltration10.1016/S1872-5805(24)60841-3 ↗
38. Plasma ablation behavior of C/C-(Hf1-xZrx) C composites prepared by precursor infiltration and pyrolysis10.1016/j.jallcom.2025.180733 ↗
39. Ablation resistance of C/C-Hf1-xZrxC composites under an oxyacetylene flame at above 2700 °C
40. Improved thermal shock resistance of SiCnw/PyC core- shell structure toughened CVD-SiC coating10.1016/j.jeurceramsoc.2018.02.017 ↗
41. High-density grafting of carbon nanotube/carbon nanofiber hybrid on carbon fiber surface by vacuum filtration for effective interfacial reinforcement of its epoxy composites10.1016/j.compscitech.2022.109522 ↗
42. Significantly increasing the interfacial adhesion of carbon fiber composites via constructing a synergistic hydrogen bonding network by vacuum filtration
43. Enhanced thermal and structural performance of mesophase pitch-based C/C-SiC composites via pyrolytic graphite matrix modification10.1016/j.ceramint.2025.01.254 ↗
44. Mesophase pitch-based graphite fiber-reinforced acrylonitrile butadiene styrene resin composites with high thermal conductivity10.1016/j.carbon.2015.09.019 ↗
45. The effect of microstructural evolution on micromechanical behavior of pyrolytic carbon after heat treatment10.1016/j.diamond.2020.107729 ↗
46. Effect of heat treatment on cracking and strength of carbon/carbon composites with smooth laminar pyrocarbon matrix10.1016/j.matdes.2016.06.017 ↗
47. Boron quantum dot powered anthracite-derived carbon anode achieving enhanced reaction kinetics and superior sodium storage capability10.1039/D4QM00981A ↗
48. Development of graphitic and non-graphitic carbons using different grade biopitch sources10.1016/j.carbon.2024.119770 ↗
49. Effect of heat flux on ablation behaviour and mechanism of C/C-ZrB2-SiC composite under oxyacetylene torch flame10.1016/j.corsci.2013.04.052 ↗
50. Microstructure and ablation mechanism of C/C-ZrC-SiC composites in a plasma flame10.1016/j.ceramint.2017.04.089 ↗