journal article·2020-05Open access

Tantalum and zirconium induced structural transitions at complex [111] tilt grain boundaries in copper

T. Meiners, J.M. Duarte, G. Richter, G. Dehm, C.H. Liebscher

Acta Materialia· Volume 190

Abstract

Alloying nanocrystalline copper (Cu) with immiscible elements, such as tantalum (Ta) and zirconium (Zr), is a promising technique to manipulate grain boundary properties and by this suppress grain growth at elevated temperatures. However, insights on the atomistic origins on the influence of impurity elements on grain boundaries are lacking. In this study, the atomistic effects of Ta and Zr on [111] tilt grain boundaries in Cu are investigated by high resolution scanning transmission electron microscopy techniques. In case of Ta, the formation of spherical, nano-scale precipitates in close vicinity to the grain boundaries is observed, but no sign of segregation. The particles induce a repelling force to migrating boundaries and act as local pinning points. The segregation of Zr is observed to occur either at confined grain boundary steps or homogeneously along the boundaries without steps. In both cases a strong disordering of the defect or grain boundary structure is revealed. Furthermore, at low Zr concentrations it induces structural grain boundary transitions and partial atomic reordering of the grain boundary structural units.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Ion-surface interactions and analysis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. On the structure of tilt grain boundaries in cubic metals I. Symmetrical tilt boundaries10.1098/rsta.1983.0020 ↗
2. Grain Boundary Segregation in Metals
3. Grain Boundaries
4. Sulfur induced embrittlement in high-purity, polycrystalline copper10.1016/j.actamat.2018.06.013 ↗
5. Temperature dependent transition of intragranular plastic to intergranular brittle failure in electrodeposited Cu micro-tensile samples10.1016/j.msea.2014.09.029 ↗
6. H.J. Frost, M.F. Ashby, F.A. Spaepen, A catalogue of [100],[110], and [111] symmetric tilt boundaries in face-centered cubic hard sphere crystals.(1982).
7. A computer simulation study of [001] and [111] tilt boundaries: the multiplicity of structures10.1016/0001-6160(84)90013-0 ↗
8. Grain boundary excess free volumedirect thermodynamic measurement10.1007/s10853-006-0563-0 ↗
9. Bismuth-induced embrittlement of copper grain boundaries10.1038/nmat1191 ↗
10. Effect of interface phase transformations on diffusion and segregation in high-angle grain boundaries10.1103/PhysRevLett.110.255502 ↗
11. Predicting phase behavior of grain boundaries with evolutionary search and machine learning
12. On the structure of tilt grain boundaries in cubic metals II. Asymmetrical tilt boundaries
13. Free energy of grain boundary phases: atomistic calculations for $\Sigma$5(310)[001] grain boundary in Cu
14. Phase transformations at interfaces: observations from atomistic modeling10.1016/j.cossms.2016.05.003 ↗
15. Structural phase transformations in metallic grain boundaries10.1038/ncomms2919 ↗
16. A coincidence edge dislocation description of grain boundaries10.1016/0036-9748(68)90085-9 ↗
17. Structure and energetics of long-period tilt grain boundaries using an effective Hamiltonian10.1103/PhysRevB.63.214105 ↗
18. [110] symmetric tilt grain-boundary structures in FCC metals with low stacking-fault energies10.1103/PhysRevB.54.6999 ↗
19. The grain-boundary structural unit model redux10.1016/j.actamat.2017.05.002 ↗
20. Grain boundary and interface structures in ceramics10.2109/jcersj.109.1271_S110 ↗
21. Grain boundary and high-temperature strength in SiC
22. Correlating atom probe tomography with atomic-resolved scanning transmission electron microscopy: example of segregation at silicon grain boundaries10.1017/S1431927617000034 ↗
23. Defect character at grain boundary facet junctions: analysis of an asymmetric Sigma 5 grain boundary in fe10.1016/j.actamat.2016.11.017 ↗
24. Segregation-induced nanofaceting transition at an asymmetric tilt grain boundary in copper10.1103/PhysRevLett.121.255502 ↗
25. Segregation-induced ordered superstructures at general grain boundaries in a nickel-bismuth alloy10.1126/science.aam8256 ↗
26. Complexion: a new concept for kinetic engineering in materials science10.1016/j.actamat.2007.07.029 ↗
27. Identification of a bilayer grain boundary complexion in Bi-doped Cu10.1016/j.scriptamat.2012.10.012 ↗
28. Grain boundary complexions10.1016/j.actamat.2013.07.037 ↗
29. Multiple grain boundary transitions in ceramics: acase study of alumina10.1016/j.actamat.2007.04.051 ↗
30. Design of stable nanocrystalline alloys10.1126/science.1224737 ↗
31. Stability criteria for nanocrystalline alloys10.1016/j.actamat.2017.03.029 ↗
32. Mechanical properties of nanocrystalline copper and nickel10.1179/026708304225010460 ↗
33. Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility10.1038/ncomms10802 ↗
34. Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility10.1038/ncomms10802 ↗
35. Electronic structure of metastable bcc CuCr alloy thin films: comparison of electron energy-loss spectroscopy and first-principles calculations10.1016/j.ultramic.2016.07.011 ↗
36. A maximum in the strength of nanocrystalline copper10.1126/science.1086636 ↗
37. Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel10.1016/S1359-6454(03)00365-3 ↗
38. Processing and microhardness of bulk Cu-Fe nanocomposites10.1016/0965-9773(96)00003-7 ↗
39. Mechanical behavior of nanocrystalline copper10.1016/j.msea.2006.07.165 ↗
40. Tailoring stacking fault energy for high ductility and high strength in ultrafine grained Cu and its alloy10.1063/1.2356310 ↗
42. Five decades of the zener equation10.2355/isijinternational.38.913 ↗
43. Thermal stability of nanocrystalline FeZr alloys10.1016/j.msea.2010.02.043 ↗
44. Grain size stabilization of nanocrystalline copper at high temperatures by alloying with tantalum10.1016/j.jallcom.2013.03.177 ↗
45. US Army Research Laboratory Lightweight and Specialty Metals Branch Research and Development (FY14)
46. Stabilization and strengthening of nanocrystalline copper by alloying with tantalum10.1016/j.actamat.2012.01.011 ↗
47. Structure of vacuum CuTa condensates10.1134/S0031918X17020156 ↗
48. Microstructure and mechanical properties of sputter-deposited Cu 1- x Ta x alloys10.1007/s11661-997-0222-3 ↗
49. The CuTa (Copper-Tantalum) system
50. Extreme creep resistance in a microstructurally stable nanocrystalline alloy10.1038/nature19313 ↗
51. Cu-Zr (Copper-Zirconium)10.1007/BF02898260 ↗
52. Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility10.1038/ncomms10802 ↗
53. The stabilization of nanocrystalline copper by zirconium10.1016/j.msea.2012.08.092 ↗
54. Growth and structure of copper thin films deposited on (0001) sapphire by molecular beam epitaxy10.1080/01418639508241899 ↗
55. TEM sample preparation and FIB-induced damage10.1557/mrs2007.63 ↗
56. An improved FIB sample preparation technique for site-specific plan-view specimens: a new cutting geometry10.1016/j.ultramic.2017.09.011 ↗
57. Negative spherical aberration ultrahigh-resolution imaging in corrected transmission electron microscopy10.1098/rsta.2009.0134 ↗
58. Absolute atomic-scale measurements of the Gibbsian interfacial excess of solute at internal interfaces10.1103/PhysRevB.48.6724 ↗
59. A quantitative atom probe study of the Nb excess at prior austenite grain boundaries in a nb microalloyed strip-cast steel10.1016/j.actamat.2012.06.013 ↗
60. Hard sphere models for the structure of grain boundaries
61. The impurity-drag effect in grain boundary motion10.1016/0001-6160(62)90092-5 ↗
62. Zener pinning of grain boundaries and structural stability of immiscible alloys10.1007/s11837-016-1899-9 ↗
63. Zener pinning of grain boundaries and structural stability of immiscible alloys10.1007/s11837-016-1899-9 ↗
64. Atomistic modeling of capillary-driven grain boundary motion in Cu-Ta alloys10.1016/j.actamat.2018.01.027 ↗
65. Materials selection rules for amorphous complexion formation in binary metallic alloys10.1016/j.actamat.2017.08.042 ↗
66. Effect of grain boundary character on segregation-induced structural transitions10.1103/PhysRevB.93.134113 ↗
67. Effects of grain boundary disorder on dislocation emission10.1016/j.matlet.2018.11.114 ↗
68. Strain-induced asymmetric line segregation at faceted Si grain boundaries10.1103/PhysRevLett.121.015702 ↗