Polarization rotation in copper doped zinc oxide (ZnO:Cu) thin films studied by Piezoresponse Force Microscopy (PFM) techniques

Abstract In this study, the polarization rotation with approximately 180⁰, i.e., the phenomenon that polarization changes its angle by ∼180°, in copper doped ZnO (ZnO:Cu) films under an applied electrical field are characterized by using Piezoresponse Force Microscopy (PFM) based techniques. First, the Band Excitation PFM (BE-PFM) measurements show that the polarizations in ZnO:Cu sample prefer the upward direction when the copper concentration is higher (above 8 at.%). Second, it is found that the piezoresponse property is enhanced with increasing the copper concentration. Third, by conducting PFM in spectroscopy mode (PFS), it reveals that the anomalous hysteresis loops occurs at certain locations and can be tuned to symmetry by increasing the bias window. Furthermore, it is found the built-in field during the DC poling processes are contributed by the oxygen vacancy in the films. The PFS results from as-grown sample and samples annealed in air and vacuum also verify that the oxygen vacancy plays an important role in the polarization rotation. Finally, by using the switching spectroscopy PFM (SS-PFM) technique, it is confirmed that the local polarization rotation is mediated by copper concentration. The parameters determined from the PFS measurements, including positive and negative coercive bias, V p and V n , coercive bias, E c , maximum and remanent switchable responses, R s and R 0 , all increase with the copper concentration.