journal article·2023-03

Eutectic, precipitation-strengthened alloy via laser fusion of blends of Al-7Ce-10Mg (wt.%), Zr, and Sc powders

Clement N. Ekaputra, David Weiss, Jon-Erik Mogonye, David C. Dunand

Acta Materialia· Volume 246
Publisher page

Abstract

Laser powder-bed fusion was used to create an Al-7Ce-10Mg-0.71Zr-0.23Sc (wt.%) alloy, using hypoeutectic Al-7Ce-10Mg (wt.%) pre-alloyed powder blended with either elemental Zr and Sc powders (∼20 µm in size), or pre-alloyed, concentrated Al-10Zr and Al-10Sc (wt.%) powders (comprised of 1-5 µm Al 3Zr or Al 3 Sc particles embedded in a <45 μm Al-rich matrix). The effects of process parameters and powder selection on the homogeneity of the as-fabricated microstructure were investigated via metallography and compared to predictions from a simple numerical model describing the dissolution of Zr powders in the melt pool during printing. Both experiments and model show that decreasing scan speed leads to greater dissolution of Zr and Sc, but remelting has no significant effect. The samples produced with Al-10Zr and Al-10Sc powder additions show greater amounts of Zr and Sc dissolution than those produced with elemental Zr and Sc additions, because of the smaller size (5 µm for prealloyed vs. 20 µm for elemental) and lower melting point (1580 and 1320°C for Al 3Zr, Al 3 Sc vs. 1850 and 1541°C for Zr, Sc) of the dissolving species. The alloys fabricated with prealloyed powders display larger amounts of very fine grains (1-2 µm) nucleated by primary L1 2 Al 3(Zr,Sc) precipitates, and a clear hardening response during aging, consistent with supersaturated Zr and Sc forming a high number density of secondary L1 2 Al 3(Zr,Sc) nanoprecipitates.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
2. Challenges in additive manufacturing of high-strength aluminium alloys and current developments in hybrid additive manufacturing
3. New aluminum alloys specifically designed for laser powder bed fusion: a review10.3390/ma12071007 ↗
4. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
5. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
6. Research trends in laser powder bed fusion of Al alloys within the last decade
7. Progress in additive manufacturing on new materials: a review10.1016/j.jmst.2018.09.002 ↗
8. Fusion-based additive manufacturing for processing aluminum alloys: state-of-the-art and challenges10.1002/adem.201700003 ↗
9. Towards high-temperature applications of aluminium alloys enabled by additive manufacturing
10. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties10.1016/j.pmatsci.2015.03.002 ↗
11. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends10.1016/j.jmst.2018.09.004 ↗
12. Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property10.1007/s10853-020-05037-z ↗
13. A criterion for cracking during solidification10.1016/j.actamat.2015.01.034 ↗
14. Kou · 2002
15. Evaluation of an Al-Ce alloy for laser additive manufacturing10.1016/j.actamat.2016.12.065 ↗
16. Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting10.1016/j.actamat.2018.04.053 ↗
17. Elimination of extraordinarily high cracking susceptibility of aluminum alloy fabricated by laser powder bed fusion10.1016/j.jmst.2021.06.023 ↗
18. Selective laser melting of a high strength Al Mn Sc alloy: alloy design and strengthening mechanisms10.1016/j.actamat.2019.04.014 ↗
19. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
20. Development of Al-Ti-based alloys for laser powder bed fusion
21. SLM-processed Sc- and Zr- modified Al-Mg alloy: mechanical properties and microstructural effects of heat treatment10.1016/j.msea.2017.06.089 ↗
22. Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting10.1016/j.jallcom.2019.01.327 ↗
23. A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles
24. Sustainability through alloy design: challenges and opportunities10.1016/j.pmatsci.2020.100722 ↗
25. Criteria for developing castable, creep-resistant aluminum-based alloys - a review10.3139/146.101249 ↗
26. Cerium in aluminum alloys10.1007/s10853-019-03892-z ↗
27. Cerium-based, intermetallic-strengthened aluminum casting alloy: high-volume co-product development10.1007/s11837-016-1943-9 ↗
28. High performance aluminum–cerium alloys for high-temperature applications10.1039/C7MH00391A ↗
29. Weiss · 2018 · 47
30. Mondolfo · 1976
31. Thermal stability of Al/Al11Ce3and Al/Al11La3/Al3Ni eutectics obtained by Bridgman growth10.1179/026708399101506346 ↗
32. Cast near-eutectic Al-12. wt.% Ce alloy with high coarsening and creep resistance10.1016/j.msea.2019.138440 ↗
33. Comparing evolution of precipitates and strength upon aging of cast and laser-remelted Al-8Ce-0.2Sc-0.1Zr (wt.%)10.1016/j.msea.2022.142990 ↗
34. Solidification microstructure, aging evolution, and creep resistance of laser powder-bed fused Al-7Ce-8Mg (wt.%)
35. Microstructure and properties of additively manufactured Al-Ce-Mg alloys10.1038/s41598-021-86370-4 ↗
36. High strength aluminum-cerium alloy processed by laser powder bed fusion
37. Enhanced thermal coarsening resistance in a nanostructured aluminum-cerium alloy produced by additive manufacturing10.1016/j.matdes.2021.109988 ↗
38. Al-Cu-Ce(-Zr) alloys with an exceptional combination of additive processability and mechanical properties
39. Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy10.1016/j.actamat.2021.117285 ↗
40. Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing10.1016/j.actamat.2020.07.014 ↗
41. A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy10.1016/j.actamat.2022.117699 ↗
42. Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting10.1016/j.matdes.2016.11.040 ↗
43. Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting10.1016/j.cirp.2016.04.057 ↗
44. Coarsening- and creep resistance of precipitation-strengthened Al–Mg–Zr alloys processed by selective laser melting10.1016/j.actamat.2020.02.008 ↗
45. Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy10.1016/j.matchar.2018.03.033 ↗
46. Characterisation of the multiple effects of Sc/Zr elements in selective laser melted Al alloy10.1016/j.matchar.2021.111653 ↗
47. Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion10.1016/j.matdes.2022.110779 ↗
48. Superior mechanical properties of a selective-laser-melted AlZnMgCuScZr alloy enabled by a tunable hierarchical microstructure and dual-nanoprecipitation10.1016/j.mattod.2021.11.019 ↗
49. Understanding grain refinement of Sc addition in a Zr containing Al-Zn-Mg-Cu aluminum alloy from experiments and first-principles10.1016/j.intermet.2020.106823 ↗
50. Design approaches for printability-performance synergy in Al alloys for laser-powder bed additive manufacturing10.1016/j.matdes.2021.109640 ↗
51. De Luca · 2018 · 1589
52. Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content10.1016/j.actamat.2017.10.040 ↗
53. Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures10.1016/S1359-6454(03)00320-3 ↗
54. Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys10.1016/S1359-6454(02)00201-X ↗
55. Melt pool temperature and cooling rates in laser powder bed fusion
56. Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends
57. Emerging metallic systems for additive manufacturing: in-situ alloying and multi-metal processing in laser powder bed fusion10.1016/j.pmatsci.2021.100795 ↗
58. In-situ alloying in laser-based additive manufacturing processes: a critical review10.1016/j.jallcom.2021.159567 ↗
59. Operando X-ray diffraction study of thermal and phase evolution during laser powder bed fusion of Al-Sc-Zr elemental powder blends
60. Al-Zr (aluminum-zirconium)10.1361/105497102770331497 ↗
61. J.L. Murray, The Al-Sc (Aluminum-Scandium) system, (1998) 380-384.10.1361/105497198770342120 ↗
62. The grain refinement mechanism of cast aluminium by zirconium10.1016/j.actamat.2013.05.044 ↗
63. Intermetallics in the Zr–Al diffusion zone10.1016/j.intermet.2003.09.002 ↗
64. Combustion synthesis of Zr-Al intermetallic compounds10.1016/S0925-8388(96)02587-X ↗
65. First-principles calculation of structural energetics of Al–TM (TM=Ti, Zr, Hf) intermetallics10.1016/j.actamat.2005.03.028 ↗
66. Laser powder-bed fusion as an alloy development tool: parameter selection for in-situ alloying using elemental powders10.3390/ma13183922 ↗
67. Remelt processing and microstructure of selective laser melted Ti25Ta10.1016/j.jallcom.2019.153082 ↗
68. The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts10.1108/13552541111156450 ↗
69. Metal powder absorptivity: modeling and experiment10.1364/AO.55.006496 ↗
70. Microstructural evolution and characterization of AlSi10Mg alloy manufactured by selective laser melting10.1016/j.jmrt.2022.01.129 ↗
71. Microstructure and strength of selectively laser melted AlSi10Mg10.1016/j.actamat.2016.07.012 ↗
72. Microstructure of selective laser melted AlSi10Mg alloy10.1016/j.matdes.2019.107677 ↗
73. Multi-scale modeling of electron beam melting of functionally graded materials10.1016/j.actamat.2016.06.022 ↗
74. Multiphase mesoscopic simulation of multiple and functionally gradient materials laser powder bed fusion additive manufacturing processes
75. Critical evaluation of experimental data of solution enthalpy of zirconium in liquid aluminum10.1016/j.jct.2018.08.010 ↗
76. Cao · 2015 · 190
77. Effects of composition on atomic structure, diffusivity, and viscosity of liquid Al-Zr Alloys10.1007/s11661-011-1054-8 ↗
78. Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and for flow in packed beds and tube bundles10.1002/aic.690180219 ↗
79. Thermal behavior in single track during selective laser melting of AlSi10Mg powder10.1007/s00339-017-1194-9 ↗
80. T.L. Bergman, A.S. Lavine, F.P. Incropera, Dewitt, David P., Fundamentals of Heat and Mass Transfer, 7th ed., John Wiley & Sons2011.
81. In-situ full-field mapping of melt flow dynamics in laser metal additive manufacturing
82. Thermal conductivity of zirconium10.1016/0022-3115(95)00110-7 ↗
83. Development of an interatomic potential for the simulation of phase transformations in zirconium10.1080/09500830701191393 ↗
84. Mathematical theory of heat distribution during heating and cutting
85. Universal scaling laws of keyhole stability and porosity in 3D printing of metals10.1038/s41467-021-22704-0 ↗
86. Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy10.1016/j.scriptamat.2017.02.036 ↗
87. In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing10.1016/j.apmt.2017.08.006 ↗
88. Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis10.1016/j.matdes.2018.01.022 ↗
89. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
90. Simulation of melt pool behaviour during additive manufacturing: underlying physics and progress