Warm ductility enhanced by austenite reversion in ultrafine-grained duplex steel
Source abstract
Abstract
Abstract The current work investigated the relationship between microstructure and warm deformation properties in a strong but ductile Mn-rich steel. A cold-rolled Fe-11.3Mn-0.068C-0.3Si-1.1Al-0.25Mo-0.01P-0.01S-0.0003N (in wt. %) steel was deformed isothermally after inter-critical annealing at temperatures from 550 °C to 720 °C. Deformation at 650 °C led to exceptional ductility, corresponding to total elongation of over 100%. The microstructure was characterized by electron backscattered diffraction, transmission Kikuchi diffraction, and transmission electron microscopy. It was found that the rate of austenite reversion can be accelerated by deformation, and that the transformation makes strained austenite into equiaxed grains. Exceptional ductility can be achieved when warm deformation is accompanied by austenite reversion. This research will provide metallurgical principles for warm deformation of steel under reversed transformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Driving force and logic of development of advanced high strength steels for automotive applications10.1002/srin.201200288 ↗
2. High dislocation density–induced large ductility in deformed and partitioned steels10.1126/science.aan0177 ↗
3. Ultrahigh ductility, high-carbon martensitic steel10.1007/s11661-016-3651-z ↗
4. Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation10.1016/j.cossms.2004.09.003 ↗
5. Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel10.1016/j.actamat.2011.03.025 ↗
6. Medium-alloy manganese-rich transformation-induced plasticity steels10.1007/s11661-012-1402-3 ↗
7. Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: a pathway to ductile martensite10.1016/j.actamat.2013.06.055 ↗
8. Nanoscale austenite reversion through partitioning, segregation and kinetic freezing: example of a ductile 2 GPa Fe-Cr-C steel10.1016/j.actamat.2012.01.045 ↗
9. Role of stress-assisted martensite in the design of strong ultrafine-grained duplex steels10.1016/j.actamat.2014.09.017 ↗
10. Brittle intermetallic compound makes ultrastrong low-density steel with large ductility10.1038/nature14144 ↗
11. Experimental investigation of hot stamping of ultra high strength steel10.1002/srin.201300246 ↗
12. A review of the physical metallurgy related to the hot press forming of advanced high strength steel
13. Warm and hot stamping of ultra high tensile strength steel sheets using resistance heating10.1016/S0007-8506(07)60085-7 ↗
14. Hole expansion characteristics of ultra high strength steels10.1016/j.proeng.2014.10.066 ↗
15. Springback of high-strength steel after hot and warm sheet formings10.1016/S0007-8506(07)60086-9 ↗
16. Investigation of the thermo-mechanical properties of hot stamping steels10.1016/j.jmatprotec.2006.03.233 ↗
17. A review on hot stamping10.1016/j.jmatprotec.2010.07.019 ↗
18. Funakawa Yoshimasa · 2013
19. Hot ductility behaviour of high-Mn TWIP steels10.1016/j.msea.2010.11.030 ↗
20. Hot ductility behavior of boron microalloyed steels10.1016/j.msea.2007.01.098 ↗
21. High temperature tensile deformation behavior of Grade 92 steel10.1016/j.jnucmat.2014.06.033 ↗
22. Tensile properties of martensitic stainless steels at elevated temperatures10.1361/10599490523373 ↗
23. High-strain-rate deformation: mechanical behavior and deformation substructures induced10.1146/annurev-matsci-070511-155034 ↗
24. Influence of dynamic recrystallisation on the tensile ductility of steels in the temperature range 700 to 1150°C10.2355/isijinternational.32.241 ↗
25. Influence of deformation induced ferrite, grain boundary sliding, and dynamic recrystallisation on hot ductility of 0·1–0·75%C steels10.1179/mst.1993.9.10.907 ↗
26. Influence of strain rate on production of deformation induced ferrite and hot ductility of steels10.1179/mst.1994.10.8.721 ↗
27. Hot working characteristics of steels in austenitic state10.1016/0924-0136(95)01987-P ↗
28. Hot ductility of an austenitic and a ferritic stainless steel10.1179/mst.1997.13.3.243 ↗
29. Hot ductility curve of an austenitic stainless steel and importance of dynamic recrystallisation in determining ductility recovery at high temperatures10.1179/026708399101505086 ↗
30. Recovery and recrystallization during high temperature deformation of α-iron10.1007/BF02643086 ↗
31. Dynamic recrystallization of ferrite in interstitial free steel10.1016/S1359-6462(97)00123-1 ↗
32. Dynamic recrystallization of ferrite during warm deformation of ultrafine grained ultra-low carbon steel10.1016/j.scriptamat.2005.05.027 ↗
33. Seventy-five years of superplasticity: historic developments and new opportunities10.1007/s10853-009-3780-5 ↗
34. Low temperature superplasticity and thermal stability of a nanostructured low-carbon microalloyed steel10.1038/srep18656 ↗
35. Microstructural change during superplastic deformation of δ-ferrite austenite duplex stainless steel
36. High strain rate superplasticity and roleof dynamic recrysstallization in a superplasticity duplex SS10.2320/matertrans1989.31.983 ↗
37. Superplasticity in Ti–6Al–4V: characterisation, modelling and applications10.1016/j.actamat.2015.04.056 ↗
38. Optimal chemical composition in Fe-Cr-Ni alloys for ultra grain refining by reversion from deformation induced martensite10.2355/isijinternational.31.721 ↗
39. Atom probe tomography of metallic nanostructures10.1557/mrs.2015.314 ↗
40. Characterizing deformed ultrafine-grained and nanocrystalline materials using transmission Kikuchi diffraction in a scanning electron microscope10.1016/j.actamat.2013.09.026 ↗
41. Effect of gauge length in superplastic tensile tests10.1179/174328408X323113 ↗
42. Accurate measurement of the orientation relationship of lath martensite and bainite by electron backscatter diffraction analysis10.1016/j.scriptamat.2009.02.053 ↗
43. Mn partitioning during the intercritical annealing of ultrafine-grained 6% Mn transformation-induced plasticity steel10.1016/j.scriptamat.2010.12.012 ↗
44. Superplasticity in a lean Fe-Mn-Al steel10.1038/s41467-017-00814-y ↗
45. Dynamic reverse phase transformation induced high-strain-rate superplasticity in low carbon low alloy steels with commercial potential10.1038/s41598-017-09493-7 ↗
46. Humphreys · 2012
47. Evolution of microstructure and texture during hot deformation of a commercially processed Supral10010.1016/S1005-0302(12)60093-0 ↗
48. High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy10.1016/j.msea.2016.10.095 ↗
49. Isotropic superplastic flow in textured magnesium alloy10.1016/j.msea.2012.08.070 ↗
50. Superplastic deformation mechanisms of high Nb containing TiAl alloy with (α2 + γ) microstructure10.1016/j.intermet.2016.06.003 ↗
51. Mechanisms for enhanced plasticity in magnesium alloys10.1016/j.actamat.2014.09.006 ↗
52. Low temperature superplastic-like deformation and fracture behavior of nano/ultrafine-grained metastable austenitic stainless steel10.1016/j.matdes.2016.12.086 ↗
53. Modelling of flow stress of dual phase steel under warm tensile deformation10.1179/026708310X12635619988140 ↗
54. Flow stress behavior of 2205 duplex stainless steel during warm tensile10.4028/www.scientific.net/AMR.538-541.1605 ↗
55. Mechanical behavior of superplastic ultrahigh carbon steels at elevated temperature
56. Superior superplastic behavior in fine-grained Ti–6Al–4V sheet10.1016/S0925-8388(02)00406-1 ↗
57. Superplasticity in an Ni3Al base alloy with 8wt% Cr10.1007/BF00587664 ↗
58. Superplasticity in a tool steel10.1179/030716981803275965 ↗
59. Tensile properties of an AlCrCuNiFeCo high-entropy alloy in as-cast and wrought conditions10.1016/j.msea.2011.11.045 ↗
60. Flow stress behavior of commercial pure titanium sheet during warm tensile deformation10.1016/j.matdes.2011.07.060 ↗
61. Influence of microstructure on the flow behavior of duplex stainless steels at high temperatures
62. On the mechanisms of superplasticity in Ti–6Al–4V10.1016/j.actamat.2015.12.003 ↗