Fracture mechanisms in flat and cylindrical tensile specimens of TRIP-TWIP β -metastable Ti-12Mo alloy
Source abstract
Abstract
Enhanced mechanical properties in terms of strain hardening capacity and uniform strain have been measured for recently developed TRIP-TWIP β − metastable Ti alloys. However, hardly anything has been reported about their fracture properties. An original fracture scenario including adiabatic shear banding is proposed for both flat and cylindrical tensile specimens of Ti-12wt.% Mo tested in quasi-static conditions at room temperature. The geometry of the tensile specimens has a strong influence on the fracture mechanism. The fusible coating method was used with Sn and Cu coatings to qualitatively evaluate the evolution of the temperature during fracture, colder than 232°C during crack initiation and increasing up to the melting temperature of the alloy during crack propagation. High-speed imaging was also used to estimate the evolution of the crack propagation speed, increasing up to 1,840 m . s − 1 , a level corresponding to unstable crack propagation. The evolution of the temperature rise and of the crack speed is linked to the specific fracture patterns.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. High-strength nanostructured Ti-12Mo alloy from ductile metastable beta state precursor10.1016/j.msea.2010.03.044 ↗
2. On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects10.1016/j.scriptamat.2012.01.049 ↗
3. Investigation of early stage deformation mechanisms in a metastable beta titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
4. The role of stress induced martensite in ductile metastable Beta Ti-alloys showing combined TRIP/TWIP Effects, Mater
5. Marteleur · 2016
6. Microstructural evolution of a ductile metastable β titanium alloy with combined TRIP/TWIP effects10.1016/j.jallcom.2016.12.394 ↗
7. Fabrication and characterization of a novel β metastable Ti-Mo-Zr alloy with large ductility and improved yield strength10.1016/j.matchar.2018.03.031 ↗
8. A new titanium alloy with a combination of high strength, high strain hardening and improved ductility10.1016/j.scriptamat.2014.09.005 ↗
9. On the heterogeneous nature of deformation in a strain-transformable beta metastable Ti-V-Cr-Al alloy10.1016/j.actamat.2018.10.003 ↗
10. On localization and void coalescence as a precursor to ductile fracture10.1098/rsta.2014.0121 ↗
11. Lütjering · 2003
12. High temperature rise dominated cracking mechanisms in ultra-ductile and tough titanium alloy10.1038/s41467-020-15772-1 ↗
13. The mechanism of fracture in glassy materials capable of some inelastic deformation10.1016/0025-5416(76)90198-1 ↗
14. Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti3 bulk metallic glass10.1016/S1359-6454(02)00521-9 ↗
15. Tensile fracture morphologies of bulk metallic glass10.1063/1.3487968 ↗
16. The fracture topography of metallic glasses10.1007/BF00761791 ↗
17. Fracture behavior of Zr55Cu30Al10Ni5 bulk metallic glass under quasi-static and dynamic compression10.1557/JMR.2008.0217 ↗
18. Adiabatic shear bands in titanium and titanium alloys: a critical review10.1016/0261-3069(93)90078-A ↗
19. On the Adiabatic Shear of Ti-6A1-4V Ballistic Targets10.1016/0025-5416(83)90044-7 ↗
20. Adiabatic Shear Localization in Titanium and Ti-6 Pct AI-4 Pct V Alloy10.1007/BF02814827 ↗
21. The Instability of Plastic Flow of Metals at Very Low Temperatures
22. Tensile testing of ultra fine grained metals10.1016/j.msea.2006.02.016 ↗
23. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
24. Temperature rise at shear bands in metallic glasses10.1038/nmat1536 ↗
25. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
26. Digital Image Correlation Analysis and Numerical Simulation of Aluminum Alloys under Quasi-static Tension after Necking Using the Bridgman's Correction Method10.1007/s40799-016-0140-7 ↗
27. Determining material true stress-strain curve from tensile specimens with rectangular cross-section10.1016/S0020-7683(98)00153-X ↗
28. Procedure for the determination of true stress-strain curves from tensile tests with rectangular cross-section specimens10.1115/1.1633573 ↗
29. Study on true stress correction from tensile tests10.1007/s12206-008-0302-3 ↗
30. Uniaxial True Stress-Strain after Necking
31. Determination of anisotropy and material hardening for aluminum sheet metal10.1016/j.ijsolstr.2012.01.011 ↗
32. Necking in tensile bars with rectangular cross-section10.1016/0045-7825(93)90049-4 ↗
33. A Simplified Procedure to Determine Post-necking True Stress–Strain Curve from Uniaxial Tensile Test of Round Metallic Specimen Using DIC10.1007/s11665-018-3566-5 ↗
34. G.F. Pittinato, A. Philips, V. Kerlin, M.A. Russo, SEM/TEM Fractography Handbook, Metals and Ceramics information center columbus OH, 1975.
35. Reverse-ballistic impact study of shear plug formation and displacement in Ti6Al4V alloy10.1063/1.354053 ↗
36. Flow Instabilities and fracture in Ti-6Al-4V deformed in compression at 298 K to 673 K10.1007/BF02652318 ↗
37. An investigation of unusual surface features caused by adiabatic shear during tensile separation10.1016/0036-9748(87)90354-1 ↗
38. The effect of microstructure on localized melting at separation in Ti-6Al-4V tensile samples10.1007/BF02647309 ↗
39. Observations on the effect of temperature rise at fracture in two titanium alloys10.1016/0025-5416(86)90356-3 ↗
40. Localized melting at separation of AISI 4340 steel tensile samples10.1016/0921-5093(91)90759-G ↗
41. Analysis of the dynamic propagation of adiabatic shear bands10.1016/S0020-7683(02)00244-5 ↗
42. Dynamically propagating shear bands in impact-loaded prenotched plates - I. Experimental investigations of temperature signatures and propagation speed10.1016/0022-5096(96)00003-8 ↗
43. Dynamic shear bands: An investigation using high speed optical and infrared diagnostics10.1016/S0167-6636(01)00051-5 ↗
44. On the growth of shear bands and failure-mode transition in prenotched plates: A comparison of singly and doubly notched specimens10.1016/S0749-6419(98)00003-5 ↗
45. An experimental study of the formation process of adiabatic shear bands in a structural steel10.1016/0022-5096(88)90012-9 ↗
46. Dynamically Propagating Shear Bands in impact-loaded prenotched plates - II. Numerical simulations10.1016/0022-5096(96)00004-X ↗
47. Mesh-free Galerkin simulations of dynamic shear band propagation and failure mode transition10.1016/S0020-7683(01)00188-3 ↗
48. Initiation and propagation of shear band in antiplane shear deformation
49. Ductile fracture in metals10.1080/14786435908238272 ↗
50. Failure of metals I: Brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
51. Achieving Gradient Martensite Structure and Enhanced Mechanical Properties in a Metastable β Titanium Alloy10.1007/s11661-019-05157-5 ↗
52. Design and tensile properties of a bcc Ti-rich high-entropy alloy with transformation-induced plasticity10.1080/21663831.2016.1221861 ↗
53. A β-titanium alloy with extra high strain-hardening rate: Design and mechanical properties10.1016/j.scriptamat.2015.11.020 ↗
54. The influence of β phase stability on deformation mode and compressive mechanical properties of Ti-10V-3Fe-3Al alloy10.1016/j.actamat.2014.10.043 ↗