Electrical conduction mechanism of rare-earth calcium oxyborate high temperature piezoelectric crystals
Source abstract
Abstract
Abstract The electrical conduction behavior of piezoelectric crystals is critical in the design of piezoelectric sensors for use at elevated temperatures. The electrical resistivity and dielectric properties of rare-earth calcium oxyborate crystals ReCa4O(BO3)3 (ReCOB, Re = Y, Gd and Pr) are investigated in this report. The relationships between the electronic structures and electrical properties are then determined using X-ray photoelectron spectra and first principle calculations. Among the ReCOB type crystals, YCOB is found to possess the highest electrical resistivity and lowest dielectric loss. Nonlinearity of the electrical resistivity as a function of temperature for ReCOB crystals is then confirmed, corresponding to different conduction mechanisms. It is also revealed that the electrical conductivity of ReCOB type crystals is heavily influenced by oxygen vacancy defects at relatively lower temperatures (below ∼600 °C), while both vacancy defects and band gap contribute to conductivity at elevated temperatures (above ∼600 °C).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Acoustic Wave Resonator Technologies · Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Piezoelectric materials for high temperature sensors10.1111/j.1551-2916.2011.04792.x ↗
2. High-temperature piezoelectric sensing10.3390/s140100144 ↗
3. Piezoelectric Materials in Devices
4. Investigation of Ca3TaGa3Si2O14 piezoelectric crystals for high temperature sensors10.1063/1.3592347 ↗
5. Piezoelectric energy harvesting using a diaphragm structure
6. High-temperature piezoelectric crystals ReCa4o(Bo3)3: a review10.1109/TUFFC.2014.3042 ↗
7. Materials for high temperature acoustic and vibration sensors: a review10.1016/0003-682X(94)90091-4 ↗
8. High performance, high temperature piezoelectric crystals
9. High temperature piezoelectric materials: defect chemistry and electro-mechanical properties10.1007/s10832-006-9735-1 ↗
10. Gallium phosphate, GaPO4: a new piezoelectric crystal material for high-temperature sensorics10.1016/S0924-4247(97)80289-0 ↗
11. A quartz-like material: gallium phosphate (GaPO4); crystal growth and characterization10.1016/0022-0248(93)90852-N ↗
12. Liquid immiscibility in a CTGS (Ca3TaGa3Si2O14) melt10.1016/j.jcrysgro.2016.09.005 ↗
13. From ab initio forecast of piezoelectric properties to growth of piezoelectric single crystals10.1063/1.3025545 ↗
14. Characterization of the dielectric, piezoelectric, and elastic coefficients of Ca3TaGa3Si2O14 single crystals up to 800 °C10.1109/TUFFC.2016.2544662 ↗
15. Characterization of piezoelectric single crystal YCa4O(BO3)3 for high temperature applications10.1063/1.2936276 ↗
16. Influence of oxygen partial pressure during growth on optical and electrical properties of Ca3TaAl3Si2O14 single crystals10.1021/acs.cgd.5b01822 ↗
17. Growth and high-temperature electromechanical properties of Ca3NbX3Si2O14 (X= Ga and Al) piezoelectric crystals10.1016/j.ssc.2009.12.009 ↗
18. Dielectric and electromechanical properties of rare earth calcium oxyborate piezoelectric crystals at high temperatures10.1109/TUFFC.2011.1881 ↗
19. Electro-elastic properties of YCa4O(BO3)3 piezoelectric crystals10.1002/pssa.201330191 ↗
20. Structural stability and electro-elastic property of YCOB crystal annealed in harsh environment10.1063/1.5042284 ↗
21. Electrical properties of yttrium calcium oxyborate crystal annealed at high temperature and low oxygen partial pressure10.1016/j.jmat.2019.02.007 ↗
22. High temperature SAW wireless sensors based on YCOB and Langasite
23. YCaO(BO3)3 (YCOB) high temperature vibration sensor10.1063/1.3598115 ↗
24. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
25. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
26. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
27. Ground state of the electron gas by a stochastic method10.1103/PhysRevLett.45.566 ↗
28. Self-interaction correction to density-functional approximations for many-electron systems10.1103/PhysRevB.23.5048 ↗
29. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
30. Strain effects on oxygen vacancy formation energy in perovskites10.1016/j.ssi.2017.09.021 ↗
31. Investigation of the dielectric and piezoelectric properties of ReCa4O(Bo3)3 crystals10.1088/0022-3727/44/13/135405 ↗
32. Asymmetric cation coordination in oxide materials: influence of lone-pair cations on the intra-octahedral distortion in d0 transition metals10.1021/cm049297g ↗
33. The electronic structure of RbTiOPO4 and the effects of the A-site cation substitution in KTiOPO4-family crystals
34. Growth, electronic structure and properties of Rb2Ti1.95Yb0.05(PO4)3 crystals10.1016/j.jallcom.2015.11.147 ↗
35. Evaluation of surface cleaning procedures for CTGS substrates for saw technology with XPS10.3390/ma10121373 ↗
36. Nanosized tin dioxide: spectroscopic (UV–VIS, NIR, EPR) and electrical conductivity studies10.1039/b100553g ↗
37. Guan · 1992 · 323
38. Influence of point defects on the electrical conductivity and dielectric properties of langasite10.1007/s10789-005-0290-y ↗
39. Defects and transport in langasite I: acceptor-doped (La3Ga5SiO14 )10.1007/s10832-006-4081-x ↗
40. Electronic structure of oxygen vacancies in La2O3, Lu2O3 and LaLuO310.1016/j.mee.2009.03.016 ↗
41. Mechanism of hydrogen treatment in KTiOPO4 crystals at high temperature: experimental and first-principles studies10.1039/C5CE00071H ↗
42. Growth and optical activity of Ca3TaGa3Si2O14 (CTGS) single crystal10.1016/j.materresbull.2005.11.019 ↗