journal article·2019-05

Improved fast charging capability of graphite anodes via amorphous Al2O3 coating for high power lithium ion batteries

Dae Sik Kim, Yeong Eun Kim, Hansu Kim

Publisher page

Abstract

Abstract Fast charging capability is a high demand feature of lithium ion batteries used in electric vehicles; however, current lithium ion battery technology does not meet electric vehicles fast charging requirements. In this work, it demonstrates that surface modification of graphite using amorphous Al2O3 is an efficient way to improve the fast charging capability of graphite anode materials for lithium ion batteries. Surface-engineered graphite with 1 wt% Al2O3 exhibits a reversible capacity of about 337.1 mAh g−1, even at a high rate of 4000 mA g−1, corresponding to 97.2% of the capacity obtained at a current density of 100 mA g−1. Full cell tests adopting LiCoO2 cathodes and Al2O3-coated graphite anodes confirm that the introduction of amorphous Al2O3 can improve the fast charging capability of graphite anode materials. Wettability tests and electrochemical impedance spectroscopy analysis reveal that this fast charging improvement results from the increased electrolyte wettability on the graphite that is induced by the Al2O3 layer on its surface. Our approach is a practical means to attaining enhanced fast charging capabilities from graphite anode materials for use in high power lithium ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
3. Electrochemistry and the future of the automobile10.1021/jz100553m ↗
4. Potential for widespread electrification of personal vehicle travel in the United States10.1038/nenergy.2016.112 ↗
5. Fast charging of lithium-ion batteries at all temperatures10.1073/pnas.1807115115 ↗
6. Surface engineering of graphite anode material with black TiO2-x for fast chargeable lithium ion battery10.1016/j.electacta.2017.11.056 ↗
7. Niobium tungsten oxides for high-rate lithium-ion energy storage10.1038/s41586-018-0347-0 ↗
8. Exploring classes of co-solvents for fast-charging lithium-ion cells10.1149/2.1351810jes ↗
9. Improving wettability and preventing Li-ion batteries from thermal runaway using microchannels10.1016/j.ijheatmasstransfer.2017.11.063 ↗
10. Effect of calendering on electrode wettability in lithium-ion batteries10.3389/fenrg.2014.00056 ↗
11. Lithium-ion battery electrolyte mobility at nano-confined graphene interfaces10.1038/ncomms12693 ↗
12. Assessment of the wettability of porous electrodes for lithium-ion batteries10.1023/B:JACH.0000035599.56679.15 ↗
13. Design of battery electrodes with dual-scale porosity to minimize tortuosity and maximize performance10.1002/adma.201204055 ↗
14. Investigation of design parameter effects on high current performance of lithium-ion cells with LiFePO4/graphite electrodes10.1007/s10800-012-0418-0 ↗
15. Effect of electrode compression on the wettability of lithium-ion batteries10.1016/j.jpowsour.2014.04.127 ↗
16. Characterization of modified NG7 graphite as an improved anode for lithium-ion batteries10.1016/S0378-7753(96)02629-8 ↗
17. Fluidity of a slurry of the graphite powder coated with Al2O of-based metal oxides10.1023/A:1010970931622 ↗
18. Improved functionality of lithium-ion batteries enabled by atomic layer deposition on the porous microstructure of polymer separators and coating electrodes10.1002/aenm.201100750 ↗
19. Ultra-deep oxidative desulfurization of diesel fuel with H2O2 catalyzed under mild conditions by polymolybdates supported on Al2O310.1016/j.apcata.2006.01.027 ↗
20. Structural and XPS characterization of ALD Al2O3 coated porous silicon10.1016/j.vacuum.2014.12.015 ↗
21. On the surface modifications of high-voltage oxide cathodes for lithium-ion batteries: new insight and significant safety improvement10.1039/c0jm00617c ↗
22. Influence of annealing environment on the ALD-Al2O3/4H-SiC interface studied through XPS10.1088/1361-6463/aaa9a1 ↗
23. Synthesis and characterization of boehmitic alumina coated graphite by sol–gel method10.1016/j.ceramint.2008.11.006 ↗
24. Ultra-deep oxidative desulfurization of diesel fuel with H2O2 catalyzed under mild conditions by polymolybdates supported on Al2O310.1016/j.apcata.2006.01.027 ↗
25. Wettability by water and oxidation resistance of alumina-coated graphite powder10.2109/jcersj.103.929 ↗
26. Improving the water-wettability and oxidation resistance of graphite using Al2O3/SiO2 sol–gel coatings10.1016/S0955-2219(02)00284-4 ↗
27. Synthesis of an Al2O3-coated polyimide nanofiber mat and its electrochemical characteristics as a separator for lithium ion batteries10.1016/j.jpowsour.2013.10.056 ↗
28. Introduction to electrochemical impedance spectroscopy as a measurement method for the wetting degree of lithium-ion cells10.1149/2.0081814jes ↗