Influence of electrolyte additives on the cathode electrolyte interphase (CEI) formation on LiNi1/3Mn1/3Co1/3O2 in half cells with Li metal counter electrode
Source abstract
Abstract
Abstract Traditional solid electrolyte interphase (SEI) forming additives of vinylene carbonate (VC), fluoroethylene carbonate (FEC) and ethylene sulfite (ES) are studied with respect to their impact on the formation and growth of the cathode electrolyte interphase (CEI) layer. T-half cells are assembled and undergo three different electrochemical investigation plans: after formation (0.1C, 5 cycles) and long term cycling (0.1C, 5 constant current cycles + 1C, 100/150 constant current/voltage cycles), scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and gas chromatography-mass spectrometry (GC-MS) are combined to investigate morphology, CEI composition, CEI thickness and aging products for cells with different electrolyte systems. The obtained results reveal a significant influence of these additives on the CEI composition and CEI growth. With the help of SEM, it is found that large areas of electrolyte decomposition products are formed at the aged electrode surfaces (=after cycling), with the exception when 2 vol% of FEC is added into the reference electrolyte. From XPS measurements, CEI thicknesses are calculated. The reference electrolyte with 2 vol% of FEC shows the thinnest layer after long time aging (0.8 ± 0.2 nm). For the addition of 2 vol% of VC, an incremental growth of the CEI thickness occurs from the 100th to 150th cycle (from 1.0 ± 0.1 nm to 2.9 ± 0.4 nm). By correlating the CEI thickness values with the electrochemical performance, it can be observed that for lithium metal based half cells, the existence of a thinner CEI layer corresponds to a better cycling behavior, with 2 vol% of FEC showing the highest discharge capacity of 114.4 ± 0.2 mAh/g after 150 cycles at 1C. GC-MS shows that both VC and FEC help to prevent fast electrolyte aging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Linden · 1984 · 1075
2. Building better batteries10.1038/451652a ↗
3. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
4. Recent developments in cathode materials for lithium ion batteries10.1016/j.jpowsour.2009.08.089 ↗
5. A review on electrolyte additives for lithium-ion batteries10.1016/j.jpowsour.2006.07.074 ↗
6. Lithium ion battery production10.1016/j.jct.2011.09.005 ↗
7. Matsuda, Y., K. Teraji, and Y. Takasu, Cathodic performance of CuO electrode in propylene carbonate. 1976, Electrochemical Soc Japan 12-1 1 Chome Yuraku-Cho, Chiyoda-Ku, Tokyo 100, Japan. p. 363–364.
8. On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries10.1016/S0013-4686(01)00858-1 ↗
9. Bifunctional electrolyte additive for lithium-ion batteries10.1016/j.elecom.2006.11.002 ↗
10. Ethylene sulfite as electrolyte additive for lithium-ion cells with graphitic anodes10.1149/1.1391630 ↗
11. 2-Cyanofuran—A novel vinylene electrolyte additive for PC-based electrolytes in lithium-ion batteries10.1016/j.jpowsour.2005.09.021 ↗
12. In-situ FTIR investigations on the reduction of vinylene electrolyte additives suitable for use in lithium-ion batteries10.1007/s00216-004-2522-4 ↗
13. Acrylic acid nitrile, a film-forming electrolyte component for lithium-ion batteries, which belongs to the family of additives containing vinyl groups10.1016/S0378-7753(03)00268-4 ↗
14. In situ characterization of the SEI formation on graphite in the presence of a vinylene group containing film-forming electrolyte additives10.1016/S0378-7753(03)00289-1 ↗
15. The solid electrolyte interphase–the most important and the least understood solid electrolyte in rechargeable Li batteries
16. Electrochemical impedance spectroscopy study of the SEI formation on graphite and metal electrodes10.1016/j.jpowsour.2005.05.034 ↗
17. Isocyanate compounds as electrolyte additives for lithium-ion batteries10.1016/j.jpowsour.2007.06.141 ↗
18. Ethyl isocyanate—An electrolyte additive from the large family of isocyanates for PC-based electrolytes in lithium-ion batteries10.1016/j.jpowsour.2007.06.140 ↗
19. 4-Bromobenzyl isocyanate versus benzyl isocyanate—New film-forming electrolyte additives and overcharge protection additives for lithium ion batteries10.1016/j.jpowsour.2007.06.142 ↗
20. XRD evidence for the electrochemical formation of in PC-based electrolytes10.1016/j.elecom.2005.06.009 ↗
21. Electrolyte decomposition reactions on tin-and graphite-based anodes are different10.1149/1.1739312 ↗
22. Functional electrolytes: novel type additives for cathode materials, providing high cycleability performance10.1016/j.jpowsour.2005.05.067 ↗
23. An artificial solid electrolyte interphase enables the use of a LiNi0.5Mn1.5O4 5 V cathode with conventional electrolytes10.1002/aenm201300378 ↗
24. Fluoroethylene carbonate as electrolyte additive in tetraethylene glycol dimethyl ether based electrolytes for application in lithium ion and lithium metal batteries10.1149/2.0011507jes ↗
25. Fluoroethylene carbonate as an additive for γ-butyrolactone based electrolytes10.1149/2.009309jes ↗
26. Cyclic and acyclic sulfites: new solvents and electrolyte additives for lithium ion batteries with graphitic anodes?10.1016/S0378-7753(01)00536-5 ↗
27. The current move of lithium ion batteries towards the next phase10.1002/aenm.201200028 ↗
28. Recent progress in cathode materials research for advanced lithium ion batteries
29. Composition and growth behavior of the surface and electrolyte decomposition layer of/on a commercial lithium ion battery LixNi1/3Mn1/3Co1/3O2 cathode determined by sputter depth profile X-ray photoelectron spectroscopy10.1021/la403276p ↗
30. Identification of alkylated phosphates by gas chromatography–mass spectrometric investigations with different ionization principles of a thermally aged commercial lithium ion battery electrolyte10.1016/j.chroma.2015.03.048 ↗
31. The truth about the 1st cycle Coulombic efficiency of LiNi1/3Co1/3Mn1/3O2 (NCM) cathodes10.1039/C5CP07718D ↗
32. Understanding structural changes in NMC Li-ion cells by in situ neutron diffraction10.1016/j.jpowsour.2014.01.010 ↗
33. Performance of layered Li (Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries10.1016/S0013-4686(02)00593-5 ↗
34. The effect of the binder morphology on the cycling stability of Li–alloy composite electrodes10.1016/S0022-0728(01)00532-0 ↗
35. Investigation of PF6− and TFSI− anion intercalation into graphitized carbon blacks and its influence on high voltage lithium ion batteries10.1039/C4CP04113E ↗
36. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries10.1016/j.electacta.2010.05.072 ↗
37. Surface chemistry of carbon-treated LiFePO4 particles for Li-ion battery cathodes studied by PES10.1149/1.1594413 ↗
38. The reaction of lithium with dimethyl carbonate and diethyl carbonate in ultrahigh vacuum studied by X-ray photoemission spectroscopy10.1021/la980454y ↗
39. Surface film formation on electrodes in a LiCoO2/graphite cell: a step by step XPS study10.1016/j.jpowsour.2007.06.033 ↗
40. Calculations of electron inelastic mean free paths10.1002/sia.740210302 ↗
41. Calculation of electron inelastic mean free paths (IMFPs) VII. Reliability of the TPP-2M IMFP predictive equation10.1002/sia.1526 ↗
42. XPS topofactors: determining overlayer thickness on particles and fibres10.1002/sia.3044 ↗
43. The influence of different conducting salts on the metal dissolution and capacity fading of NCM cathode material10.1016/j.electacta.2014.04.091 ↗
44. Anode passivation and electrolyte solvent disproportionation: mechanism of ester exchange reaction in lithium-ion batteries10.1149/1.1837726 ↗
45. Formation mechanism of alkyl dicarbonates in Li-ion cells10.1016/j.jpowsour.2005.02.021 ↗
46. Electrolytes for advanced batteries10.1016/S0378-7753(99)00188-3 ↗
47. Suppression of an alkyl dicarbonate formation in Li-ion cells10.1149/1.2034517 ↗
48. Mass spectrometry investigations on electrolyte degradation products for the development of nanocomposite electrodes in lithium ion batteries10.1021/ac051987w ↗
49. Deciphering the multi-step degradation mechanisms of carbonate-based electrolyte in Li batteries10.1016/j.jpowsour.2007.11.110 ↗
50. Gas chromatography/mass spectrometry as a suitable tool for the Li-ion battery electrolyte degradation mechanisms study10.1021/ac101948u ↗