Solid oxide fuel cell (SOFC) performance evaluation, fault diagnosis and health control: A review
Source abstract
Abstract
Abstract Solid oxide fuel cells are a promising alternative energy source for new energy vehicles, distributed power generation and military equipment. It has the advantages of high efficiency, low noise, low emission and flexible fuel. In order to commercialize solid oxide fuel cells with high efficiency, long life and stable operation, the performance of the cells is usually improved by the following schemes: First, the performance of the system is evaluated, and the best possible static operating point and dynamic and static switching trajectories are obtained by assessing the operating characteristics as well as the dynamic and static characteristics of the system. Secondly, fault diagnosis of the system is used to detect possible faults in the system in time and prevent the damage of faults to the system performance. Finally, the corresponding control strategy is formulated for the operating characteristics of the SOFC and the possible faults to ensure the efficient and stable operation of the system. This paper presents the current status of research on performance evaluation, fault diagnosis, and health control of solid oxide fuel cell systems, and presents current research gaps as well as future directions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Recent development on performance modelling and fault diagnosis of fuel cell systems10.1007/s40435-017-0328-4 ↗
2. Reliability analysis and initial requirements for FC systems and stacks10.1016/j.jpowsour.2006.11.085 ↗
3. Parameters and their impacts on the temperature distribution and thermal gradient of solid oxide fuel cell10.1016/j.apenergy.2019.03.034 ↗
4. A review of heat transfer and thermal management methods for temperature gradient reduction in solid oxide fuel cell (SOFC) stacks10.1016/j.apenergy.2020.115899 ↗
5. Comprehensive analysis of trends and emerging technologies in all types of fuel cells based on a computational method
6. Diagnosis methodology and technique for solid oxide fuel cells: a review10.1016/j.ijhydene.2013.02.024 ↗
7. Juričić, State of health estimation and remaining useful life prediction of solid oxide fuel cell stack10.1016/j.enconman.2017.06.041 ↗
8. Model-based development of a fault signature matrix to improve solid oxide fuel cell systems on-site diagnosis10.1016/j.jpowsour.2015.01.037 ↗
9. Data-driven techniques for fault diagnosis in power generation plants based on solid oxide fuel cells10.1016/j.enconman.2018.10.107 ↗
10. Feedforward-feedback control of a solid oxide fuel cell power system10.1016/j.ijhydene.2018.01.203 ↗
11. Optimal fault-tolerant control strategy of a solid oxide fuel cell system10.1016/j.jpowsour.2017.08.017 ↗
12. Performance degradation and fault mechanisms based solid oxide fuel cell system multimode modeling and analysis10.1109/CAC.2018.8623379 ↗
13. Adaptive observer based approach for the fault diagnosis in solid oxide fuel cells10.1016/j.jprocont.2019.09.010 ↗
14. Fault detection and assessment for solid oxide fuel cell system gas supply unit based on novel principal component analysis
15. Performance analysis of planar-type unit SOFC considering current and temperature distributions10.1016/S0167-2738(00)00645-7 ↗
16. A control oriented low order dynamic model for planar SOFC using minimum Gibbs free energy method10.1016/j.jpowsour.2006.12.009 ↗
17. Dynamic analysis of planar solid oxide fuel cell models with different assumptions of temperature layers10.1115/1.2971055 ↗
18. Thermal modelling of ethanol-fuelled solid oxide fuel cells10.1016/j.apenergy.2019.01.025 ↗
19. Numerical study on carbon deposition of SOFC with unsteady state variation of porosity10.1016/j.apenergy.2012.02.055 ↗
20. A nonlinear sliding mode observer for the estimation of temperature distribution in a planar solid oxide fuel cell10.1016/j.ijhydene.2014.10.117 ↗
21. Modelling of finger-like channelled anode support for SOFCs application10.1007/s11434-016-1131-x ↗
22. Experimental and numerical analysis of a SOFC-CHP system with adsorption and hybrid chillers for telecommunication applications10.1016/j.apenergy.2018.02.063 ↗
23. Dynamic simulation of a multi-generation system, for electric and cooling energy provision, employing a SOFC cogenerator and an adsorption chiller10.1016/j.egypro.2017.12.705 ↗
24. Numerical analysis of operating range and SOFC-off-gas combustor requirements of a biogas powered SOFC-MGT hybrid power plant10.1016/j.apenergy.2018.09.166 ↗
25. Effects of combustion parameters on reforming performance of a steam-methane reformer10.1016/j.fuel.2013.04.078 ↗
26. Performance and combustion analysis of a micro gas turbine-solid oxide fuel cell hybrid system10.1115/1.2756572 ↗
27. Design of SOFC based oxyfuel combustion systems with anode recycling and steam recycling options10.1016/j.enconman.2017.09.023 ↗
28. An integrated power generation system combining solid oxide fuel cell and oxy-fuel combustion for high performance and CO2 capture10.1016/j.apenergy.2010.10.037 ↗
29. Fuel utilization effects on system efficiency in solid oxide fuel cell gas turbine hybrid systems10.1016/j.apenergy.2018.07.004 ↗
30. Development of solid oxide fuel cell and battery hybrid power generation system10.1016/j.ijhydene.2020.01.032 ↗
31. Thermal integration of a SOFC power generator and a Na–NiCl2 battery for CHP domestic application10.1016/j.apenergy.2016.04.051 ↗
32. An innovative control strategy of a single converter for hybrid fuel cell/supercapacitor power source10.1109/TIE.2010.2044123 ↗
33. Energy management of a hybrid system based on a fuel cell and a Lithium Ion battery: experimental tests and integrated optimal design10.1016/j.matcom.2016.01.007 ↗
34. Power source protection method for hybrid polymer electrolyte membrane fuel cell/lithium-ion battery system10.1016/j.renene.2017.03.088 ↗
35. Online extremum seeking-based optimized energy management strategy for hybrid electric tram considering fuel cell degradation10.1016/j.apenergy.2021.116505 ↗
36. Multi-objective optimization and data-driven constraint adaptive predictive control for efficient and stable operation of PEMFC system
37. Power management strategy based on adaptive droop control for a fuel cell-battery-supercapacitor hybrid tramway10.1109/TVT.2017.2715178 ↗
38. Real-time implementation of maximum net power strategy based on sliding mode variable structure control for proton-exchange membrane fuel cell system10.1109/TTE.2020.2970835 ↗
39. Comparative analysis of SOFC-GT freight locomotive fueled by natural gas and diesel with onboard reformation10.1016/j.apenergy.2015.01.093 ↗
40. Fuel cell electric vehicle as a power plant and SOFC as a natural gas reformer: an exergy analysis of different system designs10.1016/j.apenergy.2016.03.107 ↗
41. Multi-objective design and operation of solid oxide fuel cell (SOFC) triple combined-cycle power generation systems: integrating energy efficiency and operational safety10.1016/j.apenergy.2016.11.010 ↗
42. Solar-assisted integrated biogas solid oxide fuel cell (SOFC) installation in wastewater treatment plant: energy and economic analysis10.1016/j.apenergy.2017.01.070 ↗
43. Performance assessment of a hybrid SOFC/MGT cogeneration power plant fed by syngas from a biomass down-draft gasifier10.1016/j.apenergy.2017.08.077 ↗
44. Assessment of heat-to-power ratio in a bio-oil sorption enhanced steam reforming and solid oxide fuel cell system10.1016/j.enconman.2019.01.023 ↗
45. Transient performance of integrated SOFC system including spatial temperature control10.1115/FuelCell2010-33304 ↗
46. Thermal management of an independent steam reformer for a solid oxide fuel cell with constrained generalized predictive control10.1016/j.ijhydene.2012.05.119 ↗
47. Predictive control of solid oxide fuel cell based on an improved Takagi-Sugeno fuzzy model10.1016/j.jpowsour.2009.04.022 ↗
48. Control-oriented thermal management of solid oxide fuel cells based on a modified Takagi-Sugeno fuzzy model10.1016/j.jpowsour.2008.12.012 ↗
49. Control-oriented modeling analysis and optimization of planar solid oxide fuel cell system10.1016/j.ijhydene.2016.08.213 ↗
50. Modeling and model-based analysis of a solid oxide fuel cell thermal-electrical management system with an air bypass valve10.1016/j.electacta.2015.01.211 ↗
51. Dynamic modeling and analysis of a 5-kW solid oxide fuel cell system from the perspectives of cooperative control of thermal safety and high efficiency10.1016/j.ijhydene.2014.10.149 ↗
52. Thermal management oriented steady state analysis and optimization of a kW scale solid oxide fuel cell stand-alone system for maximum system efficiency10.1016/j.ijhydene.2013.07.052 ↗
53. Improvement on the design and fabrication of planar SOFCs with anode–supported cells based on modified button cells10.1016/j.renene.2017.03.070 ↗
54. Effect of TiC particles size on the oxidation resistance of TiC/hastelloy composites applied for intermediate temperature solid oxide fuel cell interconnects10.1016/j.jallcom.2018.11.224 ↗
55. Surface pretreatment of alumina forming alloy and its implication on Cr evaporation10.1149/08502.0057ecst ↗
56. SOFC single cells fed by biogas: experimental tests with trace contaminants10.1016/j.wasman.2017.11.030 ↗
57. Dynamic analysis of direct internal reforming in a SOFC stack with electrolyte-supported cells using a quasi-1D model10.1016/j.apenergy.2017.07.122 ↗
58. Numerical model of planar anode supported solid oxide fuel cell fed with fuel containing H2S operated in direct internal reforming mode (DIR-SOFC)10.1016/j.apenergy.2018.09.092 ↗
59. A numerical simulation model of high temperature fuel cells fed by biogas, Energy Sources, Part A Recover
60. SOFC stack coupled with dry reforming10.1016/j.apenergy.2016.08.167 ↗
61. Experimental activity on a 100-W IT-SOFC test bench fed by simulated syngas10.1061/(ASCE)EY.1943-7897.0000526 ↗
62. Thermoelectric characterization of an intermediate temperature solid oxide fuel cell system directly fed by dry biogas10.1016/j.enconman.2016.08.079 ↗
63. Electrical and thermal analysis of an intermediate temperature IIR-SOFC system fed by biogas10.1002/ese3.187 ↗
64. A high performance direct carbon solid oxide fuel cell – a green pathway for brown coal utilization10.1016/j.apenergy.2019.04.104 ↗
65. Effect of pre-calcined ceramic powders at different temperatures on Ni-YSZ anode-supported SOFC cell/stack by low pressure injection molding10.1016/j.ceramint.2019.06.270 ↗
66. Degradation analysis and durability improvement for SOFC 1-cell stack10.1016/j.apenergy.2016.04.094 ↗
67. Performance degradation and analysis of 10-cell anode-supported SOFC stack with external manifold structure10.1016/j.energy.2016.12.107 ↗
68. Long-term testing of SOFC stacks at forschungszentrum jülich10.1002/fuce.201200151 ↗
69. SOFC durability against standby and shutdown cycling10.1149/2.0421409jes ↗
70. Durability test and degradation behavior of a 2.5 kW SOFC stack with internal reforming of LNG10.1016/j.ijhydene.2013.09.140 ↗
71. Experimental analysis on performance and durability of SOFC demonstration unit10.1002/fuce.200900152 ↗
72. Design and performance assessment of a combined heat, hydrogen and power (CHHP) system based on ammonia-fueled SOFC10.1016/j.apenergy.2018.09.138 ↗
73. Applicability of the SOFC technology for coupling with biomass-gasifier systems: short- and long-term experimental study on SOFC performance and degradation behaviour10.1016/j.apenergy.2019.113904 ↗
74. Numerical analysis of flow configurations and electrical contact positions in SOFC single cells and their impact on local effects10.1016/j.ijhydene.2018.11.132 ↗
75. Artificial neural network simulator for SOFC performance prediction10.1016/S0378-7753(02)00314-2 ↗
76. Full load and part-load performance prediction for integrated sofc and microturbine systems
77. Hybrid approach to remaining useful life prediction of solid oxide fuel cell stack10.1149/07801.2251ecst ↗
78. Fault diagnosis and prognostic of solid oxide fuel cells10.1016/j.jpowsour.2016.04.080 ↗
79. A prognostic-based dynamic optimization strategy for a degraded solid oxide fuel cell
80. Solid oxide fuel cell fault diagnosis and ageing estimation based on wavelet transform approach10.1016/j.ijhydene.2016.06.143 ↗
81. Intelligent simultaneous fault diagnosis for solid oxide fuel cell system based on deep learning10.1016/j.apenergy.2018.10.113 ↗
82. Data-driven simultaneous fault diagnosis for solid oxide fuel cell system using multi-label pattern identification10.1016/j.jpowsour.2018.01.015 ↗
83. Control-oriented fault detection of solid oxide fuel cell system unknown input on fuel supply10.1002/asjc.2014 ↗
84. Validation of neural network-based fault diagnosis for multi-stack fuel cell systems: stack voltage deviation detection10.1016/j.egypro.2015.12.072 ↗
85. On the use of neural networks and statistical tools for nonlinear modeling and on-field diagnosis of solid oxide fuel cell stacks10.1016/j.egypro.2014.01.032 ↗
86. Fault diagnosis of SOFC stack based on neural network algorithm10.1016/j.egypro.2019.01.423 ↗
87. Numerical analysis of an SOFC stack under loss of oxidant related fault conditions using a dynamic non-adiabatic model10.1016/j.ijhydene.2019.04.029 ↗
88. Evaluation of mechanical damages in SOFCs during start/stop operation by using acoustic emission technique10.1149/07801.2355ecst ↗
89. Time dependent failure probability estimation of the solid oxide fuel cell by a creep-damage related Weibull distribution model10.1016/j.ijhydene.2018.05.088 ↗
90. Non-destructive delamination detection in solid oxide fuel cells10.1016/j.jpowsour.2007.02.042 ↗
91. Electrochemical AC impedance model of a solid oxide fuel cell and its application to diagnosis of multiple degradation modes10.1016/j.jpowsour.2007.02.010 ↗
92. Short-stack modeling of degradation in solid oxide fuel cells. Part I. Contact degradation10.1016/j.jpowsour.2007.10.047 ↗
93. An adaptive non-linear observer for the estimation of temperature distribution in the planar solid oxide fuel cell10.1016/j.jprocont.2012.11.007 ↗
94. Simultaneous estimation of states and inputs in a planar solid oxide fuel cell using nonlinear adaptive observer design10.1016/j.jpowsour.2013.10.050 ↗
95. 3D modeling of anode-supported planar SOFC with internal reforming of methane10.1016/j.jpowsour.2007.07.003 ↗
96. Process flow model of solid oxide fuel cell system supplied with sewage biogas10.1016/j.jpowsour.2004.01.013 ↗
97. An operando surface enhanced Raman spectroscopy (SERS) study of carbon deposition on SOFC anodes10.1039/C4CP05176A ↗
98. Carbon deposition diagnostics for reliability and state-of-health assessment of SOFC10.1149/08504.0025ecst ↗
99. Fault analysis and diagnosis of solid oxide fuel cell system
100. Reformer faults in SOFC systems: experimental and modeling analysis, and simulated fault maps10.1016/j.ijhydene.2014.09.063 ↗