journal article·2015-08

Enhanced reversible divalent zinc storage in a structurally stable α-MnO2 nanorod electrode

Muhammad Hilmy Alfaruqi, Jihyeon Gim, Sungjin Kim, Jinju Song, Jeonggeun Jo, Seokhun Kim, Vinod Mathew, Jaekook Kim

Publisher page

Abstract

Abstract In the present study, a nanorod-type α-MnO2 cathode is prepared by a facile hydrothermal method for rechargeable aqueous zinc-ion battery (ZIB) applications. Electron microscopy studies reveal rod shaped particles with approximately 20 nm of width and 200 nm of length. When tested for aqueous ZIBs, the α-MnO2 nanorod cathode exhibits an initial discharge capacity of 233 mA h/g at a current density of 83 mA/g with nearly 100% Coulombic efficiencies under prolonged cycling. Besides, the prepared cathode demonstrates decent rate capabilities at higher current densities (43.33 and 31.48 mA h/g at 1333 and 1666 mA/g, respectively). Ex-situ synchrotron XAS investigations clearly establish the reversibility of electrochemical Zn-insertion into the α-MnO2 nanorod cathode. The analyses also reveal that the host α-MnO2 structure demonstrates considerable structural stability during Zn-insertion/extraction. Further, a combination of ex-situ synchrotron XRD studies, visualization and pattern-fitting software programs not only confirm electrochemical Zn-insertion into the host α-MnO2 structure but also suggest that the unit cell volume of the [2×2] tunnels in the α-MnO2 host expands by approximately 3.12% during Zn-insertion. The present study thus paves the way for further development of eco-friendly ZIB as an ideal energy storage system due to its excellent safety and reliability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Advancements in Battery Materials · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Electrochemical characterization of a zinc-based gel-polymer electrolyte and its application in rechargeable batteries10.1149/1.1566017 ↗
2. The secondary alkaline zinc electrode10.1149/1.2085653 ↗
3. Improvement of high-rate capability of alkaline Zn–MnO2 battery10.1016/S0378-7753(02)00354-3 ↗
4. Facile synthesis of α-MnO2 nanorods for high-performance alkaline batteries10.1016/j.jpcs.2009.11.016 ↗
5. The mechanism of capacity fade of rechargeable alkaline manganese dioxide zinc cells10.1016/S0378-7753(99)00476-0 ↗
6. Energetic zinc ion chemistry: The rechargeable zinc ion battery10.1002/anie.201106307 ↗
7. Investigation of the intercalation of polyvalent cations (Mg2+, Zn2+) into λ-MnO2 for rechargeable aqueous battery10.1016/j.electacta.2013.11.090 ↗
8. Todorokite-type MnO2 as a zinc-ion intercalating material10.1016/j.electacta.2013.08.136 ↗
9. Self-assembled mesoporous manganese oxide with high surface area by ambient temperature synthesis and its enhanced electrochemical properties10.1016/j.elecom.2011.04.023 ↗
10. Mesoporous crystalline β-MnO2—a reversible positive electrode for rechargeable lithium batteries10.1002/adma.200602499 ↗
11. Synthesis and characterization of the hollandite-type MnO2 as a cathode material in lithium batteries10.1016/S0013-4686(99)00441-7 ↗
12. Improvement of the electrochemical performance of nanosized α-MnO2 used as cathode material for Li-batteries by Sn-doping10.1016/j.jallcom.2011.07.075 ↗
13. MnO2 (α-, β-, γ-) compounds prepared by hydrothermal-electrochemical synthesis: characterization, morphology, and lithium insertion behavior10.1016/S0378-7753(03)00238-6 ↗
14. Effect of crystallographic structure of MnO2 on its electrochemical capacitance properties10.1021/jp7108785 ↗
15. A facile template-free synthesis of α-MnO2 nanorods for supercapacitor10.1016/j.jallcom.2013.01.117 ↗
16. Hydrothermal synthesis of α-MnO2 and β-MnO2 nanorods as high capacity cathode materials for sodium ion batteries10.1039/c3ta00031a ↗
17. Effect of phase structure of MnO2 nanorod catalyst on the activity for CO oxidation10.1021/jp0774995 ↗
18. The control of the diameter and length of α-MnO2 nanorods by regulation of reaction parameters and their thermogravimetric properties10.1016/j.materresbull.2010.10.012 ↗
19. Synthesis of hierarchically mesoporous anatase spheres and their application in lithium batteries10.1039/b605090e ↗
20. Preparation of single-crystal α-MnO2 nanorods and nanoneedles from aqueous solution10.1016/j.jallcom.2004.12.049 ↗
21. Preparation and characterization of manganese dioxide with nano-sized tunnel structures for zinc ion storage10.1016/j.jpcs.2011.11.038 ↗
22. Novel lithium-ion cathode materials based on layered manganese oxides10.1002/1521-4095(200107)13:12/13<943::AID-ADMA943>3.0.CO;2-J ↗
23. Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds10.1016/j.matchemphys.2005.01.061 ↗
24. Formation and structural properties of layered LiMnO2 cathode materials10.1149/1.1394022 ↗
25. Facile fabrication of MnO2 nanorod/graphene hybrid as cathode materials for lithium batteries10.1016/j.electacta.2013.05.108 ↗
26. Enhanced performance of a MnO2–graphene sheet cathode for lithium ion batteries using sodium alginate as a binder10.1039/c2jm31583a ↗
27. Graphene-wrapped MnO2–graphene nanoribbons as anode materials for high-performance lithium ion batteries10.1002/adma.201302915 ↗
28. Table sugar as preparation and carbon coating reagent for facile synthesis and coating of rod-shaped MnO210.1016/j.jallcom.2010.03.039 ↗
29. Nanoflaky MnO2/carbon nanotube nanocomposites as anode materials for lithium-ion batteries10.1039/c0jm00759e ↗
30. Enhanced performance of a MnO2–graphene sheet cathode for lithium ion batteries using sodium alginate as a binder10.1039/c2jm31583a ↗
31. Coaxial MnO2/carbon nanotube array electrodes for high-performance lithium batteries10.1021/nl803081j ↗
32. Graphene and graphene-based materials for energy storage applications10.1002/smll.201303202 ↗
33. A sodium manganese oxide cathode by facile reduction for sodium batteries10.1002/asia.201301510 ↗
34. Jahn-Teller transition of LiMn2O4 studied by x-ray-absorption spectroscopy10.1103/PhysRevB.58.8 ↗
35. In situ Mn K-edge X-ray absorption spectroscopy studies of electrodeposited manganese oxide films for electrochemical capacitors10.1021/jp063130o ↗
36. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗