Catalysts for direct formic acid fuel cells

Abstract Previous work has demonstrated that formic acid fuel cells show interesting properties for micro power generation. In this paper the effects of the anode catalyst composition on fuel cell performance is investigated. In particular, the performance of Pt, Pt/Pd and Pt/Ru catalysts for direct formic acid fuel cells is investigated and their effect on cell power density output at 30 °C are compared. It is found that the open cell potential varies significantly with the catalyst composition. The Pt/Pd catalyst shows an open cell potential of 0.91 V compared to 0.71 V with pure platinum and 0.59 V with Pt/Ru. The current at a cell potential of 0.5 V is 62 mA/cm2 with Pt/Pd compared to 33 mA/cm2 with pure platinum and 38 mA/cm2 with Pt/Ru. Interestingly, the Pt/Ru catalyst gives the most power at low voltage 70 mW/cm2 at 0.26 V, compared to 43 mW/cm2 for pure platinum and 41 mW/cm2 for Pt/Pd. All of the catalysts showed stable operation during several hour tests. Analysis of the data indicates that the addition of palladium enhances the rate of formic acid electrooxidation via a direct reaction mechanism, while ruthenium additions suppress the direct pathway and enhance electrooxidation via a reactive CO intermediate.