journal article·2006-06

The role of carbon in fuel cells

Andrew L. Dicks

Journal of Power Sources· Volume 156· Issue 2
Publisher page

Abstract

Carbon possesses unique electrical and structural properties that make it an ideal material for use in fuel cell construction. In alkaline, phosphoric acid and proton-exchange membrane fuel cells (PEMFCs), carbon is used in fabricating the bipolar plate and the gas-diffusion layer. It can also act as a support for the active metal in the catalyst layer. Various forms of carbon - from graphite and carbon blacks to composite materials - have been chosen for fuel-cell components. The development of carbon nanotubes and the emergence of nanotechnology in recent years has therefore opened up new avenues of matenials development for the low-temperature fuel cells, particularly the hydrogen PEMFC and the direct methanol PEMFC. Carbon nanotubes and aerogels are also being investigated for use as catalyst support, and this could lead to the production of more stable, high activity catalysts, with low platinum loadings (< 0.1 Mg cm(-2)) and therefore low cost. Carbon can also be used as a fuel in high-temperature fuel cells based on solid oxide, alkaline or molten carbonate technology. In the direct carbon fuel cell (DCFC), the energy of combustion of carbon is converted to electrical power with a thermodynamic efficiency close to 100%. The DCFC could therefore help to extend the use of fossil fuels for power generation as society moves towards a more sustainable energy future. (c) 2006 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. An X-ray study of carbon blacks produced from coals10.1016/0008-6223(67)90064-4 ↗
2. Frondel · Nature · 1967 · 214 · 58710.1038/214587a0 ↗
3. C60: buckminsterfullerene10.1038/318162a0 ↗
4. Helical microtubes of graphitic carbon10.1038/354056a0 ↗
5. Ijima · Nature · 1991 · 354 · 5610.1038/354056a0 ↗
6. Formation of cluster-assembled carbon nano-foam by high-repetition-rate laser ablation10.1007/s003390050025 ↗
7. Unconventional magnetism in all-carbon nanofoam, American Physical Society10.1103/PhysRevB.70.054407 ↗
8. Electronic properties of carbon nanotubes with polygonized cross section, American Physical Society10.1103/PhysRevB.54.R8377 ↗
9. Larminie · 2003
10. Kordesch · 199610.1002/352760653X ↗
11. Alkaline fuel cells with carbon electrodes10.1016/0378-7753(86)80089-1 ↗
12. Alkaline fuel cell applications10.1016/S0378-7753(99)00429-2 ↗
13. A.S. Hay, Multi-layer coating for protecting metallic substrates, Patent pending, Ref. No. 01172, McGill Office of Technology Transfer, available at http://www.mcgill.ca/ott/technologies/puerappsci/01172/, 2005.
14. Non-planar architecture for proton exchange membrane fuel cells10.1016/S0378-7753(01)00818-7 ↗
15. PEM fuel cells: evaluation of concepts for a bipolar plate design and construction
16. Honeywell carbon nanotubular fiber composites for fuel cell bipolar plates, World Patent No. WO 01/89013.
17. G. Marchetti, Thin graphite bipolar plate with gaskets and carbon cloth flow-field, World Patent No. WO 00/57500.
18. F. Jousse, J. Granier, Towards a new conception of the bipolar plate, Clefs, 44 (2001) 52, CEA, France, available from http://www.cea.fr/gb/publications/clefs44.
19. The electrical and physical properties of alternative material bipolar plate for PEM fuel cell systems10.1016/j.electacta.2004.03.061 ↗
20. Characteristics of composite bipolar plates for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2003.08.039 ↗
21. On the improved properties of injection-moulded, carbon nanotube-filled PET/PVDF blends10.1016/j.jpowsour.2004.04.016 ↗
22. A novel concept of carbon-filled polymer blends for applications in PEM fuel cell bipolar plates10.1016/j.ijhydene.2004.08.005 ↗
23. Injection moulded low cost bipolar plates for PEM fuel cells10.1016/j.jpowsour.2004.01.014 ↗
24. Bipolar plates for PEM fuel cells10.1016/S0378-7753(03)00070-3 ↗
25. Enhanced conductivity of fuel cell plates through controlled fibre orientation10.1002/aic.690490104 ↗
26. T.M. Besmann, J.W. Klett, J.H. Henry Jr., E. Lara-Curzio, Carbon/carbon composite bipolar plate for PEM fuel cells. Paper 02FCC 113, Society of Automotive Engineers Inc., 2001, available from http://www.ornl.gov.10.1557/PROC-756-FF7.1 ↗
27. D. Weber, Electrically conductive composites in fuel cell applications, Pittsburg State University, KA, Research Report from the Summer 2004 Fellowship in Interdisciplinary Materials Science, available from http://www.pittstate.edu/services/nsfreu.
28. Entegris, Cell Stack Plates, Data Sheet, Entegris Inc., Chaska Minnesota 55318, USA, 2003.
29. Importance of carbon black morphology on its use in electrically conductive polymer composites10.1016/0008-6223(84)90449-4 ↗
30. Ticona, Ticona Introduces First Engineering Thermoplastic Fuel Cell, Press Release, November 24, 2004, available http://www.ticona.com.
31. Timcal, Timrex graphite powders and dispersions for fuel cells, Data sheet, 2004, available from http://www.timcal.com.
32. Z. Iqbal, Nanocomposite for fuel cell bipolar plate, Honeywell, International Patent No. WO 01/89013, 2001.
33. J. Huang, D.G. Baird, J.E. McGrath, Highly Conductive Thermoplastic Composites for Rapid Production of Fuel Cell Bipolar Plates, VTIP Disclosure No.: 02-120 (2002), Virginia Tech Intellectual Properties Inc.
34. Development of Biomimetic™ flow field plates for PEM fuel cells
35. Materials and processes for light weight and high power density PEM fuel cells
36. Gore-Tex Inc., Gas diffusion layer for PEM fuel cells using coated carbon fibre-cloth, US Patent No. 6,127,059.
37. Effect of structure on porous gas diffusion electrodes for phosphoric acid fuel cells10.1016/0378-7753(94)01898-7 ↗
38. An advanced gas diffusion electrode for high performance phosphoric acid fuel cells10.1016/0022-0728(94)03597-0 ↗
39. Performance of an alkaline fuel cell with single or double layer electrodes10.1016/S0360-3199(99)00019-1 ↗
40. Diffusion layer parameters influencing optimal fuel cell performance10.1016/S0378-7753(99)00489-9 ↗
41. Effect of diffusion layer morphology on the performance of solid polymer direct methanol fuel cells10.1016/S0378-7753(01)00877-1 ↗
42. Effects of carbon powder characteristics in the cathode diffusion layer on the performance of polymer electrolyte fuel cells10.1016/S0378-7753(02)00112-X ↗
43. Examination of the influence of PTFE coating on the properties of carbon paper in polymer electrolyte fuel cells10.1016/S0378-7753(96)02465-2 ↗
44. Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell10.1016/j.electacta.2004.04.009 ↗
45. The amount of hydrophobic resin binder in the microdiffusion layer for DMFC
46. Influence of diffusion layer properties on low temperature DMFC10.1016/j.jpowsour.2003.09.015 ↗
47. Integration of carbon aerogels in PEM fuel cells10.1016/S0022-3093(01)00468-9 ↗
48. Gas diffusion electrodes for polymer electrolyte fuel cells using novel organic/inorganic hybrid electrolytes: effect of carbon black addition in the catalyst layer10.1016/j.electacta.2004.11.018 ↗
49. Gas diffusion electrodes for polymer electrolyte fuel cells using borosiloxane electrolytes10.1016/j.ssi.2004.04.004 ↗
50. Huang · J. Colloid Interface Sci. · 2005 · 284 · 59310.1016/j.jcis.2004.10.067 ↗
51. Carbons as supports for industrial precious metal catalyst10.1016/S0926-860X(98)00184-7 ↗
52. Catalysis for low temperature fuel cells: part I, the cathode challenges10.1595/003214002X461314 ↗
53. Relationships between physicochemical properties and electrooxidation behaviour of carbon materials10.1016/0013-4686(91)85075-I ↗
54. The physical and chemical state of phosphoric acid fuel cell assemblies after long term operation: surface and near-surface analysis10.1016/0378-7753(91)80010-U ↗
55. Thermal degradation of the support in carbon-supported platinum electrocatalysts for PEM fuel cells10.1016/j.carbon.2004.09.004 ↗
56. Catalysis for low temperature fuel cells: part II the anode challences10.1595/003214002X463117135 ↗
57. Physical and morphological characteristics and electrochemical behaviour in PEM fuel cells of PtRu/C catalysts10.1007/s100080000116 ↗
58. Effect of catalyst support particle size on membrane electrode assembly performance
59. Influence of metal–support interaction in Pt/C on CO and methanol oxidation reactions10.1016/j.ssi.2004.08.030 ↗
60. Synthesis, characterisation and application of a Pd/Vulcan and Pd/C catalyst in a PEM fuel cell10.1016/j.ijhydene.2003.06.003 ↗
61. Xue · J. Mater. Chem. · 2001 · 11 · 238710.1039/b100618p ↗
62. Yu · Chem. Mater. · 1998 · 10 · 71810.1021/cm970364z ↗
63. Rajesh · J. Mater. Chem. · 2000 · 10 · 157510.1039/b002588g ↗
64. Boennemann · J. New Mater. Electrochem. Syst. · 2000 · 3 · 199
65. Preparation of Pt-Ru or Pt-Mo supported catalysts for PEM or direct methanol fuel cells from single-source molecular precursors
66. Preparation and characterisation of a PtRu/graphitic carbon nanofiber nanocomposite using a single source molecular precursor
67. Preparation of carbon-supported PtRu nanoparticles for direct methanol fuel cell applications—a comparative study10.1016/j.jpowsour.2004.10.010 ↗
68. Carbon-supported Pt nanoparticles for proton exchange membrane fuel cells10.1016/j.jpowsour.2004.07.012 ↗
69. Highly dispersed platinum on carbon aerogels as supported catalysts for PEM fuel cell electrodes: comparison of two different synthesis paths10.1016/j.jnoncrysol.2004.06.038 ↗
70. Novel carbon aerogel-supported catalysts for PEM fuel cell application10.1016/j.ijhydene.2004.04.014 ↗
71. W.W. Jacques, US Patent No. 555,511, 1896.
72. Liebhafsky · 1968
73. Gur · J. Electrochem. Soc. · 1992 · 139 · L9510.1149/1.2069025 ↗
74. Nakagava · Ind. Eng. Chem. Res. · 1988 · 27 · 118110.1021/ie00079a016 ↗
75. Solid state fuel storage and utilization through reversible carbon deposition on an SOFC anode10.1016/j.ssi.2004.09.020 ↗
76. Horita · Electrochem. Soc. · 1995 · 142 · 262110.1149/1.2050064 ↗
77. T. Horita, N. Sakai, T. Kawada, H. Yokokawa, M. Dokiya, Solid oxide fuel cell and a carbon direct-oxidizing-type electrode for the fuel cell, US Patent 6,183,896 B1, 2001.
78. F.H. Cocks, H. LaViers, Carbon-ion fuel cell for the flameless oxidation of coal, US Patent 5,348,812, 1994.
79. R.D. Weaver, S.C. Leach, A.E. Bayce, L. Nanis, Direct Electrochemical Generation of Electricity from Coal, Report May 16, 1977–February 15, 1979, SRI, Menlo Park, CA 94025; SAN-0115/105-1.
80. Vutetakis · J. Electrochem. Soc. · 1987 · 134 · 302710.1149/1.2100334 ↗
81. Peelen · Appl. Electrochem. · 2000 · 30 · 138910.1023/A:1026586915244 ↗
82. Direct conversion of carbon fuels in a molten carbonate fuel cell10.1149/1.1836129 ↗
83. Solar thermal developments in Australia
84. Direct conversion of coal and coal-derived carbon in fuel cells, keynote address
85. R.J. Selman, Anodic oxidation in molten carbonate, Why molecular mechanism may be less relevant than wetting behavior, DOE Direct Carbon Fuel Cell Workshop, NETL, Pittsburgh, PA, July 30, 2003 (proceedings at http://www.netl.doe.gov).
86. J.F. Cooper, N. Cherepy, R. Upadhye, A. Pasternak, M. Steinberg, Direct Carbon Conversion: Review of Production and Electrochemical Conversion of Reactive Carbons, Economics and Potential Impact on the Carbon Cycle, US DOE Report, 2001, Preprint UCRL-ID-141818, December 12, 2000.10.2172/15007473 ↗
87. Design, efficiency and materials for carbon/air fuel cells
88. Carbon-air fuel cell without a reforming process10.1016/j.carbon.2004.03.036 ↗
89. Goret · Electrochim. Acta · 1967 · 12 · 106510.1016/0013-4686(67)80103-8 ↗
90. Fused salt systems