Recent developments in cathode materials for lithium ion batteries
Source abstract
Abstract
Abstract One of the challenges for improving the performance of lithium ion batteries to meet increasingly demanding requirements for energy storage is the development of suitable cathode materials. Cathode materials must be able to accept and release lithium ions repeatedly (for recharging) and quickly (for high current). Transition metal oxides based on the α-NaFeO 2 , spinel and olivine structures have shown promise, but improvements are needed to reduce cost and extend effective lifetime. In this paper, recent developments in cathode materials for lithium ion batteries are reviewed. This includes comparison of the performance characteristics of the promising cathode materials and approaches for improving their performances.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Materials and processing for lithium-ion batteries10.1007/s11837-008-0116-x ↗
3. Materials challenges facing electrical energy storage10.1557/mrs2008.82 ↗
4. Issue and challenges facing rechargeable thin film lithium batteries10.1016/j.materresbull.2007.08.031 ↗
5. Recent advances in liquid and polymer lithium-ion batteries10.1039/b707040n ↗
6. Materials for next-generation lithium batteries
7. Effect of electrolyte composition on initial cycling and impedance characteristics of lithium-ion cells10.1016/j.jpowsour.2008.02.047 ↗
8. Review on composite polymer electrolytes for lithium batteries10.1016/j.polymer.2006.05.069 ↗
9. Inorganic solid Li ion conductors: an overview10.1016/j.ssi.2009.03.022 ↗
10. Recent progress in solid oxide and lithium ion conducting electrolytes research10.1007/s11581-006-0013-7 ↗
11. Advanced cathode materials for lithium batteries
12. Lithium batteries and cathode materials10.1021/cr020731c ↗
13. Inorganic nanomaterials for batteries10.1039/b806372a ↗
14. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
15. Nanostructured materials for electrochemical energy conversion and storage devices10.1002/adma.200800627 ↗
16. Developments in nanostructured cathode materials for high-performance lithium-ion batteries10.1002/adma.200702242 ↗
17. Nanomaterials in Li-ion battery electrode design10.1007/978-0-387-46106-9_3 ↗
18. LiCoO2: Formation, structure, lithium and oxygen nonstoichiometry, electrochemical behavior and transport properties10.1016/j.ssi.2004.04.003 ↗
19. Synthesis and structure refinement of LiCoO2 single crystals10.1006/jssc.1998.7966 ↗
20. Investigation of the kinetic mechanism in overcharge process for Li-ion battery10.1016/j.ssi.2008.04.031 ↗
21. Failure mechanism of Li-ion battery at overcharge conditions10.1007/s10008-007-0449-3 ↗
22. Thermal and electrochemical behaviour of C/LixCoO2 cell during safety test10.1016/j.jpowsour.2007.09.102 ↗
23. Development of lithium-ion batteries with a LiCoO2 cathode toward high capacity by elevating charging potential10.1149/1.2916685 ↗
24. Cobalt dissolution in LiCoO2-based non-aqueous rechargeable batteries10.1016/0167-2738(95)00231-6 ↗
25. CoO2, the end member of the LixCoO2 solid solution10.1149/1.1836594 ↗
26. Solid-state redox reaction of LiCoO2 (R3m) for 4 volt secondary lithium cells10.1149/1.2059267 ↗
27. Studies on the degradation of Li-ion batteries by the use of microreference electrodes10.1016/j.jpowsour.2007.11.032 ↗
28. On “really” stoichiometric LiCoO210.1149/1.2968953 ↗
29. Thermodynamically induced surface modification for the stabilization of high-capacity LiCoO210.1149/1.2976207 ↗
30. Optimized LiFePO4 for lithium battery cathodes10.1149/1.1348257 ↗
31. Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds10.1016/j.matchemphys.2005.01.061 ↗
32. Reaction mechanism and kinetics of lithium ion battery cathode material LiNiO2 with CO210.1016/j.jpowsour.2007.04.083 ↗
33. Optimization of the composition of the Li1−zNi1+zO2 electrode materials: Structural, magnetic, and electrochemical studies10.1149/1.1836614 ↗
34. Characterization of Li1−xNi1+xO2 prepared using succinic acid as a complexing agent10.1134/S0020168506020166 ↗
35. Synthesis and electrochemical properties of LiNi0.9Co0.1O2 cathode material for lithium secondary battery10.1016/j.matchemphys.2008.08.015 ↗
36. Improved electrochemical properties of Li(Ni0.7Co0.3)O2 cathode for lithium ion batteries with controlled sintering conditions10.1007/s10800-008-9707-z ↗
37. Synthesis and characterization of LiNi1−xCoxO2 for lithium batteries by a novel method10.1016/j.matchemphys.2007.06.069 ↗
38. Structural and electrochemical studies on thin film LiNi0.8Co0.2O2 by PLD for micro battery10.1016/j.ssi.2008.11.012 ↗
39. Surface structure of LiNi0.8Co0.2O2: A new experimental technique using in situ x-ray diffraction and two-dimensional epitaxial film electrodes10.1021/cm8033559 ↗
40. Structural transformation on cycling layered Li(Mn1−yCoy)O2 cathode materials10.1016/S0013-4686(99)00211-X ↗
41. Formation and structural properties of layered LiMnO2 cathode materials10.1149/1.1394022 ↗
42. Synthesis of Li[Li0.2Ni0.2Mn0.6]O2 by radiated polymer gel method and impact of deficient Li on its structure and electrochemical properties10.1007/s10008-008-0546-y ↗
43. Electrochemical and structural study of the layered, “Li-excess” lithium-ion battery electrode material Li[Li1/9Ni1/3Mn5/9]O210.1021/cm900279u ↗
44. Recent advances in layered LiNixCoyMn1−x−yO2 cathode materials for lithium ion batteries10.1007/s10008-008-0671-7 ↗
45. Structural stability of chemically delithiated layered (1−z)Li[Li1/3Mn2/3]O2−z–Li[Mn0.5−yNi0.5−yCo2y]O2 solid solution cathodes10.1016/j.jpowsour.2008.05.028 ↗
46. Modeling the performance of lithium-ion batteries and capacitors during hybrid-electric-vehicle operation10.1149/1.2953524 ↗
47. A short review on surface chemical aspects of Li batteries: A key for a good performance10.1016/j.jpowsour.2008.09.084 ↗
48. A comparative study of electrodes comprising nanometric and submicron particles of LiNi0.50Mn0.50O2, LiNi0.33Mn0.33Co0.33O2, and LiNi0.40Mn0.40Co0.20O2 layered compounds10.1016/j.jpowsour.2008.09.090 ↗
49. A delithiated LiNi0.65Co0.25Mn0.10O2 electrode material: A structural, magnetic and electrochemical study10.1016/j.electacta.2008.11.057 ↗
50. Microemulsion preparation and electrochemical characteristics of LiNi1/3Co1/3Mn1/3O2 powders10.1016/j.jpowsour.2008.12.036 ↗
51. Synthesis and electrochemical properties of LiNi0.85−xCoxMn0.15O2 as cathode materials for lithium-ion batteries10.1007/s10008-007-0394-1 ↗
52. Effect of surface modifications on the layered solid solution cathodes (1−z) Li[Li1/3Mn2/3]O2−(z) Li[Mn0.5−yNi0.5−yCo2y]O210.1016/j.ssi.2008.11.002 ↗
53. Effect of electronic state of ions on the electrochemical properties of layered cathode materials LiNi1−2xCoxMnxO210.1134/S1023193508050066 ↗
54. Electrochemical properties of LiMn2−yMeyO4 (Me=Cr, Co, Ni) spinels as cathodic materials for lithium-ion batteries10.1134/S1023193509020086 ↗
55. Structural electrochemical, and thermal aspects of Li[(Ni0.5Mn0.5)1−xCox]O2 (0≤x≤0.2) for high-voltage application of lithium-ion secondary batteries10.1149/1.2883733 ↗
56. Synthesis and characterization of LiNi0.6Mn0.4−xCoxO2 as cathode materials for Li-ion batteries10.1016/j.jpowsour.2008.12.046 ↗
57. Effects of metal ions on the structural and thermal stabilities of Li[Ni1−x−yCoxMny]O2 (x+y≤0.5) studied by in situ high temperature XRD10.1149/1.2988729 ↗
58. Layered mixed transition metal oxide cathodes with reduced cobalt content for lithium ion batteries10.1021/cm802316d ↗
59. Effects of Co doping on Li[Ni0.5CoxMn1.5−x]O4 spinel materials for 5V lithium secondary batteries via co-precipitation10.1016/j.jpowsour.2008.08.022 ↗
60. Effects of abundant Co doping on the structure and electrochemical characteristics of LiMn1.5Ni0.5−xCoxO410.1016/j.jelechem.2007.04.016 ↗
61. Electrochemical stress at high potential to investigate phase transitions in Li1.1(Ni1/3Mn1/3Co1/3)0.9O210.1149/1.3130042 ↗
62. Mechanisms associated with the “plateau” observed at high voltage for the overlithiated Li1.12(Ni0.425Mn0.425Co0.15)0.88O2 system10.1021/cm070435m ↗
63. Physical and electrochemical properties of spherical Li1+x(Ni1/3Co1/3Mn1/3)1−xO2 cathode materials10.1016/j.jpowsour.2007.10.062 ↗
64. Synthesis, structure, and electrochemical characteristics of overlithiated Li1+x(NizCo1−2zMnz)1−xO2 (z=0.1–0.4 and x=0.0–0.1) positive electrodes prepared by spray-drying method10.1149/1.2803523 ↗
65. Direct evidence of oxygen evolution from Li1+x(Ni1/3Mn1/3Co1/3)1−xO2 at high potentials10.1007/s10800-008-9491-9 ↗
66. First-cycle irreversibility of layered Li–Ni–Co–Mn oxide cathode in Li-ion batteries10.1016/j.electacta.2008.07.007 ↗
67. Synthesis and structural characterization of defect spinels in the lithium-manganese-oxide system10.1016/0025-5408(93)90142-Z ↗
68. Nano Li4Ti5O12–LiMn2O4 batteries with high power capability, improved cycle-life10.1016/j.jpowsour.2008.10.018 ↗
69. On the safety of the Li4Ti5O12/LiMn2O4 lithium-ion battery system10.1149/1.2783770 ↗
70. Electrochemical kinetics and safety of 2-volt class Li-ion battery system using lithium titanium oxide anode10.1149/1.3043441 ↗
71. Phase conversion and morphology evolution during hydrothermal preparation of orthorhombic LiMnO2 nanorods for lithium ion battery application10.1016/j.jpowsour.2007.03.077 ↗
72. Electrochemical and high temperature physicochemical properties of orthorhombic LiMnO210.1016/j.jpowsour.2007.05.054 ↗
73. Spinel electrodes for lithium batteries10.1111/j.1151-2916.1999.tb02250.x ↗
74. Deterioration estimation of lithium-ion cells in direct current power supply systems and characteristics of 400-Ah lithium-ion cells10.1016/j.jpowsour.2008.08.023 ↗
75. Capacity fading with oxygen loss for manganese spinels upon cycling at elevated temperatures10.1016/j.jpowsour.2008.02.071 ↗
76. Electrochemical performance and capacity fading reason of LiMn2O4/graphite batteries stored at room temperature10.1016/j.jpowsour.2008.08.044 ↗
77. Electrochemical AFM study of LiMn2O4 thin film electrodes exposed to elevated temperatures10.1016/j.jpowsour.2008.02.054 ↗
78. Physical and electrochemical properties of LiFe0.5Mn1.5O4 spinel synthesized by different methods10.1134/S102319350905019X ↗
79. Structure and electrochemical properties of LiFexMn2−xO4 (0≤x≤0.5) spinel as 5V electrode material for lithium batteries10.1149/1.1377593 ↗
80. Electrochemical investigations of cobalt-doped LiMn2O4 as cathode material for lithium-ion batteries10.1149/1.1838349 ↗
81. Enhanced capacity retention of Co and Li doubly doped LiMn2O410.1016/j.jpowsour.2008.09.104 ↗
82. Structural, magnetic and electrochemical properties of the spinel LiMn2−yCoyO4 nanosized powders
83. Sucrose-aided combustion synthesis of nanosized LiMn1.99−yLiyM0.01O4 (M=Al3+, Ni2+, Cr3+, Co3+, y=0.01 and 0.06) spinels. Characterization and electrochemical behavior at 25 and at 55°C in rechargeable lithium cells10.1016/j.jpowsour.2009.02.026 ↗
84. Electrochemical properties of spinel LiCoxMn2−xO4 prepared by sol–gel process10.1016/j.jallcom.2008.06.157 ↗
85. Electrochemical study on LiCo1/6Mn11/6O4 as cathode material for lithium ion batteries at elevated temperature10.1016/j.jpowsour.2007.12.043 ↗
86. Solid-state redox potentials for Li[Me1/2Mn3/2]O4 (Me: 3d-transition metal) having spinel-framework structures: a series of 5 volt materials for advanced lithium-ion batteries10.1016/S0378-7753(99)00246-3 ↗
87. Reassessment of the electronic-conduction behavior above Verwey-like transition of Ni2+- and Al3+-doped LiMn2O410.1111/j.1551-2916.2007.02148.x ↗
88. High voltage spinel oxides for Li-ion batteries: From the material research to the application10.1016/j.jpowsour.2008.08.043 ↗
89. In situ XAFS study of the effect of dopants in Li1+xNi(1−3x)/2Mn(3+x)/204 (0≤x≤1/3), a Li-ion battery cathode material10.1149/1.2976351 ↗
90. Nano-LiNi0.5Mn1.5O4 spinel: a high power electrode for Li-ion batteries10.1039/b806662k ↗
91. Understanding the improvement in the electrochemical properties of surface modified 5V LiMn1.42Ni0.42Co0.16O4 spinel cathodes in lithium-ion cells10.1021/cm9000043 ↗
92. Preparation, characteristics and electrochemical properties of surface-modified LiMn2O4 by doped LiNi0.05Mn1.95O410.1016/j.apsusc.2008.07.069 ↗
93. Effect of LiNi1/2Mn1/2O2 coating on the electrochemical performance of Li-Mn spinel10.1016/j.elecom.2009.03.017 ↗
94. LiMn2O4 active material with high capacity retention10.1016/j.apsusc.2007.04.070 ↗
95. M.B. Sahana, C. Sudakar, C. Thapa, V.M. Naik, G.W. Auner, R. Naik, K.R. Padmanabh, The effect of titanium on the lithium intercalation capacity of V2O5 thin films, Thin Solid Film, in press, doi:10.1016/j.tsf.2009.04.063.10.1016/j.tsf.2009.04.063 ↗
96. Environmentally friendly chemical route to vanadium oxide single-crystalline nanobelts as a cathode material for lithium-ion batteries10.1021/jp060904s ↗
97. Synthesis of spherical porous vanadium pentoxide and its electrochemical properties10.1016/j.jpowsour.2008.04.049 ↗
98. V.M. Mohan, B. Hu, W. Qiu, W. Chen, Synthesis, structural, and electrochemical performance of V2O5 nanotubes as cathode material for lithium battery, J. Appl. Electrochem., in press, doi:10.1007/s10800-009-9910-6.10.1007/s10800-009-9910-6 ↗
99. Nanostuctures vanadium oxide electrodes for enahnced lithium-ion intercalation10.1002/adfm.200500662 ↗
100. Lithium site preference and electronic structure of Li4V3O810.1103/PhysRevB.56.10707 ↗