journal article·2016-07

Vessel microstructure design: A new approach for site-specific core-shell micromechanical tailoring of TRIP-assisted ultra-high strength steels

M. Belde, H. Springer, D. Raabe

Acta Materialia· Volume 113
Publisher page

Abstract

Abstract The mechanical performance of multi-phase steel microstructures critically depends on the constituents’ chemical and morphological constitutions, which in combination determine the composite hardness, the onset of plasticity, internal load and strain-partitioning, as well as the stability and transformation kinetics of retained austenite in case of TRIP steels. The novel approach of utilising temporary vessel phases, hence termed vessel microstructure design, enables the tuning of constituent phase properties by linking their formation to a controllable landscape of chemical gradients. This approach hinges on the introduction of alloy carbides as a temporary container, or ‘vessel’ phase, deliberately producing localised enrichment of alloying elements in a structure predetermined by preliminary heat treatments, referred to as conditioning and accumulation stages. These vessel carbides, which act as reservoirs for specific alloying elements, are then partially dissolved through flash heating, leading to a self-organising landscape of alloying elements in the vicinity of the dissolving particles. The resulting three- or multiple phase microstructures then consist of confined laminates incorporating retained carbides, enveloped by retained austenite shells, embedded within a martensitic matrix. Such complex yet entirely self-organized microstructures offer unique opportunities for strain and load partitioning which we refer to as core-shell micromechanics. Different variants of these core-shell composite structures are produced and examined together with reference microstructures by tensile testing, hardness mappings, impact toughness, X-ray measurements, as well as by electron microscopy. It is found that these novel microstructures, when tempered, exhibit ultra-high strength and delayed necking, enabled by a combination of gradual strain-hardening and transformation-induced plasticity that is tuneable via control of the initial carbide structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels10.1016/j.actamat.2007.08.040 ↗
2. Addressing retained austenite stability in advanced high strength steels10.4028/www.scientific.net/MSF.738-739.212 ↗
3. Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel10.1016/j.msea.2014.07.054 ↗
4. The enhancement of ductility in high-strength steels
5. Smaller is less stable: size effects on twinning vs. transformation of reverted austenite in TRIP-maraging steels10.1016/j.actamat.2014.07.020 ↗
6. Stability of retained austenite in multi-phase microstructure during austempering and its effect on the ductility of a low carbon steel10.1016/j.msea.2014.02.059 ↗
7. The influence of starting microstructure on the retention and mechanical stability of austenite in an intercritically annealed-low alloy dual-phase steel10.1007/BF02646215 ↗
8. Nanoscale austenite reversion through partitioning, segregation and kinetic freezing: example of a ductile 2GPa Fe–Cr–C steel10.1016/j.actamat.2012.01.045 ↗
9. On the role of martensitic transformation on damage and cracking resistance in TRIP-assisted multiphase steels10.1016/S1359-6454(00)00215-9 ↗
10. Structure–properties relationship in TRIP steels containing carbide-free bainite10.1016/j.cossms.2004.10.002 ↗
11. Carbon partitioning into austenite after martensite transformation10.1016/S1359-6454(03)00059-4 ↗
12. Quenching and partitioning treatment of a low-carbon martensitic stainless steel10.1016/j.msea.2011.10.125 ↗
13. Quenching and partitioning (Q&P) processing of martensitic stainless steels10.1007/s11661-012-1420-1 ↗
14. Bulk combinatorial design of ductile martensitic stainless steels through confined martensite-to-austenite reversion10.1016/j.msea.2013.06.036 ↗
15. A new effect of retained austenite on ductility enhancement in high-strength quenching–partitioning–tempering martensitic steel10.1016/j.msea.2011.07.049 ↗
16. Quenching and partitioning martensite – a novel steel heat treatment10.1016/j.msea.2006.02.133 ↗
17. Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel10.1016/j.actamat.2011.06.014 ↗
18. Microstructure and mechanical properties of C–Si–Mn (–Nb) TRIP steels after simulated thermomechanical processing10.1179/026708301101509917 ↗
19. The recent development of steels with carbide-free acicular microstructures containing retained austenite
20. The effect of size and shape of austenite grains on the mechanical properties of a low-alloyed TRIP steel10.1002/srin.201200026 ↗
21. Stability of retained austenite in a Nb microalloyed Mn–Si TRIP steel10.4028/www.scientific.net/MSF.284-286.253 ↗
22. Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels10.1016/j.actamat.2006.12.001 ↗
23. TRIP and its kinetic aspects in austempered 0.4C–1.5Si–0.8Mn steel10.1016/0036-9748(87)90103-7 ↗
24. Stabilization mechanisms of retained austenite in transformation-induced plasticity steel10.1007/s11661-001-0240-5 ↗
25. Thermal and mechanical stability of retained austenite in aluminum-containing multiphase TRIP steels10.2355/isijinternational.42.1565 ↗
26. Multiphase microstructures via confined precipitation and dissolution of vessel phases: example of austenite in martensitic steel10.1016/j.actamat.2014.11.025 ↗
27. Kinetics of austenite formation from a spheroidized ferrite-carbide aggregate
28. Formation of austenite and dissolution of carbides in Fe–8.2Cr–C alloys
29. Effects of Mn, Si and Cr addition on reverse transformation at 1073K from spheroidized cementite structure in Fe–0.6 mass% C alloy10.1016/j.actamat.2010.04.045 ↗
30. MAUD (material analysis using diffraction): a user friendly java program for Rietveld texture analysis and more
31. Jatczak · 1980
32. Deformation and fracture in martensitic carbon steels tempered at low temperatures10.1007/s11661-001-0344-y ↗
33. Atomic-scale analysis of carbon partitioning between martensite and austenite by atom probe tomography and correlative transmission electron microscopy10.1016/j.actamat.2013.10.064 ↗
34. Carbon partitioning during quenching and partitioning heat treatment accompanied by carbide precipitation10.1016/j.actamat.2014.11.049 ↗
35. Strengthening steel by austenite grain refinement
36. Effect of grain refinement to 1μm on strength and toughness of dual-phase steels10.1016/j.msea.2010.08.062 ↗
37. Phase transformation from fine-grained austenite10.2355/isijinternational.48.1038 ↗
38. Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu10.1016/j.scriptamat.2008.05.031 ↗
39. TRIP-assisted steels?10.2355/isijinternational.42.1059 ↗
40. Effect of grain size on thermal and mechanical stability of austenite in metastable austenitic stainless steel10.2355/isijinternational.53.1224 ↗
41. Bhadeshia · 2011
42. Austenite stability effects on tensile behavior of manganese-enriched-austenite transformation-induced plasticity steel10.1007/s11661-011-0687-y ↗
43. De Moor · Metall. Mater. Trans. A · 2008 · 39A · 2568
44. Influence of alloying elements on the kinetics of strain-induced martensitic nucleation in low-alloy, multiphase high-strength steels10.1007/s11661-006-0157-0 ↗
45. Design of a novel Mn-based 1GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability10.1016/j.actamat.2011.04.011 ↗
46. Influences of particle size and interface energy on the stress concentration induced by the oblate spheroidal particle and the void nucleation mechanism10.1016/j.ijsolstr.2005.04.015 ↗
47. The rapid heat treatment of steel10.1007/BF02662639 ↗
48. Analysis of banded morphology in multiphase steels based on a discrete dislocation–transformation model10.1088/0965-0393/19/7/074006 ↗
49. Nanolaminate transformation-induced plasticity-twinning-induced plasticity steel with dynamic strain partitioning and enhanced damage resistance10.1016/j.actamat.2014.11.010 ↗
50. Effect of alloying elements on defect structure and hardness of M23C6 type carbides10.2320/matertrans1960.20.585 ↗
51. Comparison of nano-indentation hardness to microhardness10.1016/j.surfcoat.2004.07.108 ↗
52. Krauss · 1992 · 295
53. Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation10.1016/j.cossms.2004.09.003 ↗