journal article·2004-10

Effect of Surface Roughness on Retention of Reverse Osmosis Membranes

S.S. Madaeni

Journal of Porous Materials· Volume 11· Issue 4
Publisher page

Abstract

The performances of two commercially available Thin Film Composite reverse osmosis membranes i.e. TFC-ULP and TFC-SR2 from Fluid Systems were studied. For the TFC-ULP membrane low water flux (around 7 lit/m2·h) and high ion retention (around 70%) were obtained. However the TFC-SR2 membrane showed much higher flux (90 lit/m2·h) and much lower retention (around 15%). Unlike the common membranes, TFC-ULP and TFC-SR2 membranes are composed of three layers. The skin layers of both membranes are made from polyvinyl alcohol and the two support layers are made from poly aryl sulfur ether and polyester. However contradictory behaviors of the membranes cannot be explained by the characteristics of materials used for membrane preparation and/or membrane morphology. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) revealed that the TFC-ULP membrane possesses a rough surface while the TFC-SR2 membrane predominantly has a smooth surface. Contradictory membrane performances may be due to higher trapping of the ions on the rough surface of TFC-ULP membrane resulting in higher retention. The deposition causes higher resistance against the flow leading to lower flux. The smooth surface of the TFC-SR2 membrane has less ability to trap the ions resulting in lower retention, lower resistance against the flow and therefore higher flux.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Membrane Separation Technologies · Microfluidic and Capillary Electrophoresis Applications · Nanopore and Nanochannel Transport Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. D.L. Cho and O. Ekengren, Journal of Applied Polymer Science 47(12), 2125 (1993).10.1002/app.1993.070471206 ↗
2. A.G. Fane, C.J.D. Fell, and K.J. Kim, Desalination 53, 37 (1985).10.1016/0011-9164(85)85051-7 ↗
3. K.J. Kim, A.G. Fane, and C.J.D. Fell, Journal of Membrane Science 43 187 (1989).10.1016/S0376-7388(00)85097-8 ↗
4. W.S.W. Ho and K.K. Sirkar, Membrane Handbook,Van Nos-trand Reinhold.
5. A.J.B. Van Boxtel, IDF Special Issue 9504, 93 (1995).
6. W.R. Bowen, T.A. Doneva, and H.B. Yin, Desalination 146, 97 (2002).10.1016/S0011-9164(02)00496-4 ↗
7. N. Hilal and W.R. Bowen, Desalination 150, 289 (2002).10.1016/S0011-9164(02)00985-2 ↗
8. W.R. Bowen, T.A. Doneva, J. Austin, and G. Stoton, Colloids and Surfaces B: Biointerfaces 27, 103 (2002).10.1016/S0927-7765(02)00045-0 ↗
9. W.R. Bowen, T.A. Doneva, J. Austin, and G. Stoton, Colloids and Surfaces A: Physicochemical and Engineering Aspects 201, 73 (2002).10.1016/S0927-7757(01)00790-7 ↗
10. J.A.D. Jensen, P.O.A. Persson, K. Pantleon, M. Oden, L. Hultman, and M.A.J. Somers, Surface and Coatings Technol-ogy 172, 79 (2003).10.1016/S0257-8972(03)00253-6 ↗
11. S.S. Madaeni, Characterization and manufacturing of reverse os-mosis membranes based on polyamide (1999) Scientific Report, Bisouton Power Plant, Kermanshah, Iran.
12. W.R. Bowen and T.A. Doneva, Journal of Colloid and Interface Science 229, 544 (2000).10.1006/jcis.2000.6997 ↗