Preparation and characterization of highly porous Yb2SiO5 ceramics using water-based freeze-casting
Source abstract
Abstract
This study introduces a new, highly porous Yb2SiO5 ceramic prepared using a water-based freeze-casting technique. The prepared porous Yb2SiO5 ceramic had ultra-high porosity (82–86 %) and tailored pore structures. The effects of sintering temperature on the pore structure, thermal conductivity, and mechanical properties of these ceramics were investigated. The sample with 15 vol% solid content prepared at 1450 °C had ultra-low linear shrinkage (4.85 %), ultra-high porosity (83.95 %), high compressive strength (2.15 MPa), and low thermal conductivity (0.121 W/m K). In addition, this sample showed a relatively high compressive strength (1.15 MPa) at 1500 °C. These results highlight the potential application of highly porous Yb2SiO5 ceramics as thermal insulator materials in ultra-high temperature environments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. A.L. Yurkov, L.M. Aksel’rod, Refract. Ind. Ceram 46, 170 (2005)10.1007/s11148-005-0077-3 ↗
2. Y.N. Kryuchkov, V.P. Mineev, S.V. Troyanskaya, V.V. Tkach, Glass Ceram. 56, 158 (1999)10.1007/BF02681324 ↗
3. X.M. Li, P.T. Wu, D.L. Zhu, Int. J. Refract. Met. Hard Mater. 41, 437 (2013)10.1016/j.ijrmhm.2013.05.020 ↗
4. G.H. Liu, Q.S. Wang, J.T. Li, Y.X. Chen, B. He, Int. J. Refract. Met. Hard Mater 41, 622 (2013)10.1016/j.ijrmhm.2013.04.015 ↗
5. L.L. Gong, Y.H. Wang, X.D. Cheng, R.F. Zhang, H.P. Zhang, Int. J. Heat Mass Transf. 67, 253 (2013)10.1016/j.ijheatmasstransfer.2013.08.008 ↗
6. L.F. Hu, C.A. Wang, Y. Huang, J. Eur. Ceram. Soc. 31, 2915 (2011)10.1016/j.jeurceramsoc.2011.07.014 ↗
7. H.F. Chen, Y.F. Gao, Y. Liu, H.J. Luo, Inorg. Chem. 49, 1942 (2010)10.1021/ic9023585 ↗
8. K.N. Lee, Surf. Coat. Technol. 133–134, 1 (2000)
9. N.S. Jacobson, D.S. Fox, J.L. Smialek, E.J. Opila, C. Dellacorte, K.N. Lee, in ASM Handbook, vol. 13B, ed. by S.D. Cramer, B.S. Covino, Jr, (ASM International, Materials Park, 2005), p. 56510.31399/asm.hb.v13b.a0003842 ↗
10. H.M. Xiang, Z.H. Feng, Y.C. Zhou, J. Mater. Res. 29, 1609 (2014)10.1557/jmr.2014.201 ↗
11. W.L. Li, K. Lu, J.Y. Walz, Int. Mater. Rev. 57, 37 (2012)10.1179/1743280411Y.0000000011 ↗
12. S. Deville, E. Saiz, R.K. Nalla, A.P. Tomsia, Science 311, 515 (2006)10.1126/science.1120937 ↗
13. R.B. Zhang, D.N. Fang, Y.M. Pei, L.C. Zhou, Ceram. Int. 38, 4373 (2012)10.1016/j.ceramint.2012.01.012 ↗
14. S. Deville, Adv. Eng. Mater. 10, 155 (2008)10.1002/adem.200700270 ↗
15. R.B. Zhang, D.N. Fang, X.M. Chen, Y.M. Pei, Z.D. Wang, Y.S. Wang, Mater. Des. 46, 746 (2013)10.1016/j.matdes.2012.11.020 ↗
16. R.B. Zhang, B.Y. Han, D.N. Fang, Y.S. Wang, Ceram. Int. 41, 11517 (2015)10.1016/j.ceramint.2015.05.099 ↗
17. GB/T 8489-2006, Standardization administration of the People’s Republic of China, 2006
18. R.B. Zhang, X.M. Cheng, D.N. Fang, L.L. Ke, Y.S. Wang, Mater. Des. 52, 17 (2013)10.1016/j.matdes.2013.05.045 ↗
19. G. Liu, D. Zhang, C. Meggs, T.W. Button, Scr. Mater. 62, 466 (2010)10.1016/j.scriptamat.2009.12.018 ↗
20. E. Munch, J. Franco, S. Deville, P. Hunger, E. Saiz, A.P. Tomsia, JOM 60, 54 (2008)10.1007/s11837-008-0072-5 ↗
21. S. Deville, E. Saiz, A.P. Tomsia, Acta Mater. 55, 1967 (2007)10.1016/j.actamat.2006.11.003 ↗
22. Z.Q. Sun, M.S. Li, Y.C. Zhou, Thermal properties of single-phase Y2SiO5. J. Eur. Ceram. Soc. 29, 551 (2009)10.1016/j.jeurceramsoc.2008.07.026 ↗
23. Y. Han, C.W. Li, C. Bian, S.B. Li, C.A. Wang, J. Eur. Ceram. Soc. 33, 2573 (2013)10.1016/j.jeurceramsoc.2013.04.006 ↗