CO2 adsorption behavior and kinetics on polyethylenimine modified porous phenolic resin
Source abstract
Abstract
The commercial porous phenolic resins (XAD-761) were selected as the support material for loading PEI to prepare solid amine adsorbents. The CO2 adsorption performances of the solid amine adsorbent was evaluated. The experimental results showed that when the PEI loading amount was 40 wt% on XAD-761, the CO2 adsorption amount could reach up to 3.85 mmol/g at 25 °C under dry condition. Meanwhile, the CO2 adsorption capacity declined as the temperature continuously raised, for the reaction between CO2 and amine groups was an exothermic reaction. The existence of water improved the utilization efficiency of amine groups on the adsorbents and finally lead to a great promoting of the CO2 adsorption amount. The kinetics study showed that Avrami kinetic model fitted better than the pseudo-first order and the pseudo-second order kinetic models for CO2 adsorption, suggesting that both physisorption and chemisorption were involved in the CO2 adsorption process of the prepared adsorbent. Moreover, the adsorbent exhibited good stability after five adsorption–desorption cycles. All these results indicated that this solid amine adsorbent has a high potential for CO2 capture and separation from flue gas.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Dioxide Capture Technologies · Membrane Separation and Gas Transport · Phase Equilibria and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. C.V. Pramod, K. Upendar, V. Mohan, D.S. Sarma, G.M. Dhar, J. CO2 Util. 12, 109 (2015)10.1016/j.jcou.2015.05.002 ↗
2. M. Irani, K.A.M. Gasem, B. Dutcher, M. Fan, Fuel 183, 601 (2016)10.1016/j.fuel.2016.06.129 ↗
3. F. Chu, L. Yang, X. Du, Y. Yang, Energy 109, 495 (2016)10.1016/j.energy.2016.04.123 ↗
4. S.Y. Oh, M. Binns, H. Cho, J.K. Kim, Appl. Energy 169, 353 (2016)10.1016/j.apenergy.2016.02.046 ↗
5. L. Wang, M. Yao, X. Hu, G. Hu, J. Lu, Appl. Surf. Sci 324, 286 (2015)10.1016/j.apsusc.2014.10.135 ↗
6. H. Zhang, A. Goeppert, G.K.S. Prakash, G.A. Olah, RSC Adv. 5, 52550 (2015)10.1039/C5RA05428A ↗
7. S. Ahmed, A. Ramli, S. Yusup, Int. J. Greenhouse Gas Control 51, 230 (2016)10.1016/j.ijggc.2016.05.021 ↗
8. A. Heydarigorji, Y. Yang, A. Sayari, Energy Fuels 25, 4206 (2011)10.1021/ef200765f ↗
9. F. Martínez, R. Sanz, G. Orcajo, D. Briones, V. Yángüez, Chem. Eng. Sci. 142, 55 (2016)10.1016/j.ces.2015.11.033 ↗
10. J. Yu, P.B. Balbuena, J. Phys. Chem. C 117, 3383 (2013)10.1021/jp311118x ↗
11. D. Wang, X. Ma, C. Sentorunshalaby, C. Song, Ind. Eng. Chem. Res. 51, 3048 (2012)10.1021/ie2022543 ↗
12. D. Lin, X. Zhang, X. Cui, W. Chen, RSC Adv. 4, 27414 (2014)10.1039/c4ra04545a ↗
13. R. Ullah, M. Atilhan, B. Anaya, S. Al-Muntaseb, S. Aparicio, D. Thirion, C.T. Yavuz, RSC Adv. 6, 66324 (2016)10.1039/C6RA13655A ↗
14. S. Sung, M.P. Suh, J. Mater. Chem. A 2, 13245 (2014)10.1039/C4TA02861A ↗
15. L.B. Sun, Y.H. Kang, Y.Q. Shi, Y. Jiang, X.Q. Liu, ACS Sustain. Chem. Eng. 3, 3077 (2015)10.1021/acssuschemeng.5b00544 ↗
16. P. Puthiaraj, W.S. Ahn, Ind. Eng. Chem. Res. 55, 7917 (2016)10.1021/acs.iecr.5b03963 ↗
17. Y.Q. Shi, J. Zhu, X.Q. Liu, J.C. Geng, L.B. Sun, ACS Appl. Mater. Interfaces 6, 20340 (2014)10.1021/am505851u ↗
18. Q. Yang, M. Zhao, L. Lin, Food Chem. 194, 900 (2016)10.1016/j.foodchem.2015.08.070 ↗
19. S. Xiao, Y. Wu, J. Wu, X. Wang, J. Xiao, Ind. Eng. Chem. Res. 54, 11151 (2015)10.1021/acs.iecr.5b03517 ↗
20. F. Song, Q. Zhong, J. Ding, Y. Zhao, Y. Bu, RSC Adv. 3, 23785 (2013)10.1039/c3ra42998a ↗
21. J. Wang, M. Wang, B. Zhao, W. Qiao, D. Long, L. Ling, Ind. Eng. Chem. Res. 52, 5437 (2013)10.1021/ie303388h ↗
22. Z. Chen, S. Deng, H. Wei, B. Wang, J. Huang, G. Yu, ACS Appl. Mater. Interfaces 5, 6837 (2013)10.1021/am402066t ↗
23. J. Zhu, Q. Chen, Z. Sui, L. Pan, J. Yu, B. Han, J. Mater. Chem. A 2, 16181 (2014)10.1039/C4TA01537A ↗
24. R. Balgis, S. Sago, G.M. Anilkumar, T. Ogi, K. Okuyama, ACS Appl. Mater. Interfaces 5, 11944 (2013)10.1021/am403695u ↗
25. X.L. Yan, L. Zhang, Y. Zhang, G.D. Yang, Z.F. Yan, Ind. Eng. Chem. Res. 50, 3220 (2016)10.1021/ie101240d ↗
26. Z.Y. Liu, D. Pudasainee, Q.X. Liu, R. Gupta, Sep. Pur. Technol. 156, 259 (2015)10.1016/j.seppur.2015.10.009 ↗
27. Y.M. Liu, J. Shi, J. Chen, Q. Ye, H. Pan, Z.H. Shao, Y. Shi, Microporous Mesoporous Mater. 134, 16 (2010)10.1016/j.micromeso.2010.05.002 ↗
28. X.X. Wang, C.S. Song, A.M. Gaffney, R.Z. Song, Catal. Today 238, 95 (2014)10.1016/j.cattod.2014.02.022 ↗
29. W. Zhang, H. Liu, C. Sun, T.C. Drage, C.E. Snape, Chem. Eng. J. 251, 293 (2014)10.1016/j.cej.2014.04.063 ↗
30. Y. Jing, L. Wei, Y. Wang, Y. Yu, Microporous Mesoporous Mater. 183, 124 (2014)10.1016/j.micromeso.2013.09.008 ↗
31. Q. Wu, S. Chen, H. Liu, RSC Adv. 4, 27176 (2014)10.1039/c4ra01232a ↗
32. J. Yu, Y. Le, B. Cheng, RSC Adv. 2, 6784 (2012)10.1039/c2ra21017g ↗
33. S. Loganathan, M. Tikmani, A. Mishra, A.K. Ghoshal, Chem. Eng. J. 303, 88 (2016)10.1016/j.cej.2016.05.106 ↗
34. X. Wang, Q. Guo, J. Zhao, L. Chen, Int. J. Greenhouse Gas Control 37, 90 (2015)10.1016/j.ijggc.2015.03.018 ↗