journal article·2018-04Open access

Novel deformation-induced polymorphic crystallization and softening of Al-based amorphous alloys

H.W. Bi, A. Inoue, F.F. Han, Y. Han, F.L. Kong, S.L. Zhu, E. Shalaan, F. Al-Marzouki, A.L. Greer

Acta Materialia· Volume 147

Abstract

Melt-spun amorphous ribbons of Al90Y10 (at.%) (90Al) and Al84Y8.5Ni4Co2Pd1Fe0.5 (84Al) are cold-rolled at near to liquid-nitrogen temperature or at room temperature, inducing partial crystallization to nanoscale fcc-Al (α-Al). The crystallization is characterized and contrasted with the distinct sequences of reactions on annealing 90Al and 84Al amorphous alloys. Rolling-induced crystallization leads to softening, opposite to the effect of nanocrystallization induced by annealing. The origins of the hardness changes are analyzed. The rolling induces novel polymorphic crystallization to α-Al with extended solid solubility. This transformation, which occurs equally in 84Al and 90Al, despite the much greater thermal stability of the former, allows the ribbons to retain good bending ductility, and delays the onset of embrittlement on subsequent annealing. Partial crystallization induced by cold-rolling is useful in avoiding the formation of compound phases associated with brittleness, and is a promising process for high-solute Al-based amorphous alloys to be further developed as structural materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Quasicrystal Structures and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Al-Ge-(Cr or Mn) and Al-Si-(Cr or Mn) quasicrystals with high metalloid concentration prepared by rapid quenching10.1007/BF01729009 ↗
2. Ductile aluminium-base amorphous alloys with two separate phases10.1007/BF01728983 ↗
3. Aluminum-based amorphous alloys with tensile strength above 980 MPa (100 kg/mm2)10.1143/JJAP.27.L479 ↗
4. Synthesis and properties of metallic glasses that contain aluminum10.1126/science.241.4873.1640 ↗
5. Al-Ni-Y-Co amorphous alloys with high mechanical strengths, wide supercooled liquid region and large glass-forming capacity10.2320/matertrans1989.31.493 ↗
6. Ultrahigh strength Al-based amorphous alloys containing Sc10.1557/JMR.2004.0206 ↗
7. Analysis of nanocrystal development in Al-Y-Fe and Al-Sm glasses10.1016/1359-6462(96)00196-0 ↗
8. Nanocrystal development during primary crystallization of amorphous alloys10.1016/S1359-6454(97)00279-6 ↗
9. Al-based nanocrystalline composites by rapid solidification of Al-Ni-Sm alloys10.1016/S0965-9773(98)00079-8 ↗
10. Primary crystallization in amorphous Al-based alloys10.1016/S0022-3093(02)01983-X ↗
11. Novel heating-induced reversion during crystallization of Al-based glassy alloys
12. Comparative study of the effect of cold rolling on the structure of Al–RE–Ni–Co (RE=rare-earth metals) amorphous and glassy alloys10.1016/j.jnoncrysol.2006.06.022 ↗
13. Effect of cold-rolling on the crystallization behavior of amorphous Al88Y7Fe5 alloy10.1016/j.msea.2003.10.059 ↗
14. Crystallization behavior of amorphous Al90Y10 and Al88Y12 alloys10.1016/0167-577X(95)00067-4 ↗
15. Formation of nanocrystals in an amorphous Al90Y10 alloy10.1016/j.matchar.2017.09.030 ↗
16. Ultrahigh tensile strengths of Al88Y2Ni9M1 (M=Mn or Fe) amorphous alloys containing finely dispersed fcc-Al particles10.2320/matertrans1989.31.747 ↗
17. Deformation-induced nanocrystal formation in shear bands of amorphous alloys10.1038/367541a0 ↗
18. Deformation-induced nanocrystal precipitation in Al-base metallic glasses10.2320/matertrans.42.1741 ↗
19. Glass formation versus nanocrystallization in an Al92Sm8 alloy10.1016/S1359-6462(99)00029-9 ↗
20. Amorphization of Al-Cu-Fe quasicrystalline alloys by mechanical milling10.1016/0925-8388(96)02250-5 ↗
21. Development of amorphous and nanocrystalline Al65Cu35−xZrx alloys by mechanical alloying10.1016/j.msea.2004.03.010 ↗
22. Crystallization features in Al90Y10 amorphous alloy under a various external influence10.1016/j.matlet.2014.07.013 ↗
23. Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems10.1016/S0079-6425(98)00005-X ↗
24. Phases formed during crystallization of amorphous Al84Y9Ni5Co2 alloy10.1016/S0022-3093(00)00135-6 ↗
25. Softening caused by profuse shear banding in a bulk metallic glass10.1103/PhysRevLett.96.105503 ↗
26. Thermomechanical processing of metallic glasses: extending the range of the glassy state10.1038/natrevmats.2016.39 ↗
27. Structural stability of amorphous metals10.1016/0025-5416(76)90183-X ↗
28. Metallic glasses
29. Irradiation resistance of multicomponent alloys10.1007/s11661-013-1994-2 ↗
30. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
31. Formation and chemistry of nanocrystalline phases formed during deformation in aluminum-rich metallic glasses10.1016/S0965-9773(97)90068-4 ↗
32. Solute trapping in aluminum alloys10.1016/0956-7151(94)90483-9 ↗
33. Real-time, high-resolution study of nanocrystallization and fatigue cracking in a cyclically strained metallic glass10.1073/pnas.1320235110 ↗
34. Stress-driven crystallization via shear-diffusion transformations in a metallic glass at very low temperatures10.1103/PhysRevB.91.214103 ↗
35. Stored energy in metallic glasses due to strains within the elastic limit10.1080/14786435.2016.1177231 ↗
36. Relationship between structure, dynamics, and mechanical properties in metallic glass-forming alloys10.1103/PhysRevB.78.014207 ↗
37. Crystallization-induced plasticity of Cu–Zr containing bulk amorphous alloys10.1016/j.actamat.2005.09.007 ↗
38. On the anelasticity and strain induced structural changes in a Zr-based bulk metallic glass10.1063/1.3655999 ↗
39. Mechanical properties of partially crystallized aluminum based metallic glasses10.1016/0956-716X(91)90426-2 ↗
40. Solute partitioning in partially crystallized Al-Ni-Ce(-Cu) metallic glasses10.1016/S0956-716X(99)80035-1 ↗
41. Increase in mechanical strength of Al-Ni-Y amorphous alloys by dispersion of nanoscale fcc-Al particles10.2320/matertrans1989.32.331 ↗
42. Crystallization and high mechanical strength of Al-based amorphous alloys10.2320/matertrans1989.35.293 ↗
43. Homogeneous deformation of Zr–Ti–Al–Cu–Ni bulk metallic glasses10.1016/j.intermet.2004.04.019 ↗
44. Nanocrystallization in Al-based amorphous alloys10.1080/01418639708241116 ↗
45. Microstructure and hardening of Al-based nanophase composites10.1016/S0921-5093(97)80062-7 ↗
46. Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling10.1016/j.actamat.2006.05.018 ↗
47. Work hardening and inherent plastic instability of nanocrystalline metals10.1002/pssr.201004095 ↗
48. Structural relaxation in metallic glasses10.1111/j.1749-6632.1981.tb55454.x ↗
49. Rejuvenation of metallic glasses by non-affine thermal strain10.1038/nature14674 ↗