journal article·2015-01

The as-deposited structure of co-sputtered Cu–Ta alloys, studied by X-ray diffraction and molecular dynamics simulations

Claudia M. Müller, Stefan Parviainen, Flyura Djurabekova, Kai Nordlund, Ralph Spolenak

Acta Materialia· Volume 82
Publisher page

Abstract

Abstract In this study a direct comparison between lattice spacings predicted by molecular dynamics (MD) simulations and values measured from sputtered Cu–Ta films by X-ray diffraction (XRD) is reported. The study spans the entire composition range between pure Cu and pure Ta and takes into account all the phases documented for the Cu–Ta system in the literature (i.e. α-Cu, α-Ta, β-Ta as well as X-ray amorphous structures). For both the experiments and the MD simulations the results are compared to the literature and discrepancies are critically discussed. A direct comparison between simulation and experiments shows that the MD simulations reproduce the interatomic distances observed in the experiments accurately over most of the composition range, with the exception of alloys with 15–30 at.% Ta content where the MD simulations show spontaneous amorphization whereas the experiments suggest that Ta-rich particles are formed in face-centered cubic solid-solution phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Cu-Ta · 1994 · vol. IV/5
2. de Boer · 1989
3. Molecular dynamics simulations of Cu/Ta and Ta/Cu thin film growth10.1023/B:JCAD.0000036802.46424.ee ↗
4. C.H. Lee, S.H. Lee, J.S. Kim, Y.S. Kwon, Mechanical alloying effect in immiscible Cu-based alloy systems. Korus 2003: 7th Korea-Russia International Symposium on Science and Technology, Vol. 1 Proceedings 2003. p. 42.
5. Effect of milling temperature on mechanical alloying in the immiscible Cu-Ta system10.1007/s11661-997-0218-z ↗
6. Amorphous alloy film formed in an immiscible Cu-Ta system by ion beam assisted deposition10.1016/S0167-577X(01)00450-5 ↗
7. Metastable phase formation in an immiscible Cu-Ta system studied by ion-beam mixing, ab initio calculation, and molecular dynamics simulation10.1016/S1359-6454(03)00213-1 ↗
8. Stability of amorphous Cu-Ta and Cu-W alloys10.1063/1.335855 ↗
9. Roles of temperature and humidity in the oxidation of sputter-deposited Cu-Ta alloys in air10.1016/S0010-938X(01)00064-6 ↗
10. Elastic modulus and hardness of Cu-Ta amorphous films10.1016/j.jallcom.2004.06.077 ↗
11. Phases in sputter-deposited Cu-Ta alloys10.1016/0921-5093(92)90153-R ↗
12. Oxidation behavior of sputter-deposited Cu-Ta alloys in air10.1016/S0921-5093(96)10820-0 ↗
13. Surface characterization of sputter-deposited Cu-Ta alloys by Auger electron spectroscopy
14. Novel approaches to multiscale modelling in materials science10.1179/1743280410Y.0000000002 ↗
15. Million atom molecular dynamics simulations of materials on parallel computers10.1016/S1359-0286(96)80113-6 ↗
16. Semiempirical, quantum-mechanical calculation of hydrogen embrittlement in metals10.1103/PhysRevLett.50.1285 ↗
17. Embedded-atom method—derivation and application to impurities, surfaces, and other defects in metals10.1103/PhysRevB.29.6443 ↗
18. The embedded-atom method—a review of theory and applications10.1016/0920-2307(93)90001-U ↗
19. Molecular dynamics study of Cu thin film deposition on beta-Ta
20. Microstructure of a Cu film grown on bcc Ta (100) by large-scale molecular-dynamics simulations10.1103/PhysRevB.81.045410 ↗
21. Microstructure and shear strength of a Cu-Ta interface10.1016/S0927-0256(00)00173-7 ↗
22. Interfaces in copper nanoconnections10.1116/1.1510529 ↗
23. Atomic assembly of Cu/Ta multilayers: surface roughness, grain structure, misfit dislocations, and amorphization10.1063/1.2968240 ↗
24. Molecular dynamics simulation of copper thin film growth on beta-Ta (002) substrate
25. Atomistic modeling of solid-state amorphization in an immiscible Cu-Ta system10.1103/PhysRevB.66.104204 ↗
26. Interface stability and solid-state amorphization in an immiscible Cu-Ta system10.1063/1.1630353 ↗
27. Construction of an N-body Cu-Ta potential and study of interfacial behavior between immiscible Cu and Ta through molecular dynamics simulation10.1143/JPSJ.72.5 ↗
28. Amorphous alloy formation in immiscible Cu-Ta and Cu-W systems by atomistic modeling and ion-beam mixing
29. Phase stability in the Fe-Ni system: Investigation by first-principles calculations and atomistic simulations10.1016/j.actamat.2005.05.001 ↗
30. Interatomic potential for the Cu-Ta system and its application to surface wetting and dewetting10.1103/PhysRevB.77.094131 ↗
31. Stabilization and strengthening of nanocrystalline copper by alloying with tantalum10.1016/j.actamat.2012.01.011 ↗
32. Thin Ta films: growth, stability, and diffusion studied by molecular-dynamics simulations10.1016/S0040-6090(02)00349-8 ↗
33. CASINO V2.42 - A fast and easy-to-use modeling tool for scanning electron microscopy and microanalysis users10.1002/sca.20000 ↗
34. The application of the analytic embedded atom method to BCC metals and alloys10.1557/JMR.1992.0639 ↗
35. Fast Parallel algorithms for short-range molecular-dynamics10.1006/jcph.1995.1039 ↗
36. http://lammps.sandia.gov. LAMMPS—Large-scale Atomic/Molecular Massively Parallel Simulator.
37. Defect production in collision cascades in elemental semiconductors and fcc metals10.1103/PhysRevB.57.7556 ↗
38. Molecular dynamics investigations of surface damage produced by kiloelectronvolt self-bombardment of solids
39. Molecular dynamics with coupling to an external bath10.1063/1.448118 ↗
40. Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
41. Structure identification methods for atomistic simulations of crystalline materials10.1088/0965-0393/20/4/045021 ↗
42. Homogeneity of a supersaturated solid solution10.1103/PhysRevLett.89.125507 ↗
43. International Tables for Crystallography C, 2006, Chap. 6.1, pp 554–595, specifically table 6.1.1.4 and equation 6.1.1.15.
44. On the structure and homogeneity of solid-solutions—the limits of conventional X-Ray diffraction
45. The nature of martensite
46. Angular-dependent interatomic potential for tantalum10.1016/j.actamat.2006.06.034 ↗