journal article·2026-07

Impact of multiple extrusion on LLDPE cast stretch film performance in pallet wrapping

Bram Bamps, Lore Gielkens, Paula Varas Perez, Mieke Buntinx, Felix Fischbeck, Wouter Marchal

Publisher page

Abstract

The upcoming European Packaging and Packaging Waste Regulation (PPWR) mandates at least 35% post-consumer recyclate in non-food packaging by 2030, increasing to 65% by 2040. Consequently, linear low-density polyethylene (LLDPE), the dominant material in stretch films, will likely be subjected to multiple extrusion cycles during recycling. This study investigates the impact of multiple extrusion cycles on film quality via a controlled closed-loop recycling approach. Virgin LLDPE was re-extruded up to 15 times and incorporated into the core of three-layer cast stretch films, with virgin polymer in the outer layers. Seven films (16–27 µm) were produced: a virgin reference and six films containing 35% or 60% regranulate derived from 5, 10, or 15 extrusion cycles. Mechanical performance was evaluated through small-scale testing, film-on-roll evaluation, and full-scale pallet wrapping with transport simulation. Complementary chemical analyses (DSC, GPC, GC-MS) assessed polymer degradation. Results revealed severe deterioration in machine-direction tear resistance, dropping from 5.33 N (virgin film) to 0.70 N (60% regranulate, 15 cycles). Visual inhomogeneities (“gels”) surged from six defects per meter in the virgin film to 139 defects per meter in the 60% 15x film. Chemical characterization confirmed progressive degradation dominated by chain scission and structural heterogeneity, coinciding with a 90% depletion of the Irganox 1076 antioxidant after 15 cycles. Despite this degradation, most films allowed for stable pallet wrapping and transport tests showed no visible decline in performance. The only exception was the 60% 15x film, which failed even at a modest 100% pre-stretch. These findings demonstrate that adequately designed stretch films with high regranulate content can ensure load stability, providing a scientific foundation for meeting future PPWR targets.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer crystallization and properties · Microplastics and Plastic Pollution · Nanocomposite Films for Food Packaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hasselt University

Fraunhofer Institute for Process Engineering and Packaging

Funding

Agency for Innovation and Entrepreneurship · German Federal Ministry for Economic Affairs and Energy · Polish National Centre for Research and Development

References (38)

Show source-provided references
1. Meteor Space. Pallet storage and delivery statistics: important statistics to keep in mind. https://www.meteorspace.com/pallet-storage-and-delivery-statistics-important-statistics/ (n.d. accessed 28 November 2025).
2. European Parliament and Council. Regulation (EU) 2025/40 of 19 December 2024 on packaging and packaging waste amending regulation (EU) 2019/1020 and directive (EU) 2019/904 and repealing directive 94/62/EC. https://data.europa.eu/eli/reg/2025/40/oj (2025 accessed 28 November 2025).
3. HM Revenue & Customs. Plastic packaging tax: guidance collection. https://www.gov.uk/government/collections/plastic-packaging-tax (2023 accessed 28 November 2025).
4. Agencia Tributaria. Special tax on non-reusable plastic packaging: customs formalities. https://sede.agenciatributaria.gob.es/Sede/en_gb/impuestos-especiales-medioambientales/impuesto-especial-sobre-envases-plastico-reutilizables/formalidades-aduaneras-impuesto.html (2023 accessed 28 November 2025).
5. Valipac. myRecycledContent – bonus system for commercial and industrial packaging with recycled plastics. https://www.myrecycledcontent.be (2024 accessed 28 November 2025).
6. 10.1177/875608790203514610.1177/8756087902035146 ↗
7. Brighton TB. Film, stretch. In: Yam KL (ed). Wiley Encyclopedia of Packaging. 3rd ed. John Wiley & Sons, 2009, pp. 500–512.
8. Morris BA. Appendix B: examples of flexible packaging film structures. The Science and Technology of Flexible Packaging. Elsevier, 2017, pp. 697–707.
9. Polifilm. How many layers are enough. Kunstst Int 2017; 10: 71–75.
10. 10.1016/j.polymdegradstab.2011.02.01510.1016/j.polymdegradstab.2011.02.015 ↗
11. 10.1016/j.polymdegradstab.2025.11145810.1016/j.polymdegradstab.2025.111458 ↗
12. 10.3390/polym1614206010.3390/polym16142060 ↗
13. 10.1002/pen.2528710.1002/pen.25287 ↗
14. 10.1007/s00289-021-03599-910.1007/s00289-021-03599-9 ↗
15. 10.1002/pts.268810.1002/pts.2688 ↗
16. 10.1063/1.503498010.1063/1.5034980 ↗
17. 10.1007/s41783-020-00095-910.1007/s41783-020-00095-9 ↗
18. Dunno K, Symanski M. Evaluation of stretch film behavior during long-term storage under different atmospheric conditions. J Appl Packag Res 2021; 13: 3.
19. Leguebe E Huart V Krajka N et al. Effect of wrapping parameters and transport constraints on stretch film properties for freight transport applications. In: Paper presented at the IAPRI Member Conference on Packaging Mumbai India 2023.
20. International Organization for Standardization. Plastics—determination of tensile properties. Part 3: test conditions for films and sheets. ISO, 2018. (ISO 527-3:2018).
21. ASTM International. ASTM D5459-95(2020): Standard test method for machine direction elastic recovery and permanent deformation and stress retention of stretch wrap film. ASTM International, 2020.
22. International Organization for Standardization. Plastics—film and sheeting—Determination of tear resistance (ISO 6383-2:1983). ISO, 2020.
23. Flemish Government. Department of economy science and innovation. Effect of multiple recycling on the properties of polyolefin films (MultiRec) | research portal. https://researchportal.be/en/project/effect-multiple-recycling-properties-polyolefin-films-multirec (accessed 4 December 2025).
24. Bamps B Optimizing pallet stretch wrapping protocol for consistent comparison of stretch film transport performance. In: Proceedings of the ISTA European Packaging Symposium Frankfurt Germany 2024.
25. ASTM International. ASTM D4169-23: standard practice for performance testing of shipping containers and systems. ASTM International, 2023.
26. EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids (CEF). Scientific opinion on the safety evaluation of the substance phosphorous acid, mixed 2, 4-bis(1, 1-dimethylpropyl)phenyl and 4-(1, 1-dimethylpropyl)phenyl triesters, CAS no. 939402-02-5, for use in food contact materials. EFSA J 2011; 9: 2305. https://doi.org/10.2903/j.efsa.2011.230510.2903/j.efsa.2011.2306 ↗
27. 10.1007/s10924-016-0751-110.1007/s10924-016-0751-1 ↗
28. 10.3390/polym1413256910.3390/polym14132569 ↗
29. 10.1016/j.polymdegradstab.2011.02.01510.1016/j.polymdegradstab.2011.02.015 ↗
30. 10.1016/j.polymdegradstab.2023.11048610.1016/j.polymdegradstab.2023.110486 ↗
31. 10.1016/j.resconrec.2021.10582610.1016/j.resconrec.2021.105826 ↗
32. ExxonMobil Chemical. Gels in polyethylene films. https://elastomerx.com/wp-content/uploads/2021/11/tft_gels_in_polyethylene_films_en.pdf (2021 accessed 18 December 2025).
33. Mikkola V. Identifying the causes for gels and voids as web defects, and reducing them in the extrusion coating process. Master’s thesis. Lappeenranta–Lahti University of Technology LUT, 2025.
34. LyondellBasell. A guide to polyolefin film extrusion. https://www.lyondellbasell.com/globalassets/lyb/our-solutions/products/documents/polymers-technical-literature/A_Guide_to_Polyolefin_Film_Extrusion.pdf (2013 accessed 9 December 2025).
35. Equistar Chemicals LP. Preparation of LLDPE films having low gels. European Patent EP 2 609 126 B1. European Patent Office (EPO), 2015.
36. 10.1177/875608791772258610.1177/8756087917722586 ↗
37. 10.1016/j.pmatsci.2016.07.00710.1016/j.pmatsci.2016.07.007 ↗
38. Spalding MA. How screw design can mitigate gels in PE films. https://www.ptonline.com/articles/how-screw-design-can-mitigate-gels-in-pe-films (2022 accessed 18 December 2025).