Ternary blends of thermoplastic starch (TPS) with poly(lactic acid) (PLA) and poly(butylene succinate-co-adipate) (PBSA): Design and processing
Source abstract
Abstract
This paper studies a ternary blend of thermoplastic starch (TPS) with bio-derived polyesters, such as polylactic acid (PLA) and polybutylene succinate-co-adipate (PBSA). The compounds were obtained by means of a co-rotating twin screw extruder and were then reprocessed by cast extrusion and thermoforming in order to obtain films and semi-rigid containers. Semi-finished products (compounds and films) and thermoformed products were characterized by evaluating their thermo-mechanical, physical and chemical properties. The films showed good mechanical strength (E y ∼ 600 MPa, σ b ∼ 15 MPa), adequate stiffness / toughness (Ɛ ∼ 2.5 J) compromise and fair impermeability to oxygen (<30 cm 3 /m 2 day). Furthermore, tests show a high disintegration rate of the designed material with considerable mass loss in ambient composting conditions. On the other hand, the thermoformed containers showed inadequate thermal resistance, performing well up to 80°C and failing to endure direct contact with hot liquids at 100°C.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Carbon dioxide utilization in catalysis · Advanced Polymer Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Dipartimento di Ingegneria Meccanica e Aerospaziale, Sapienza Università Degli Studi di Roma, Roma, Italy
Dipartimento di Ingegneria Industriale, Elettronica e Meccanica, Università Degli Studi Roma Tre, Roma, Italy
References (55)
Show source-provided references
1. 10.1007/978-1-4419-9240-6_710.1007/978-1-4419-9240-6_7 ↗
2. 10.1002/pts.261510.1002/pts.2615 ↗
3. Cappiello G, Aversa C, Genovesi A, et al. Life cycle assessment (LCA) of bio-based packaging solutions for extended shelf-life (ESL) milk. Environ Sci Pollut Res Int 2021.
4. 10.1016/j.fpsl.2021.10074310.1016/j.fpsl.2021.100743 ↗
5. 10.1016/j.resconrec.2017.09.00110.1016/j.resconrec.2017.09.001 ↗
6. 10.1007/s10924-021-02207-110.1007/s10924-021-02207-1 ↗
7. 10.1007/s12221-016-6379-x10.1007/s12221-016-6379-x ↗
8. 10.1016/j.carbpol.2018.07.00810.1016/j.carbpol.2018.07.008 ↗
9. 10.1016/j.heliyon.2019.e0125110.1016/j.heliyon.2019.e01251 ↗
10. 10.1002/app.4799010.1002/app.47990 ↗
11. 10.1016/j.indcrop.2019.11206110.1016/j.indcrop.2019.112061 ↗
12. 10.1016/j.foodhyd.2020.10600610.1016/j.foodhyd.2020.106006 ↗
13. 10.1080/10601325.2021.192083810.1080/10601325.2021.1920838 ↗
14. 10.3390/polym1309139610.3390/polym13091396 ↗
15. 10.1111/jfpe.1244710.1111/jfpe.12447 ↗
16. 10.3390/app1007256110.3390/app10072561 ↗
17. 10.3390/foods1006117110.3390/foods10061171 ↗
18. 10.3390/ma1111213810.3390/ma11112138 ↗
19. 10.3139/217.207010.3139/217.2070 ↗
20. 10.1007/s11367-012-0479-710.1007/s11367-012-0479-7 ↗
21. 10.1021/acs.est.9b0375510.1021/acs.est.9b03755 ↗
22. 10.1016/B978-0-08-100435-7.00003-410.1016/B978-0-08-100435-7.00003-4 ↗
23. 10.1016/j.foodchem.2017.12.06710.1016/j.foodchem.2017.12.067 ↗
24. 10.1016/B978-0-08-100596-5.22471-210.1016/B978-0-08-100596-5.22471-2 ↗
25. 10.1002/app.5085610.1002/app.50856 ↗
26. 10.1016/j.wasman.2014.02.00810.1016/j.wasman.2014.02.008 ↗
27. 10.4028/www.scientific.net/KEM.861.17010.4028/www.scientific.net/KEM.861.170 ↗
28. 10.1016/j.egypro.2013.06.82410.1016/j.egypro.2013.06.824 ↗
29. 10.1016/j.carbpol.2009.01.02410.1016/j.carbpol.2009.01.024 ↗
30. 10.1016/j.polymdegradstab.2009.06.00710.1016/j.polymdegradstab.2009.06.007 ↗
31. 10.1016/j.polymdegradstab.2016.03.01210.1016/j.polymdegradstab.2016.03.012 ↗
32. 10.1002/app.5066910.1002/app.50669 ↗
33. 10.1016/j.carbon.2011.06.00910.1016/j.carbon.2011.06.009 ↗
34. 10.1016/0142-9418(90)90021-510.1016/0142-9418(90)90021-5 ↗
35. 10.1002/pi.581410.1002/pi.5814 ↗
36. 10.3390/polym1302021810.3390/polym13020218 ↗
37. 10.1007/s10853-016-0059-510.1007/s10853-016-0059-5 ↗
38. 10.1002/(SICI)1099-0488(19990701)37:13<1357::AID-POLB2>3.0.CO;2-Q10.1002/(SICI)1099-0488(19990701)37:13<1357::AID-POLB2>3.0.CO;2-Q ↗
39. 10.1002/polb.2058910.1002/polb.20589 ↗
40. 10.3390/polym1003025110.3390/polym10030251 ↗
41. 10.1016/j.polymertesting.2019.10613010.1016/j.polymertesting.2019.106130 ↗
42. 10.1016/j.carbpol.2013.03.02610.1016/j.carbpol.2013.03.026 ↗
43. 10.3390/polym1008081610.3390/polym10080816 ↗
44. 10.1016/j.polymer.2024.12713510.1016/j.polymer.2024.127135 ↗
45. 10.3390/polym1210231710.3390/polym12102317 ↗
46. 10.1016/j.foodcont.2021.10854110.1016/j.foodcont.2021.108541 ↗
47. Pivsa Art S, Thumson S, Pavasupree S, et al. Effect of additive crystallization and mechanical properties of polymer blends of poly(lactic acid) and poly(butylene succinate)-co-adipate. Energy Proc 2013.
48. 10.1002/1097-4628(20010207)79:6<1025::AID-APP50>3.0.CO;2-710.1002/1097-4628(20010207)79:6<1025::AID-APP50>3.0.CO;2-7 ↗
49. 10.1016/j.polymdegradstab.2019.06.02510.1016/j.polymdegradstab.2019.06.025 ↗
50. 10.1016/j.msec.2013.05.05410.1016/j.msec.2013.05.054 ↗
51. 10.1122/1.490571410.1122/1.4905714 ↗
52. 10.1002/app.3672410.1002/app.36724 ↗
53. Wu S. Polymer interface and adhesion. New York: Marcel Dekker, 1982.
54. 10.1002/(SICI)1099-0488(19961130)34:16<2701::AID-POLB2>3.0.CO;2-S10.1002/(SICI)1099-0488(19961130)34:16<2701::AID-POLB2>3.0.CO;2-S ↗
55. 10.1016/j.polymdegradstab.2013.01.00510.1016/j.polymdegradstab.2013.01.005 ↗