Mechanism of ultrasound-induced microstructure modification in Al–Zr alloys
Source abstract
Abstract
Abstract This work probes the effect of ultrasonic melt treatment (UST) on primary intermetallic particles and α-Al using pure Al and Al–Zr alloys (Al–0.3Zr–0.1Ti, Al–0.5Zr, Al–0.5Zr–0.5Mg–0.9Si) solidified at various cooling rates of 0.2–70 K s−1. The application of UST is shown to decrease the size and increase the number density and volume fraction of D023-structured primary Al3Zr and Al3(Zr,Ti) particles with a high nucleation potency for α-Al formation. High-resolution transmission electron microscopy analysis reveals that the cavitation-induced wetting and dispersion of γ-Al2O3 inoculant particles contribute to the refinement of primary intermetallic particles. The grain size of Al–Zr alloys increases with increasing cooling rate because of the concomitantly reduced formation of primary intermetallic inoculant particles. The UST-induced refinement of primary Al3Zr particles and the increased number density lead to grain refinement in Ti-free Al–Zr alloys. For the Ti-containing Al–Zr alloy, UST-induced grain refinement is achieved only at a very low cooling rate of 0.2 K s−1, possibly because of the side effects of UST on the growth-restricting influence of Ti. The fast cooling–induced solidification enables significant age-hardening by L12-Al3Zr nanoprecipitation (~5 nm) and is not affected by UST. Thus, this study shows that UST can be used to reduce the degree of grain coarsening of age-hardenable Al–Zr alloys at high cooling rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Recent advances in grain refinement of light metals and alloys10.1016/j.cossms.2015.10.001 ↗
2. The interdependence theory: the relationship between grain formation and nucleant selection10.1016/j.actamat.2011.04.035 ↗
3. A simple model for grain refinement during solidification10.1016/0001-6160(75)90188-1 ↗
4. A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles10.1016/S1359-6454(00)00368-2 ↗
5. Mechanisms of enhanced heterogeneous nucleation during solidification in binary Al–Mg alloys10.1016/j.actamat.2011.11.044 ↗
6. Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium10.1038/s41598-017-10354-6 ↗
7. Quantitative approach to realization of ultrasonic grain refinement of Al–7Si–2Cu–1Mg alloy10.1038/s41598-019-54161-7 ↗
8. The influence of inter-cooling and electromagnetic stirring above liquidus on the formation of primary Al3Zr and grain refinement in an Al–0.2%Zr alloy10.3390/ma12010022 ↗
9. Improved prediction of the grain size of aluminum alloys that includes the effect of cooling rate10.1016/j.msea.2007.11.009 ↗
10. Modelling of inoculation of metallic melts: application to grain refinement of aluminum by Al–Ti–B10.1016/S1359-6454(00)00094-X ↗
11. Heterogeneous nucleation on potent spherical substrates during solidification10.1016/j.actamat.2006.09.016 ↗
12. Tension interfaciale solide-liquide des systémes Al–Sn, Al–In et Al–Sn–In10.1016/0022-0248(76)90085-3 ↗
13. 1983 · 8
14. The mechanism of grain refinement in dilute aluminum alloys10.1007/BF02913899 ↗
15. A new Al–Zr–Ti master alloy for ultrasonic grain refinement of wrought and foundry aluminum alloys10.1007/s11837-016-2120-x ↗
16. Revisiting the role of peritectics in grain refinement of Al alloys10.1016/j.actamat.2012.09.075 ↗
17. The grain refinement mechanism of cast aluminium by zirconium10.1016/j.actamat.2013.05.044 ↗
18. Structure refinement, mechanical properties and feasibility of deformation of hypereutectic Al–Fe–Zr and Al–Ni–Zr alloys subjected to ultrasonic melt processing10.1016/j.msea.2020.139567 ↗
19. Synergistic effect of ultrasonic melt treatment and fast cooling on the refinement of primary Si in a hypereutectic Al-Si alloy10.1016/j.actamat.2017.10.039 ↗
20. A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al–35Cu alloy induced by ultrasonic melt processing10.1016/j.actamat.2017.09.010 ↗
21. Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound10.1016/j.actamat.2017.10.067 ↗
22. Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy10.1016/j.jcrysgro.2015.11.034 ↗
23. A refining mechanism of primary Al3Ti intermetallic particles by ultrasonic treatment in the liquid state10.1016/j.actamat.2016.06.056 ↗
24. Influence of ultrasonic treatment on formation of primary Al3Zr in Al–0.4Zr alloy10.1016/S1003-6326(17)60115-8 ↗
25. Influence of ultrasonic melt treatment on the formation of primary intermetallics and related grain refinement in aluminum alloys10.1007/s10853-011-5463-2 ↗
26. On the mechanism of grain refinement in Al–Zr–Ti alloys10.1016/j.jallcom.2010.09.046 ↗
27. Criteria of grain refinement induced by ultrasonic melt treatment of aluminum alloys containing Zr and Ti10.1007/s11661-010-0232-4 ↗
28. Cubic to monoclinic phase transformations in alumina10.1016/S1359-6454(97)00040-2 ↗
29. Atomic scale mechanism of the transformation of γ-alumina to θ-alumina10.1103/PhysRevLett.89.235501 ↗
30. Phase dependent thermal and spectroscopic responses of Al2O3 nanostructures with different morphologies10.1039/C5NR02369F ↗
31. Nucleation and precipitation strengthening in dilute Al-Ti and Al-Zr alloys10.1007/s11661-007-9283-6 ↗
32. Eskin · 1998 · 7
33. Automated high precision strain measurement using nanobeam diffraction coupled with precession10.1017/S1431927613005503 ↗
34. On the occurrence of a eutectic-type structure in solidification of Al-Zr alloys10.1016/j.scriptamat.2017.02.027 ↗
35. New insights into solidification and phase equilibria in the Al–Al3Zr system: theoretical and experimental investigations10.1016/j.jallcom.2018.02.023 ↗
36. Ambient- and high-temperature mechanical properties of isochronally aged Al–0.06Sc, Al–0.06Zr and Al–0.06Sc–0.06Zr (at.%) alloys10.1016/j.actamat.2010.10.017 ↗
37. Improving the properties of cold-rolled Al–6%Ni sheets by alloying and heat treatment10.1016/j.scriptamat.2003.09.033 ↗
38. Criteria for developing castable, creep-resistant aluminum-based alloys – A review10.3139/146.101249 ↗
39. Crystallographic features of the primary Al3Zr phase in as-cast Al–1.36 wt% Zr alloy10.1016/j.jcrysgro.2010.12.063 ↗
40. Crystal morphology and growth mechanism of reinforcements synthesized by direct reaction in the system Al–Zr–O10.1016/S0921-5093(03)00474-X ↗
41. Lattice misfit variation of Al3(Ti,V,Zr) in Al–Ti–V–Zr alloys10.1016/0956-716X(91)90082-C ↗
42. Convergent beam electron diffraction study of Al3Zr in Al–Zr and Al–Li–Zr alloys10.1016/0001-6160(87)90295-1 ↗
43. Crystal structure and phase relationships in as-cast and melt spun Al3Ti and Al3Ti plus copper10.1016/0956-716X(91)90013-Q ↗
44. The precipitation of η alumina and its structure
45. Structural studies of transition aluminas. Theta alumina
46. An overview of the effects of biflims on the structure and properties of cast alloys10.1007/BF02735006 ↗
47. Equiaxed grain count in aluminum alloy castings: theoretical background and experimental verification10.1007/s11661-013-1919-0 ↗
48. Modeling the overlap of nucleation, growth and coarsening during precipitation10.1016/j.actamat.2004.06.024 ↗
49. Precipitation sequence in Al–Mg–Si–Sc–Zr alloys during isochronal aging10.1016/j.mtla.2019.100437 ↗
50. Role silicon in accelerating the nucleation of Al3(Sc,Zr) precipitates in dilute Al–Sc–Zr alloys10.1016/j.actamat.2012.05.036 ↗
51. Formation of endogenous MgO and MgAl2O4 particles and their possibility of acting as substrate for heterogeneous nucleation of aluminum grains10.1002/sia.5726 ↗
52. Plastic deformation of single crystals of sapphire: basal slip and twinning10.1016/0001-6160(57)90090-1 ↗
53. Oxidation of aluminium alloy melts and inoculation by oxide particles10.1007/s12666-012-0194-x ↗
54. Correlation between primary Si and silicide refinement induced by ultrasonic treatment of multicomponent Al–Si alloy containing Ti, Zr, V, and P10.1007/s12540-019-00297-0 ↗