Influence of β anisotropy on deformation processes operating in Ti-5Al-5Mo-5V-3Cr at room temperature
Source abstract
Abstract
Abstract In the past, little attention was paid to the effects of the high β fraction retained at room temperature on the deformation behavior of β metastable titanium alloys. As it significantly differs from more conventional α/β alloys, mostly constituted of α phase, a thorough investigation appears as mandatory. This is the aim of the present study through a detailed characterization of the operating deformation processes combined with an evaluation of the strain field heterogeneities. Tensile tests conducted in a scanning electron microscope coupled with markers tracking and electron back-scattered diffraction techniques enabled an in situ monitoring of the early activity of deformation systems. A major influence of the elastic anisotropy of the β phase on the highly heterogeneous deformation behavior was revealed in the elastic and plastic regimes. The underlying mechanisms controlling the onset and the development of plasticity in β metastable titanium alloys are clarified and discussed accordingly.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Lütjering · 2007
2. Line-focus acoustic microscopy of Ti-6242 α/β single colony: determination of elastic constants10.1063/1.1472920 ↗
3. In situ neutron measurements and modelling of the intergranular strains in the near-β titanium alloy Ti-β21S10.1016/j.actamat.2016.02.065 ↗
4. Fatigue crack initiation in alpha-beta titanium alloys10.1016/S0142-1123(97)00047-9 ↗
5. Slip and fatigue crack formation processes in an α/β titanium alloy in relation to crystallographic texture on different scales10.1016/j.actamat.2008.04.036 ↗
6. The role of microtexture on the faceted fracture morphology in Ti–6Al–4V subjected to high-cycle fatigue10.1016/j.actamat.2010.03.036 ↗
7. Local texture and fatigue crack initiation in a Ti-6Al-4V titanium alloy10.1046/j.1460-2695.2002.00480.x ↗
8. Static and fatigue characterization of the Ti5553 titanium alloy10.1111/ffe.12011 ↗
9. Investigation of slip transfer across HCP grain boundaries with application to cold dwell facet fatigue10.1016/j.actamat.2017.01.021 ↗
10. Fatigue crack initiation in as forged Ti–6Al–4V bars with macrozones present10.1016/j.ijfatigue.2015.05.020 ↗
11. An unusual fatigue phenomenon: duality of the S–N fatigue curve in the β-titanium alloy Ti–10V–2Fe–3Al10.1016/S1359-6462(02)00565-1 ↗
12. Duality of the S–N fatigue curve caused by competing failure modes in a titanium alloy and the role of Poisson defect statistics10.1016/j.actamat.2004.12.032 ↗
13. Deformation heterogeneities and their role in life-limiting fatigue failures in a two-phase titanium alloy10.1016/j.actamat.2014.08.034 ↗
14. Comparison of slip system activation in Ti-6Al-2Sn-4Zr-2Mo and Ti-6Al-2Sn-4Zr-6Mo under tensile, fatigue and dwell-fatigue loadings10.1016/j.msea.2017.05.021 ↗
15. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
16. On the influence of ageing on the onset of plastic slip in Ti-6Al-4V at room temperature: insight on dwell fatigue behavior10.1016/j.scriptamat.2016.11.042 ↗
17. Analysis of the different slip systems activated by tension in a α/β titanium alloy in relation with local crystallographic orientation10.1016/j.actamat.2004.09.040 ↗
18. Phenomenological and microstructural analysis of room temperature creep in titanium alloys10.1016/S1359-6454(99)00426-7 ↗
19. Zur Ableitung einer Fliessbedingung
20. A study of active deformation systems in titanium alloys: dependence on alloy composition and correlation with deformation texture10.1016/S0921-5093(02)00421-5 ↗
21. Methodology for estimating the critical resolved shear stress ratios of α-phase Ti using EBSD-based trace analysis10.1016/j.actamat.2013.08.042 ↗
22. In situ monitoring of the deformation mechanisms in titanium with different oxygen contents10.1016/j.msea.2015.03.044 ↗
23. Combination of in-situ SEM tensile test and FFT-based crystal elasticity simulations of Ti-6Al-4V for an improved description of the onset of plastic slip10.1016/j.mechmat.2017.03.013 ↗
24. Effect of retained beta layer on slip transmission in Ti–6Al–2Zr–1Mo–1V near alpha titanium alloy during tensile deformation at room temperature10.1016/j.matdes.2013.12.018 ↗
25. Room temperature deformation and mechanisms of slip transmission in oriented single-colony crystals of an α/β titanium alloy10.1016/S1359-6454(98)00364-4 ↗
26. Compatibility of deformation in two-phase Ti-Al alloys: dependence on microstructure and orientation relationships10.1007/BF02670762 ↗
27. Analysis of slip transfer and deformation behavior across the α/β interface in Ti–5Al–2.5Sn (wt.%) with an equiaxed microstructure10.1016/j.msea.2012.04.114 ↗
28. Determination of Ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity10.1016/j.jmps.2016.06.007 ↗
29. Grain boundaries and interfaces in slip transfer10.1016/j.cossms.2014.05.003 ↗
30. Review on slip transmission criteria in experiments and crystal plasticity models10.1007/s10853-015-9553-4 ↗
31. Prediction of slip transfer mechanisms across grain boundaries10.1016/0036-9748(89)90534-6 ↗
32. Micromechanics of Ti–10V–2Fe–3Al: in situ synchrotron characterisation and modelling10.1016/j.actamat.2007.08.049 ↗