γ’-(L12) precipitate evolution during isothermal aging of a Co Al W Ni superalloy
Source abstract
Abstract
Abstract The coarsening kinetics and elemental partitioning behavior of γ’-(L12) precipitates in a γ(f.c.c.)-matrix for a model quaternary Co-8.8Al-8.9W-9.9Ni at.% superalloy are investigated utilizing isothermal aging conditions at 650, 800 and 900 °C. The γ′-precipitate mean radius, number density, and volume fraction, at 800 and 900 °C, were studied using scanning electron microscopy; the calculated temporal exponents associated with coarsening of γ′-precipitates display good agreement with model predictions for quasi-stationary coarsening. An atom probe tomographic (APT) investigation of the aged γ/γ′ microstructure at 650 °C demonstrates that the compositions and volume fractions of both phases vary continuously up to 4096 h. The aged microstructure at 650 °C consists of interconnected nanoscale γ′-precipitates, corroborated utilizing SEM for the 4096 h aged-specimen. The activation energy for coarsening is estimated for the temperature range 650–900 °C to be 283 kJ mol−1, in reasonable agreement with activation energies for diffusion of Al, W, and Ni in Co, suggesting that coarsening of γ′-precipitates is limited by bulk-diffusion. APT measurements of specimens aged for 1024 h at 800 and 900 °C demonstrate that the isothermal aging temperature has a significant effect on the compositions and partitioning behavior of Co, Al, W and Ni between the γ- and γ′-phases. The partitioning ratio of the concentrations between the γ′- and γ-phases is largest for W, decreasing linearly from 5.3 ± 0.1 at 650 °C to 2.1 ± 1.2 at 900 °C, and smallest for Co, decreasing from 0.86 ± 0.01 at 650 °C to 0.73 ± 0.01 at 900 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Cobalt-base high-temperature alloys10.1126/science.1121738 ↗
2. New Co-based gamma-gamma prime high-temperature alloys
3. Phase equilibria in the Co-rich Co-Al-W-Ti quaternary system10.1016/j.intermet.2011.08.004 ↗
4. The effects of alloying elements (Ta, Hf) on the thermodynamic stability of γ′-Co3(Al,W) phase10.1016/j.intermet.2012.06.006 ↗
5. Improved high temperature γ′ stability of Co–Al–W-base alloys containing Ti and Ta10.1016/j.matlet.2013.09.023 ↗
6. Mechanical properties and lattice misfit of γ/γ′ strengthened Co-base superalloys in the Co–W–Al–Ti quaternary system10.1016/j.intermet.2014.07.006 ↗
7. Elemental partitioning and mechanical properties of Ti- and Ta-containing Co–Al–W-base superalloys studied by atom probe tomography and nanoindentation10.1016/j.actamat.2014.06.020 ↗
8. Effects of quaternary alloying elements on the γ′ solvus temperature of Co–Al–W based alloys with fcc/L12 two-phase microstructures10.1016/j.jallcom.2010.08.050 ↗
9. Partition behavior of alloying elements and phase transformation temperatures in Co–Al–W-base quaternary systems10.1016/j.intermet.2012.07.033 ↗
10. Alloying and the micromechanics of Co–Al–W–X quaternary alloys10.1016/j.msea.2014.05.044 ↗
11. Influence of iridium on the properties of γ′-strengthened Co-base superalloys10.1002/adem.201400266 ↗
12. Influence of Ruthenium on the evolution of precipitates in a model Co-Al-W superalloy10.1016/j.actamat.2016.07.014 ↗
13. Phase equilibria and microstructure on γ′ phase in Co-Ni-Al-W system10.2320/matertrans.MER2008073 ↗
14. Intermediate Co/Ni-base model superalloys — thermophysical properties, creep and oxidation10.1016/j.scriptamat.2015.09.018 ↗
15. Solute partitioning in multi-component γ/γ′ Co–Ni-base superalloys with near-zero lattice misfit10.1016/j.scriptamat.2015.10.039 ↗
16. Regulating the coarsening of the γ′ phase in superalloys10.1038/am.2015.96 ↗
17. Novel wrought γ/γ′ cobalt base superalloys with high strength and improved oxidation resistance10.1016/j.scriptamat.2015.07.030 ↗
18. Creep deformation-induced antiphase boundaries in L12-containing single-crystal cobalt-base superalloys10.1016/j.actamat.2014.04.037 ↗
19. Planar defect formation in the γ′ phase during high temperature creep in single crystal CoNi-base superalloys10.1016/j.actamat.2016.03.077 ↗
20. Coarsening kinetics of γ′ precipitates in cobalt-base alloys10.1016/j.actamat.2013.03.052 ↗
21. Temporal Evolution of a Co-Al-W superalloy aged at 650 °C and 750 °C10.1016/j.actamat.2018.08.014 ↗
22. Metallographic studies of iron Carbide and tungsten Carbide10.1038/181258b0 ↗
23. J.C. Russ, R.T. Dehoff. Practical Stereology. second ed., Plenum Press, New York, NY.
24. Three-Dimensional atom-probe tomography: advances and applications10.1146/annurev.matsci.37.052506.084200 ↗
25. A system for systematically preparing atom-probe field-ion-microscope specimens for the study of internal interfaces10.1063/1.1141590 ↗
26. Analysis of three-dimensional atom-probe data by the proximity histogram10.1007/S100050010051 ↗
27. Measurement of the Gibbsian interfacial excess of solute at an interface of arbitrary geometry using three-dimensional atom probe microscopy10.1016/S0921-5093(01)01885-8 ↗
28. Miller · 2014
29. Atom probe tomography: a technique for nanoscale characterization10.1017/S1431927604040577 ↗
30. A correlative four-dimensional study of phase separation at the subnanoscale to nanoscale of a Ni-Al alloy
31. The kinetics of precipitation from supersaturated solid solutions10.1016/0022-3697(61)90054-3 ↗
32. Theorie der alterung von niederschlagen durch umlosen (Oswald-reifung)
33. The effect of volume fraction on particle coarsening: theoretical considerations10.1016/0001-6160(72)90114-9 ↗
34. Ostwald ripening in ternary alloys10.1007/BF02649761 ↗
35. Ostwald ripening in multicomponent alloys10.1016/j.actamat.2013.03.049 ↗
36. On the nanoscale phase decomposition of a low-supersaturation Ni-Al-Cr alloy10.1080/14786430902806660 ↗
37. Effects of Ruthenium on phase separation in a model Ni-Al-Cr-Ru superalloy10.1080/14786435.2013.765989 ↗
38. Ardell · 1988
39. Ardell · Scripta Metall. Mater. · 1990 · 24 · 34310.1016/0956-716X(90)90267-K ↗
40. Xiao · Acta Metall. Mater. · 1991 · 39 · 65110.1016/0956-7151(91)90133-L ↗
41. Diffusion of solutes in fcc Cobalt investigated by diffusion couples and first principles kinetic Monte Carlo10.1016/j.actamat.2016.01.028 ↗
42. Bakker · 1990
43. Three-Dimensional investigations of Ceramic/metal heterophase interfaces by atom-probe microscopy10.1007/S100050010050 ↗
44. Temporal evolution of the nanostructure and phase compositions in a model Ni–Al–Cr alloy10.1016/j.actamat.2006.03.015 ↗
45. Partitioning and site occupancy of Ta and Mo in Co-base γ/γ′ alloys studied by atom probe tomography10.1016/j.intermet.2014.01.020 ↗
46. Solute partitioning and site preference in γ/γ′ cobalt-base alloys10.1016/j.scriptamat.2012.08.006 ↗
47. Atom-probe tomographic study of γ/γ′ interfaces and compositions in an aged Co–Al–W superalloy10.1016/j.scriptamat.2012.11.035 ↗
48. An atom-probe tomographic study of freckle formation in a nickel-based superalloy10.1016/j.actamat.2011.07.030 ↗
49. Kinetic pathways for phase separation: an atomic-scale study in Ni–Al–Cr alloys10.1016/j.actamat.2011.10.046 ↗
50. The mechanism of morphogenesis in a phase separating concentrated multi-component alloy10.1038/nmat1845 ↗
51. The influence of tungsten on the chemical composition of a temporally evolving nanostructure of a model Ni-Al-Cr superalloy10.1017/S1431927604040589 ↗