Integrated modelling of a 6061-T6 weld joint: From microstructure to mechanical properties
Source abstract
Abstract
Abstract Welding can highly modify the mechanical properties of materials due to the extreme thermal solicitations applied. For precipitation hardened materials, such as aluminium alloy 6xxx, a welding operation implies a modification of the microstructural state and, consequently, of the mechanical properties, both phenomena being highly nonlinear. The purpose of this paper is to propose a methodology to predict the post-welding mechanical properties of a welded joint. For this, three models are coupled: (i) a thermal finite element model of the welded structure that allows the prediction of the material’s thermal history at every point; (ii) a precipitation model to predict the microstructural state in the joint using the thermal history; and (iii) a mechanical model to link the microstructural state to the mechanical properties, i.e. hardness, yield limit and hardening. A coupling between these models and a finite element commercial code is then performed to predict the precipitation state and mechanical properties of a 6xxx-T6 aluminium alloy after welding. To validate this methodology a tensile test is performed on a specimen extracted from a 6061-T6 welded plate. Using Digital Image Correlation, the in-plane strain fields across the weld are measured and compared with the finite element simulation of the tensile test, thereby providing good prediction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Micromechanics of room and high temperature fracture in 6xxx al alloys10.1016/j.pmatsci.2006.06.001 ↗
2. A constitutive model for elastoplastic solids containing primary and secondary voids10.1016/j.jmps.2007.07.008 ↗
3. The crystal structure of the β’ phase in Al-Mg-Si alloys10.1016/S1359-6454(97)00493-X ↗
4. Mechanical properties of 6061 al-mg-si alloy after very rapid heating10.1016/0022-5096(73)90032-X ↗
5. Microstructural modelling in metals processing10.1016/S0079-6425(00)00004-9 ↗
6. Modelling of plastic flow localisation and damage development in friction stir welded 6005a aluminium alloy using physics based strain hardening law10.1016/j.ijsolstr.2010.03.019 ↗
7. Integrated modeling of friction stir welding of 6xxx series Al alloys: process, microstructure and properties10.1016/j.pmatsci.2011.05.003 ↗
8. Modelling of the microstructure and strength evolution in Al-Mg-Si alloys during multistage thermal processing10.1016/j.actamat.2004.07.002 ↗
9. Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy10.1016/j.actamat.2013.09.041 ↗
10. Relationship between microstructure, strength, and fracture in an al-zn-mg electron beam weld: Part ii: mechanical characterization and modeling10.1007/s11661-014-2567-8 ↗
11. Process modelling applied to 6082-t6 aluminium weldments-i. reaction kinetics
12. Evaluation of properties in laser welds of A6061-T6 aluminium alloy10.1080/09507110009549207 ↗
13. Residual stresses induced by electron beam welding in a 6061 aluminium alloy10.1016/j.jmatprotec.2016.04.013 ↗
14. Cyclic behaviour of a 6061 aluminium alloy: coupling precipitation and elastoplastic modelling10.1016/j.actamat.2014.09.034 ↗
15. Characterisation and modelling of precipitate evolution in an Al-Zn-Mg alloy during non-isothermal heat treatments10.1016/S1359-6454(03)00429-4 ↗
16. Decomposition of alloys: the early stages
17. A new finite element model for welding heat sources10.1007/BF02667333 ↗
18. Prediction of laser beam welding-induced distortions and residual stresses by numerical simulation for aeronautic application10.1016/j.jmatprotec.2008.06.051 ↗
19. Sysweld · 2014
20. A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning10.1016/j.jmatprotec.2006.03.159 ↗
21. Crystal plasticity modeling of the through-thickness texture heterogeneity in heavily rolled aluminum10.4028/www.scientific.net/KEM.554-557.1189 ↗
22. Various experimental applications of digital image correlation method
23. Implementation of classical nucleation and growth theories for precipitation10.1016/j.actamat.2007.12.050 ↗
24. Orowan strengthening and forest hardening superposition examined by dislocation dynamics simulations10.1016/j.actamat.2010.06.028 ↗
25. The strength of friction stir welded and friction stir processed aluminium alloys10.1016/j.scriptamat.2007.09.061 ↗
26. Influence of predeformation and ageing of Al-Zn-Mg alloy-II. Modeling of precipitation kinetics and yield stress10.1016/S1359-6454(98)00296-1 ↗
27. Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy10.1016/j.actamat.2011.02.035 ↗
28. A computational method for dislocation-precipitate interaction10.1016/j.jmps.2007.08.002 ↗
29. A review of some plasticity and viscoplasticity constitutive theories10.1016/j.ijplas.2008.03.009 ↗
30. Modelling of friction stir welding of 7xxx aluminium alloys
31. Modelling of the age hardening behaviour of Al-Mg-Si alloys10.1016/S1359-6454(00)00301-3 ↗
32. Precipitation microstructures in an AA6056 aluminium alloy after friction stir welding : characterisation and modelling10.1016/j.msea.2008.06.033 ↗