Multisample Correlation Reveals the Origin of the Photocurrent of an Unstable Cu2O Photocathode during CO2 Reduction
Source abstract
Abstract
The reliable characterization of the photoelectrochemical (PEC) performance of unstable photoelectrodes, often the simplest devices used as a baseline, is a huge challenge. By performing a correlation analysis of more than 100 parameters of Cu 2 O photocathodes electrodeposited under the same conditions, we discovered a strong positive correlation ( R = 0.866) between the photocurrent in argon and the deposition current peak magnitude during electrodeposition, while a strong negative correlation ( R = −0.787) was found in CO 2 . In argon, a positive correlation between the photocurrent during PEC tests and the post-PEC dark current suggests the dominance of photodegradation. In CO 2, the higher photocurrent in PEC tests correlates well with the lower post-PEC dark current, revealing the dominance of photocatalytic CO 2 reduction during the rapid PEC tests. Correlation analysis provides statistically robust insights into the operation of unstable electrodes based on routinely measured parameters and thus constitutes a simple yet previously unexplored methodology for characterizing photoelectrodes within the first minutes of operation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Intelligent Polymer Research Institute and ARC Centre of Excellence for Electromaterials Science, University of Wollongong, Wollongong, New South Wales 2522, Australia
Australian Institute for Innovative Materials, University of Wollongong, Wollongong, New South Wales 2500, Australia
Funding
Centre of Excellence for Electromaterials Science, Australian Research Council
References (36)
Show source-provided references
1. 10.1146/annurev-physchem-032511-14375910.1146/annurev-physchem-032511-143759 ↗
2. 10.1021/acsenergylett.9b0258510.1021/acsenergylett.9b02585 ↗
3. 10.1021/acs.chemrev.8b0048110.1021/acs.chemrev.8b00481 ↗
4. 10.1021/acssuschemeng.8b0630310.1021/acssuschemeng.8b06303 ↗
5. 10.1038/nmat301710.1038/nmat3017 ↗
6. 10.1021/acs.chemrev.5b0049810.1021/acs.chemrev.5b00498 ↗
7. 10.1016/j.apsusc.2015.12.00210.1016/j.apsusc.2015.12.002 ↗
8. 10.1021/acsnano.8b0329310.1021/acsnano.8b03293 ↗
9. 10.1039/c3ta13912c10.1039/c3ta13912c ↗
10. 10.1016/j.apcata.2019.06.00210.1016/j.apcata.2019.06.002 ↗
11. 10.1021/cm960209510.1021/cm9602095 ↗
12. 10.1016/S1359-6462(98)00091-810.1016/S1359-6462(98)00091-8 ↗
13. 10.1149/1.274863210.1149/1.2748632 ↗
14. 10.1016/j.tsf.2006.08.04110.1016/j.tsf.2006.08.041 ↗
15. 10.1063/1.345238310.1063/1.3452383 ↗
16. 10.1021/cm991054e10.1021/cm991054e ↗
17. 10.1021/jp301176y10.1021/jp301176y ↗
18. 10.1002/er.332810.1002/er.3328 ↗
19. 10.1039/c2ee22063f10.1039/c2ee22063f ↗
20. 10.1039/C4EE03454F10.1039/C4EE03454F ↗
21. 10.1021/jacs.5b1215710.1021/jacs.5b12157 ↗
22. 10.1016/j.jphotochemrev.2018.10.00110.1016/j.jphotochemrev.2018.10.001 ↗
23. 10.1016/j.apcatb.2019.11821310.1016/j.apcatb.2019.118213 ↗
24. 10.1021/jacs.9b0623910.1021/jacs.9b06239 ↗
25. 10.1002/cphc.20130008010.1002/cphc.201300080 ↗
26. 10.1016/j.catcom.2013.11.01110.1016/j.catcom.2013.11.011 ↗
27. 10.1038/srep3515810.1038/srep35158 ↗
28. 10.1039/C6EM00694A10.1039/C6EM00694A ↗
29. 10.1016/j.dental.2006.06.00810.1016/j.dental.2006.06.008 ↗
30. 10.1021/acs.accounts.9b0052710.1021/acs.accounts.9b00527 ↗
31. 10.1038/s41563-017-0015-z10.1038/s41563-017-0015-z ↗
32. 10.1016/j.matchemphys.2008.12.01710.1016/j.matchemphys.2008.12.017 ↗
33. 10.1021/jp208535e10.1021/jp208535e ↗
34. 10.1002/cssc.20190135210.1002/cssc.201901352 ↗
35. 10.1016/j.ceramint.2020.07.09110.1016/j.ceramint.2020.07.091 ↗
36. 10.1039/C6FD00183A10.1039/C6FD00183A ↗