Unidirectional solidification of Zn-rich Zn–Cu peritectic alloys—II. Microstructural length scales

Abstract Experimental results are presented of solidification microstructure length scales including η-phase cell spacing, primary e secondary dendrite arm spacing, size of nonaligned dendrite of primary e, and volume fraction of primary e, as functions of alloy concentration (containing up to 7.37 wt% Cu) and growth velocity (ranging from 0.02 to 4.82 mm/s) in the unidirectional solidification of Zn-rich Zn–Cu peritectic alloys. Intercellular spacing (λ) of two-phase cellular structure decreases with increasing growth velocity (V) such that λV1/2 is constant at a fixed alloy concentration in parametric agreement with the KGT and Hunt–Lu models. The value of λV1/2 varies from 216±10 to 316±55 μm3/2/s1/2 with decrease in alloy concentration from 4.94 to 2.17 wt% Cu. These values are much greater than for normal eutectic systems but comparable with monotectic alloys. Dendritic secondary arm spacing (λ2) of primary e decreases with increasing V such that λ2V1/3 is constant ranging 14.9±0.9 to 75.6±8.1 μm4/3/s1/3 with increase in alloy concentration (C0) from 2.17 to 7.37 wt% Cu, which is in parametric agreement with predictions of arm-coarsening theory. The volume fraction (fe) of primary e increases with increasing V for Zn-rich Zn–3.37, 4.94 and 7.37 wt% Cu hyperperitectic alloys. Predictions of the Scheil and Sarreal–Abbaschian models show good agreement with the observed fe for Zn–4.94 wt% Cu at moderate V from 0.19 to 2.64 mm/s, but fail at low V of less than 0.16 mm/s and at high V of greater than 3.54 mm/s. The measured average size, Λ, of nonaligned dendrites of primary e decreases with increasing V such that ΛV1/2 is constant for a given alloy, increasing from (0.98±0.04)×103 to (7.2±0.7)×103 μm3/2/s1/2 with increase in alloy concentration from 2.17 to 4.94 wt% Cu.