journal article·2026-05-01Open access

Manufacturing, characterization and accelerated weathering of biocomposite made of poly (β-hydroxybutyrate)-co-poly(β-hydroxyvalerate) and non-woven alfa fibers

Yousra Abdallah, Ridha Ben Cheikh

Abstract

This article investigates the feasibility of manufacturing a biocomposite composed of a biopolymer, poly (β-hydroxybutyrate-co-β-hydroxyvalerate) (PHBV), reinforced with cellulose nonwoven Alfa fibers. To better understand the behavior of this composite, accelerated weathering tests were conducted. To simulate extreme environmental conditions, composite samples were exposed to cyclic ultraviolet (UV) light, water spray, heat, and high relative humidity. The tensile and physical properties (mass and cross-sectional dimensions) of the composites were evaluated throughout the aging process. Changes in elastic modulus, stress, strain, as well as mass, width, and thickness were recorded. The study revealed the effects of accelerated weathering on PHBV–Alfa composites. Overall, the samples exhibited a relative decrease in physical and mechanical properties, except for the elastic modulus, which showed a slight increase toward the end of the test. Furthermore, the main degradation mechanisms responsible for the observed property reductions were identified as photolysis, hydrolysis, and photooxidation of the polymer surface, along with fiber–matrix interface deterioration caused by swelling of Alfa cellulosic fibers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Natural Fiber Reinforced Composites · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Université Tunis El Manar

Groupe Polytech Intl

References (40)

Show source-provided references
1. Geissdoerfer M, Savaget P, Bocken NMP, et al. The relationship between circular economy and sustainable business models. Journal of Cleaner Production 2021; 316: 128058.
2. 10.1007/s10163-017-0586-410.1007/s10163-017-0586-4 ↗
3. Niero M, Hauschild M. Circular economy strategies for plastics and vehicles: A critical review. Resources, Conservation & Recycling 2021; 168: 105287.
4. 10.3390/ma1703076810.3390/ma17030768 ↗
5. 10.3390/ma1701005510.3390/ma17010055 ↗
6. 10.3390/polym1312197510.3390/polym13121975 ↗
7. 10.1016/j.compositesb.2024.11173810.1016/j.compositesb.2024.111738 ↗
8. 10.1007/s42114-025-01314-010.1007/s42114-025-01314-0 ↗
9. 10.3390/polym1505122910.3390/polym15051229 ↗
10. 10.1016/j.apmt.2025.10266610.1016/j.apmt.2025.102666 ↗
11. 10.1016/j.compositesa.2015.08.03810.1016/j.compositesa.2015.08.038 ↗
12. 10.3390/polym1614207010.3390/polym16142070 ↗
13. 10.1007/s00289-024-05187-z10.1007/s00289-024-05187-z ↗
14. Evans W, Suddell B. Natural fibers composites in automotive applications. In: Natural fibers, Biopolymers and Biocomposites. CRC Press, 2005, pp. 231–259.
15. 10.1007/s10570-017-1261-610.1007/s10570-017-1261-6 ↗
16. 10.3139/217.365210.3139/217.3652 ↗
17. 10.4236/ampc.2014.4601410.4236/ampc.2014.46014 ↗
18. Vermeulen B, Ben Youssif Y, Perwuelz A, et al. Réalisation d’un composite à base de fibres d’alfa. In: Revue des Composites et Matériaux Avancés, Polymères et Fibres Végétales, 2008, pp. 139–144.
19. 10.1016/j.compscitech.2005.10.00610.1016/j.compscitech.2005.10.006 ↗
20. Ben Cheikh R, Ben Brahim S. The alfa fibers in composite materials. In: Proceedings of the 13th International Conference on Composite Materials (ICCM-13). , 2001.
21. 10.1515/ipp-2020-400410.1515/ipp-2020-4004 ↗
22. Tianan BI. ENMAT Injection Molding Grade Y1000P. Technical Data Sheet, 2011.
23. 10.1002/pc.2282910.1002/pc.22829 ↗
24. ASTM. ASTM G151: Standard practice for exposing nonmetallic materials in accelerated test devices that use laboratory light sources. ASTM International, 2009.
25. ASTM. ASTM G155: Standard practice for operating xenon arc light apparatus for exposure of non-metallic materials. ASTM International, 2005.
26. ASTM. ASTM D638: Standard test method for tensile properties of plastics. ASTM International, 2008.
27. Masseteau B, Roy A, Michaud F, et al. Bio-based composites for light aircrafts: Modelling of elastic tensile modulus. In: AMAC. 17ème Journées Nationales sur les Composites, 2011, vol 78.
28. Krenchel H. Fibre Reinforcement: Theoretical and Practical Investigations of the Elasticity and Strength of Fibre-Reinforced Materials. Akademisk Forlag, 1964.
29. 10.1016/j.compscitech.2006.06.01910.1016/j.compscitech.2006.06.019 ↗
30. 10.3390/polym1714199610.3390/polym17141996 ↗
31. 10.3390/polym1520412110.3390/polym15204121 ↗
32. 10.1016/j.compscitech.2014.08.01010.1016/j.compscitech.2014.08.010 ↗
33. Stark NM. Changes in wood flour/HDPE composites after accelerated weathering with and without water spray. In: 2nd Wood Fiber Polymer Composites Symposium, Bordeaux, France (1–12), 2005.
34. 10.1177/08927057000130020410.1177/089270570001300204 ↗
35. 10.1007/s10924-006-0029-010.1007/s10924-006-0029-0 ↗
36. 10.1039/C9RA09554C10.1039/C9RA09554C ↗
37. Cheng Q, Lu M, He Y. Progress in PHBV-based composites for sustainable materials. Materials Today Sustainability 2022; 17: 100112.
38. Zhang Z, Dhakal HN, Musthaq MA. Degradation of fiber/matrix interface under various environmental and loading conditions: Insights from molecular simulations. Composites Part B: Engineering 2023; 247: 110351.
39. 10.1016/j.polymdegradstab.2009.08.00810.1016/j.polymdegradstab.2009.08.008 ↗
40. 10.36909/jer.v9i2.869910.36909/jer.v9i2.8699 ↗