Modeling damage accumulation to fracture in a magnesium-rare earth alloy
Source abstract
Abstract
Abstract A micromechanics-based continuum damage model is employed to rationalize key experimental trends in the fracture of a Mg-Y-RE alloy. The model has three components: (i) a phenomenological law of strain-controlled void nucleation; (ii) a void growth part that accounts for microcrack blunting; and (iii) a void coalescence part that determines fracture. Plastic flow in the undamaged state is represented by J 2 theory with isotropic hardening. The material parameters involved in the model consist of (i) the hardening parameters, (ii) the initial values of microstructural variables associated with damage, and (iii) one adjustable parameter entering the microcrack opening rate equation. An experimental procedure for determining the material parameters is outlined. The model enables several hypotheses to be explored. It is found that when the volume fraction, aspect ratio and spatial arrangement of initially nucleated microcracks are associated with second-phase particles on the grain boundaries, the fracture strains are well predicted over a range of stress triaxialities using a single heuristic parameter that governs the rate of microcrack blunting. Implications are discussed in the broader context of high-strength materials failing after limited void growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Plasticity of magnesium crystals
2. Preface to the viewpoint set on: the current state of magnesium alloy science and technology10.1016/j.scriptamat.2010.06.029 ↗
3. Solute segregation and texture modification in an extruded magnesium alloy containing gadolinium10.1016/j.scriptamat.2011.08.012 ↗
4. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg-Y alloys10.1016/j.actamat.2010.08.031 ↗
5. Role of solute in the texture modification during hot deformation of Mg-rare earth alloys10.1007/s11661-011-0923-5 ↗
6. Ductility improvement of Mg alloys by solid solution: Ab initio modeling, synthesis and mechanical properties10.1016/j.actamat.2014.02.011 ↗
7. Notch tensile behavior of extruded Mg-Y-Zn alloys containing long period stacking ordered phase10.1016/j.matdes.2013.11.035 ↗
8. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
9. Effect of stress triaxiality on the flow and fracture of Mg alloy AZ3110.1007/s11661-014-2211-7 ↗
10. Fracture strains, damage mechanisms and anisotropy in a magnesium alloy across a range of stress triaxialities10.1007/s11340-013-9812-8 ↗
11. On plastic flow in notched hexagonal close packed single crystals10.1016/j.jmps.2016.04.023 ↗
12. On the notch ductility of a magnesium-rare earth alloy10.1016/j.msea.2015.08.077 ↗
13. Tensile fracture characterization of metals under hydrostatic pressures to 23 kilobars10.1016/0001-6160(66)90214-8 ↗
14. Twinning and the ductility of magnesium alloys Part II. “contraction” twins10.1016/j.msea.2007.02.109 ↗
15. The role of deformation twinning in the fracture behavior and mechanism of basal textured magnesium alloys10.1016/j.msea.2014.02.010 ↗
16. Strength and ductility with {101¯1}–{101¯2} double twinning in a magnesium alloy10.1038/ncomms11068 ↗
17. Microstructure and damage evolution during tensile loading in a wrought magnesium alloy10.1016/j.scriptamat.2011.01.029 ↗
18. Effect of Y, Sr, and Nd additions on the microstructure and microfracture mechanism of squeeze-cast AZ91-X magnesium alloys10.1007/s11661-998-0249-0 ↗
19. In situ fracture observation and fracture toughness analysis of squeeze cast AZ51-xSn magnesium alloys10.1016/j.msea.2010.07.016 ↗
20. Failure of magnesium sheets under monotonic loading: 3d examination of fracture mode and mechanisms10.1007/s10704-013-9863-y ↗
21. Ductile fracture by void growth to coalescence10.1016/S0065-2156(10)44003-X ↗
22. Ductile failure modeling10.1007/s10704-016-0142-6 ↗
23. Anisotropic ductile fracture. Part II: Theory10.1016/j.actamat.2004.06.019 ↗
24. Grain boundary versus transgranular ductile failure10.1016/S0022-5096(02)00102-3 ↗
25. Measurement of number and average size in volume
26. Anisotropic ductile fracture. Part I: Experiments10.1016/j.actamat.2004.06.020 ↗
27. Effect of aging precipitation on mechanical anisotropy of an extruded Mg-Y-Nd alloy10.1016/j.matdes.2011.08.043 ↗
28. Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets10.1016/j.scriptamat.2009.12.033 ↗
29. The texture and anisotropy of magnesium-zinc-rare earth alloy sheets10.1016/j.actamat.2006.11.013 ↗
30. Effect of microstructure on the uniaxial tensile deformation behavior of Mg-4Y-3RE alloy10.1016/j.msea.2013.10.009 ↗
31. Precipitation behavior of Mg-Y-Nd-Zr alloy10.4028/www.scientific.net/MSF.449-452.649 ↗
32. Phase relationships in the neodymium-magnesium alloy system10.1007/BF02647869 ↗
33. Thermodynamic modeling of the Mg-Ce-Gd-Y system10.1016/j.scriptamat.2010.01.035 ↗
34. Experimental investigation and thermodynamic calculation of phase relations in the Mg-Nd-Y ternary system10.1016/j.msea.2006.11.048 ↗
35. Influence of sand-casting parameters on microstructure and properties of magnesium alloys10.2478/amm-2013-0050 ↗
36. A constitutive model for plastically anisotropic solids with non-spherical voids10.1016/j.jmps.2010.03.007 ↗
37. Numerical assessment of an anisotropic porous metal plasticity model10.1016/j.mechmat.2015.02.004 ↗
38. Void nucleation effects in biaxially stretched sheets10.1115/1.3224807 ↗
39. Recent extensions of Gurson's model for porous ductile metals. Part I: Gurson-like models incorporating the influence of void shape
40. Constitutive relations and their time integration for anisotropic elasto-plastic porous materials10.1016/j.cma.2016.06.005 ↗
41. Effective yield criterion accounting for microvoid coalescence10.1115/1.4024908 ↗
42. On void coalescence under combined tension and shear10.1115/1.4030326 ↗
43. A unified criterion for the growth and coalescence of microvoids10.1016/j.jmps.2016.01.013 ↗
44. A new model for void coalescence by internal necking10.1177/1056789508101918 ↗
45. Void growth and coalescence in anisotropic plastic solids10.1016/j.ijsolstr.2011.02.020 ↗
46. Void nucleation in astrology: theory and experiments10.1016/0001-6160(81)90008-0 ↗
47. Micromechanics of coalescence in ductile fracture10.1016/S0022-5096(01)00125-9 ↗
48. Continuum theory of ductile rupture by void nucleation and growth: Part I—Yield criteria and flow rules for porous ductile media10.1115/1.3443401 ↗
49. Analysis of the cup-cone fracture in a round tensile bar10.1016/0001-6160(84)90213-X ↗
50. Effect of void locking by inclusions upon the plastic behavior of porous ductile solids–I: theoretical modeling and numerical study of void growth10.1016/S0749-6419(03)00018-4 ↗
51. Magnesium Elektron Ltd · 2011