journal article·2016-08Open access

On the process of co-deformation and phase dissolution in a hard-soft immiscible Cu Co alloy system during high-pressure torsion deformation

A. Bachmaier, J. Schmauch, H. Aboulfadl, A. Verch, C. Motz

Acta Materialia· Volume 115

Abstract

In this study, dual phase CuCo composites with a total immiscibility in the solid state and a very different initial phase strength are deformed by severe plastic deformation. Nanocrystalline supersaturated solid solutions are reached in all CuCo composites independent of the initial composition. The deformation and mechanical mixing process is studied thoroughly by combining scanning electron microscopy, transmission electron microscopy, three-dimensional atom probe tomography and nanoindentation. The indentation hardness of the Cu and Co phase and its evolution as a function of the applied strain is linked to deformation and mechanical mixing process to gain a better understanding how the phase strength mismatch of the Cu and Co phase effects the amount of co-deformation and deformation-induced mixing. Our results show that co-deformation is not a necessary requirement to achieve mechanical mixing.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Magnetic properties of nanostructured materials10.1021/cm960077f ↗
2. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
3. The innovation potential of bulk nanostructured materials10.1002/adem.200700078 ↗
4. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
5. Stability aspects of bulk nanostructured metals and composites10.1007/s10853-006-0986-7 ↗
6. Bulk mechanical alloying of Cu–Ag and Cu/Zr two-phase microstructures by accumulative roll-bonding process10.1016/j.actamat.2006.12.027 ↗
7. Nanostructure and properties of a Cu-Cr composite processed by severe plastic deformation10.1016/j.scriptamat.2008.02.010 ↗
8. The formation of supersaturated solid solutions in Fe–Cu alloys deformed by high-pressure torsion10.1016/j.actamat.2011.10.044 ↗
9. Influence of powder consolidation methods on the structural and thermal properties of a nanophase Cu-50wt%Ag alloy10.1016/0965-9773(95)00077-1 ↗
10. Phase transitions during high pressure torsion of Cu–Co alloys10.1016/j.matlet.2013.12.042 ↗
11. Three-dimensional atom probing of supersaturated mechanically alloyed Cu–20at.% Co10.1016/S0921-5093(01)01875-5 ↗
12. Formation of thermodynamically unstable solid solutions in the Cu–Co system by mechanical alloying10.1103/PhysRevB.48.13244 ↗
13. Magnetic properties of FexCu100−x solid solutions10.1103/PhysRevB.33.3247 ↗
14. Reentrant magnetic behavior in fcc Co-Cu alloys10.1103/PhysRevB.43.8089 ↗
15. “Devil’s staircases” in bulk-immiscible ultrathin alloy films10.1103/PhysRevLett.88.186101 ↗
16. Nanogranulation process into magneto-resistant Co–Cu alloy on the route of bulk mechanical alloying10.1016/S0921-5093(00)00709-7 ↗
17. Change in magnetic property of Cu–6.5 mass%Co alloy through processing by ECAP10.2320/matertrans.ME200725 ↗
18. Effect of severe plastic deformation on the coercivity of Co–Cu alloys10.1080/09500830903246268 ↗
19. Mechanical properties of a nanocrystalline Co–Cu alloy with a high-density fine nanoscale lamellar structure10.1016/j.scriptamat.2007.12.013 ↗
20. Giant magnetoresistance in heterogeneous Cu–Co alloys10.1103/PhysRevLett.68.3745 ↗
21. Giant magnetoresistance in melt spun Cu–Co alloys10.1063/1.109511 ↗
22. Phase separation of a supersaturated nanocrystalline Cu–Co alloy and its influence on thermal stability10.1016/j.actamat.2015.05.053 ↗
23. Non-equilibrium intermixing and phase transformation in severely deformed Al/Ni multilayers10.1016/j.scriptamat.2006.10.021 ↗
24. Deformation behavior and microstructural evolution of Cu–Ag alloys processed by high-pressure torsion10.1002/adem.201500109 ↗
25. Characterization of tungsten fragmentation in a W-25%Cu composite after high-pressure torsion10.1016/j.matchar.2006.08.001 ↗
26. The mechanism of mechanical alloying10.1007/BF02644161 ↗
27. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
28. Deformation-assisted decomposition of unstable Fe50Cu50 solid solution during low-energy ball milling10.1016/S1359-6454(98)00428-5 ↗
29. Phase strength effects on chemical mixing in extensively deformed alloys10.1016/j.actamat.2014.09.009 ↗
31. Mechanical alloying of brittle components: silicon and germanium10.1016/0036-9748(87)90218-3 ↗
32. Structural evolution and strain induced mixing in Cu-Co composites studied by transmission electron microscopy and atom probe tomography10.1016/j.matchar.2014.12.022 ↗
33. Simon · 1992
34. Sanderson · 1965
35. Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion10.1016/j.msea.2007.05.083 ↗
36. On the remarkable thermal stability of nanocrystalline cobalt via alloying10.1016/j.msea.2014.11.062 ↗
37. Microstructural evolution in immiscible alloys processed by high-pressure torsion10.1088/1757-899X/63/1/012023 ↗
38. Shear induced chemical mixing in heterogeneous systems10.1016/j.actamat.2011.11.014 ↗
39. Two-phase coexistence in Fe-Cu alloys synthesized by ball milling10.1016/S1359-6454(97)00481-3 ↗
40. Basic aspects of the co-deformation of bcc/fcc materials10.1016/S0921-5093(99)00477-3 ↗
41. Forced chemical mixing in alloys driven by plastic deformation10.1103/PhysRevLett.95.045901 ↗
42. Forced chemical mixing at Cu-Nb interfaces under severe plastic deformation10.1557/jmr.2012.106 ↗
43. Atomic mixing in metals under shear deformation10.1007/s11837-012-0542-7 ↗
44. Forced chemical mixing in immiscible alloys during severe plastic deformation at elevated temperatures10.1016/j.actamat.2009.03.007 ↗
45. Nanoindentation analysis as a two-dimensional tool for mapping the mechanical properties of complex surfaces10.1557/jmr.2009.0149 ↗
46. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
47. A general protocol for the reconstruction of 3D atom probe data10.1016/0169-4332(94)00561-3 ↗
48. Tabor · 1951
49. Saturation of fragmentation during severe plastic deformation10.1146/annurev-matsci-070909-104445 ↗
50. Microstructural evolution, microhardness and thermal stability of HPT-processed Cu10.1016/S0921-5093(00)00919-9 ↗
51. Atomistic simulation studies on deformation mechanism of nanocrystalline cobalt10.1016/j.actamat.2005.04.038 ↗
52. Equivalent strains in severe plastic deformation10.1002/adem.200310085 ↗
53. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
54. Some geometrical relations in dislocated crystals10.1016/0001-6160(53)90054-6 ↗
55. A phenomenological theory for strain gradient effects in plasticity10.1016/0022-5096(93)90072-N ↗
56. Bounds and estimates for linear composites with strain gradient effects10.1016/0022-5096(94)90016-7 ↗
57. Axial and radial interface instabilities of copper/tantalum cylindrical conductors10.1016/S1359-6454(99)00126-3 ↗
58. Microstructural stability of stressed lamellar and fiber composites10.1016/S1359-6454(96)00413-2 ↗
59. Multilayer film stability10.1063/1.366347 ↗
60. Thermal stability and grain growth behavior of mechanically alloyed nanocrystalline Fe-Cu alloys10.1063/1.353890 ↗
61. Reversible grain size changes in ball-milled nanocrystalline Fe–Cu alloys
62. Solid-state alloying in nanostructured binary systems with positive heat of mixing10.1016/S0921-5093(00)00674-2 ↗
63. Microscopic model for mechanical alloying10.4028/www.scientific.net/MSF.269-272.665 ↗
64. Mechanical alloying and amorphization in Cu–Nb–Ag in situ composite wires studied by transmission electron microscopy and atom probe tomography10.1016/j.actamat.2009.07.028 ↗
65. A statistical theory of solid solution hardening10.1002/pssb.19700410221 ↗
66. Statistische theorien der mischkristallhärtung10.1016/0001-6160(72)90085-5 ↗
67. Stacking faults and crystallite size in mechanically alloyed Cu-Co10.1016/0965-9773(95)00088-7 ↗